Award Data

THE OBJECTIVE OF THIS PROPOSAL IS TO CONDUCT PRELIMINARY TESTS ON A NOVEL CHEMISTRY WHICH COULD RESULT IN THE PRODUCTION OF A LOW COST WAFER WHICH CHANGES COLOR UPON EXPOSURE TO WARFARE GASES (WG). SIMILAR WAFERS WHICH WE DEVELOPED FOR OTHER GASES ARE ABOUT 2" X 1" X 1/16" AND WEIGH ABOUT 2.3 GM. THESE CHROMOSENSE (TM) WAFERS CAN DETECT HYDROGEN SULFIDE, ETC. IN 10-30 SEC. AT CONCENTRATIONS OF THE ...

N/A

N/A

N/A

ABSTRACT: CubeSats provide a new, low-cost platform for space weather missions. They enable new mission paradigms, such as the ability to perform multiple measurements of the same physical phenomena globally from several satellites, in contrast to high-accuracy measurements of multiple phenomena on the same spacecraft. Flight-tested neutral wind sensors must be miniaturized to fit into these mu ...

ABSTRACT:Emergence and feasibility for flexible body-worn electronics and particularly medical patches requires high performance electronics capability.The problem is that these new technologies must have flexible and conformal physical formats and conventional electronic components are not in any way flexible. In the CLAS Phase I program, a new flexible high-performance manufacturing and material ...

ABSTRACT: Dual-mode scramjet engines must operate over a wide range of flight Mach numbers. Closed-loop engine control is necessary to maintain thrust and flame stability while preventing unstart over the large flight envelope. High-frequency sensors and actuators will be a key component of future scramjet Full Authority Digital Engine Controllers (FADECs) due to the short time scales associate ...

ABSTRACT: Hybrid technologies and adaptive resource management can significantly enhance the capability and range of next-generation aircraft. To implement this strategy, we propose to develop a control system to configure the Adaptive Power and Thermal Management System (APTMS) based on the subsequent flight profile to enable the APTMS to use the most appropriate cooling system(s), heat sink(s) ...

Chemical, biological, or toxin attacks in military and civilian settings are a serious and growing concern. Standard first aid for exposure to some chemical warfare agents and toxins includes the immediate administration of relevant antidotes using an autoinjector. When an attack occurs, pre-filled autoinjectors must be immediately available and thus highly portable, and they must be suitable fo ...

Interfaces on existing military chemical/biological protection garments are not designed to fully eliminate macroscopic and microscopic air gaps at folds, fabric surfaces, or hook-and-loop closures, and thus do not provide a hermetic barrier against exposure. Creare proposes to develop a hermetic garment closure system that seals macroscopic and microscopic gaps at interfaces and closures and pro ...