You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. GaN Substrate Technology

    SBC: KYMA TECHNOLOGIES, INC.            Topic: N/A

    Kyma Technologies will develop a cost-effective technique to grow high-quality gallium nitride (GaN) by developing a high growth rate process for creating crystalline GaN boules, which are used as a starting material for semiconductor device manufacturing. Currently, growing boules from GaN seeds is slow, expensive, and inconsistent, which negatively affects manufacturing yield and electronic devi ...

    SBIR Phase II 2014 Department of EnergyARPA-E
  2. Hermetic Seals for Chemical/Biological Protective Garments

    SBC: CREARE LLC            Topic: CBD13109

    Interfaces on existing military chemical/biological protection garments are not designed to fully eliminate macroscopic and microscopic air gaps at folds, fabric surfaces, or hook-and-loop closures, and thus do not provide a hermetic barrier against exposure. Creare proposes to develop a hermetic garment closure system that seals macroscopic and microscopic gaps at interfaces and closures and pro ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  3. Transformational GaN Substrate Technology

    SBC: KYMA TECHNOLOGIES, INC.            Topic: DEFOA0000941

    Kyma Technologies will develop a cost-effective technique to grow high-quality gallium nitride (GaN) by developing a high growth rate process for creating crystalline GaN boules, which are used as a starting material for semiconductor device manufacturing. Currently, growing boules from GaN seeds is slow, expensive, and inconsistent, which negatively affects manufacturing yield and electronic devi ...

    SBIR Phase II 2014 Department of EnergyARPA-E
  4. Continuous Casting of Metallic Nuclear Fuel Pins

    SBC: CREARE LLC            Topic: 19b

    Economical production methods for metal nuclear fuel are needed to support the development of safe and environmentally friendly nuclear power plants. This SBIR project aims to develop advanced technology for low-cost production of nuclear fuel from uranium alloy.

    SBIR Phase II 2014 Department of Energy
  5. A Miniature Autoinjector for Multicomponent Drugs and Vaccines

    SBC: CREARE LLC            Topic: CBD13106

    Chemical, biological, or toxin attacks in military and civilian settings are a serious and growing concern. Standard first aid for exposure to some chemical warfare agents and toxins includes the immediate administration of relevant antidotes using an autoinjector. When an attack occurs, pre-filled autoinjectors must be immediately available and thus highly portable, and they must be suitable fo ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  6. FLAAT Growth Technology for Low Cost Thick High Quality GaN on Thin 8 Sapphir

    SBC: KYMA TECHNOLOGIES, INC.            Topic: 11b

    The use of non-native substrates for GaN- based devices leads to devices with high densities of defects stemming from misfit dislocation formation due to lattice mismatch and large values of wafer bow stemming from thermal mismatch. The latter is particularly problematic as one attempts to grow device films on large area substrates. The high defect densities give rise to degraded performance and r ...

    SBIR Phase II 2014 Department of Energy
  7. Multiscale Hydrogeologic-Biogeochemical Process Monitoring and Prediction Framework

    SBC: Subsurface Insights            Topic: 20a

    Remediation and long term management of contaminated sites is likely to require hundreds of billions of dollars. Most of the sites which remain in the US inventory of contaminated sites do not have simple solutions, and effective remediation of these sites will require a fundamental, timely and actionable understanding of physical, chemical and biological processes and overall system behavior in c ...

    SBIR Phase II 2014 Department of Energy
  8. ENZYMES IMMOBILIZED ON GOLD SURFACES

    SBC: Escagenetics Corp.            Topic: N/A

    THE OBJECTIVE OF THIS PROJECT IS TO DEVELOP A NEW CLASS OF BIOSENSORS BASED ON THE USE OF COLLOIDAL GOLD DIRECTLY OR DEPOSITED AS A POROUS GOLD FILM. THE KEY TO THE APPROACH ISTHE IMMOBILIZATION OF ENZYMES ON GOLD SURFACES THAT PROVIDE FOR HIGHFLUX, HETEROGENEOUS ELECTRON TRANSFER. THE FEASIBILITY OF CONSTRUCTING THIS NEW CLASS OF BIOSENSORS WILL BE EVALUATED BY THE END OF PHASE I. THE OBJECTIVES ...

    SBIR Phase II 1987 Department of Energy
  9. A CLEAN HELIUM COMPRESSOR/EXPANDER FOR LONG LIFE CRYOGENIC SERVICE

    SBC: CREARE LLC            Topic: N/A

    CRYOGENIC HELIUM REFRIGERATORS AND LIQUIFIERS CONVENTIONALLYEMPLOY OIL LUBRICATED POSITIVE DISPLACEMENT COMPRESSORS AT THE WARM END AND FREQUENTLY USE PISTON TYPE EXPANSION ENGINES AT THE COLD END. THESE SYSTEMS REQUIRE EXTENSIVE AND VIGILANT MAINTENANCE TO CONTROL CONTAMINATION FROM LUBRICATING OIL AND ITS VOLATILE COMPONENTS MIGRATING TO THE COLD END. HENCE THE NEED FOR LOW MAINTENANCE COMPRESSO ...

    SBIR Phase II 1987 Department of Energy
  10. ALL-METAL, DEMOUNTABLE CRYOGENIC SEAL

    SBC: CREARE LLC            Topic: N/A

    IN MOST CRYOGENIC SYSTEMS, THE PIPING JOINTS IN COLD REGIONSOF THE SYSTEM ARE MADE BY WELDING OR SOLDERING. THIS IS ESSENTIAL BECAUSE EXISTING DESIGNS OF CRYOGENIC PIPE SEALS CANNOT BE RELIED ON NOT TO LEAK. ANY SUCH LEAKS INTO THE COLD BOX REDUCE THE EFFECTIVENESS OF THE INSULATION, THEREBY REDUCING THE EFFICIENCY OF THE REFRIGERATOR. WELDEDJOINTS MAKE REPLACEMENT OF COMPONENTS DIFFICULT AND HAVE ...

    SBIR Phase II 1987 Department of Energy
US Flag An Official Website of the United States Government