Award Data

During Phase 1 Atometric developed and demonstrated principles of a four-axis micro machine. This machine is capable of machining metal parts that are sized within 50mm cube to an accuracy within one micron. Our goal is to develop a micro machine that is applicable to a broad commercial market. Three additional features need to be added to make the machine fully commercially viable. These three fe ...

Application of a unique separator material, ceramic fiber separator (CFS), developed by Inventek, can serve as the foundation for advanced thermal batteries to triple EKV battery capacity at high power. A new rapid method of thin-cell production would use the fiber separator CFS as a carrier for tapecast cell assembly and reduce unit cost by 25%. In this method, a tunnel kiln process can produce ...

A need exists to develop cost effective and reliable submersible cage technology for exposed aquaculture. The team assembled as part of this SBIR incorporates JPS Industries, Great Bay Aquafarms and the University of New Hampshire. In Phase I, a design will be developed based on concepts known to work in the industry. Concepts to be investigated include a cage constructed around HDPE pipe, with ...

The projected cost for the Mentis Sciences, Inc., (MSI) prototype PAC3 radome is 1/6th of the total cost of the present system. A Pareto analysis of the current MSI process indicates that the two largest costs in radome production are the direct labor associated with fabrication and the cost of the raw materials. In Phase I MSI demonstrated that COTS paint spraying technology reduced the direct ...

We investigate the development of a secure fuselet runtime environment built on a foundation of aspect-oriented web services. Aspect-oriented techniques enable the modularization of crosscutting concerns such as remote access, security, and monitoring using code instrumentation. We compose aspect-oriented instrumentation with web service technologies in a noninvasive and orthogonal manner, and lev ...

The current methodology for testing the penetration resistance of textile materials to various chemical agents has a number of drawbacks, including significant uncertainties in the resulting data, inefficiency and expense, risk to test personnel, and limited range of test conditions. The objective of the proposed work is to apply unique computer models for textiles with accompanying experimental ...

Advanced space-borne infrared detectors require cooling at temperatures near 10 K. Cooling loads for these detectors will range from 0.25 W to 1.0 W at 10 K, with additional loads at higher temperatures. A multistage cooler, capable of cooling multiple loads, will offer large potential gains in system efficiency and weight. Turbomachine-based Brayton cryocoolers are ideal candidates for these m ...

Lithium oxyhalide batteries offer energy densities several times higher than thermal batteries. Like thermal batteries, lithium oxyhalide batteries have unactivated storage lives in excess of 20 years and are mechanically rugged. Some of the main advantages that lithium oxyhalide batteries offer are flat discharge voltage profiles and potentially long operating lives. However, battery performanc ...

Bearing failure in satellite applications is related to lubricant starvation rather than fatigue, and health monitoring systems for these applications must be able to observe subtle changes related to lubrication state. Phase I included an experimental study to identify candidate monitoring approaches, and the data collected confirmed that cage motion characteristics and instability are highly sen ...

Solid State Scientific Corporation proposes an triangular barrier photodiode (TBPD) detector for use on a dual mode sensor. The TBPD will function as a passive low-light visible-SWIR imager at long range and as a 3-D LADAR sensor at short range. The TBPD has the advantage of increased optical gain with decreased incident power, making it very attractive for applications with weak target signals, ...