You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Generating Autoclave-Level Mechanical Properties with Out-of-Autoclave Thermoplastic Placement of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: T702

    While in the 1970's and 1980's, composites were adopted for aerospace structure for increased performance and weight savings, the 1990's and 2000's witnessed the attention towards cost-effective fabrication. All thermoset processes that utilize such machines rely on autoclaves to consolidate the laminates, at significant acquisition and operational expense. Autoclaves to consolidate wings are hu ...

    STTR Phase II 2009 National Aeronautics and Space Administration
  2. Tailoring Training for Disparately Skilled Participants in Large Scale Training Exercises

    SBC: ADVANCED INFONEERING, INC.            Topic: N09T007

    Large scale training exercises involve many trainees at various stages of their training maturity and at various levels of skill. Problems arise in large scale exercises when less mature or lower skilled trainees are exposed to training scenarios that are too advanced or too complex for their level of training maturity. These trainees are more likely to fail the mission they are given in the train ...

    STTR Phase I 2009 Department of DefenseNavy
  3. Physiological-based Tools for Virtual Environment Fidelity Design Guidance

    SBC: ADVANCED INFONEERING, INC.            Topic: N07T028

    This proposal describes the proposed implementation of the concept of the Quality of Training Effectiveness Assessment (QTEA) system. This concept was developed in Phase I (N074-028-0065). Currently, VE design is guided by subjective design models that involve multiple design iterations and focus on trial and error. Our approach is innovative and new because it quantifies VE fidelity requirements ...

    STTR Phase II 2009 Department of DefenseNavy
  4. Development of a digital photorefractor to detect amblyogenic risk factors

    SBC: VIVAKOR, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): If left undetected and untreated, reduced vision in one eye can lead to monocular blindness in an amblyopic eye. Most vision screening is conducted on children once they have started kindergarten; this is after the critical detection period for the treatment of amblyopia. Early detection is essential for favorable prognosis. Unfortunately less than 21% of pre-k ...

    SBIR Phase I 2009 Department of Health and Human ServicesNational Institutes of Health
  5. A Novel Noninvasive Microwave Sensor for Quantitative Assessment of Degree of Sensitization in Marine Aluminum Alloys

    SBC: ALPHASENSE, INC.            Topic: N09T022

    In this proposal, AlphaSense, Inc. (AI) and the Pennsylvania State University (PSU) detail the development of a novel noninvasive microwave sensor to quantify the DoS in marine aluminum alloys. The key innovations of this proposal include the following: a) DoS quantifications based on the correlation between the surface resistivity with the microstructures of the aluminum alloys, b) measurements o ...

    STTR Phase I 2009 Department of DefenseNavy
  6. A Novel Microwave Sensor for Non- Destructive Evaluation of Silicon Nitride Bearing Balls

    SBC: ALPHASENSE, INC.            Topic: AF083109

    In this proposal, Alphasense, Inc. details the development of a novel microwave NDE sensor for defect inspections in silicon nitride bearing balls. The key innovations of this proposal include the following: a) the use of the spherical bearing ball as a dielectric resonator, thus enabling us to correlate the resonance characteristics of the bearing ball with various defects; b) the measurements in ...

    SBIR Phase I 2009 Department of DefenseAir Force
  7. Innovative Real Time Probes for Plastic Bonded Exp

    SBC: ALPHASENSE, INC.            Topic: A09026

    In this proposal, AlphaSense, Inc. proposes to develop an innovative real time probe for online monitoring of plastic bonded explosive manufacturing process. Key innovations of the proposed sensor probe include: a) the use of a white light interferometer (WLI) to form real time images of the particles for accurate particle size measurements, and b) the use of quartz crystal microbalance (QCM) base ...

    SBIR Phase I 2009 Department of DefenseArmy
  8. A New Approach to Diamond-Based High Heat Load Monochromators

    SBC: Applied Diamond, Inc.            Topic: 06a

    Several hundred beam lines are used around the world at today¿s third-generation synchrotron facilities. These facilities must deal with monochromator-based performance problems due to high heat load. Many have resorted to the use of costly, complicated, high maintenance cryogenic cooling of silicon crystals. Single crystal diamond monochromators present an advantage over the silicon crystals ...

    SBIR Phase I 2009 Department of Energy
  9. SBIR Phase I: Continuous Near Infrared Monitor for Pichia Pastoris Bioreactors

    SBC: ASL Analytical, Inc.            Topic: BC

    This Small Business Innovation Research (SBIR) Phase I project will develop sensing technology capable of continuously monitoring concentrations of critical metabolites during protein expression with the yeast Pichia pastoris. Presently, continuous monitoring is unavailable and this process is controlled using time consuming and labor intensive off-line analyses. This sensing technology uses near ...

    SBIR Phase I 2009 National Science Foundation
  10. Nano-Passivation of GaSb/InAs Strained Layer Superlattices Infrared Detector

    SBC: B & W TEK INC            Topic: A08103

    Mid-infrared (MWIR, wavelength ~10 micron) imaging has significant importance in military surveillance and target recognition, since human body radiation peaks in MWIR. The GaSb/InAs type-II Strained Layer Superlattice (SLS) MWIR detector has been under intensive investigation recently. While much progress has been made to enhance wavelength coverage, one of the few remaining issues has been its r ...

    SBIR Phase I 2009 Department of DefenseArmy
US Flag An Official Website of the United States Government