You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Hermetic Seals for Chemical/Biological Protective Garments

    SBC: CREARE LLC            Topic: CBD13109

    Interfaces on existing military chemical/biological protection garments are not designed to fully eliminate macroscopic and microscopic air gaps at folds, fabric surfaces, or hook-and-loop closures, and thus do not provide a hermetic barrier against exposure. Creare proposes to develop a hermetic garment closure system that seals macroscopic and microscopic gaps at interfaces and closures and pro ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  2. SiC Based Electrical Distribution for High Voltage Vehicle Power Systems

    SBC: CREARE LLC            Topic: A12118

    Power system upgrades for next generation ground combat vehicles require technology advances such as higher operating temperature, greater power density, and increased functionality. Silicon Carbide (SiC) based power electronic devices offer advantages over silicon devices, especially for high voltage buses, and Creare is currently developing a SiC based 12 channel, +/ 300 VDC Solid State Electric ...

    SBIR Phase II 2014 Department of DefenseArmy
  3. A Miniature Autoinjector for Multicomponent Drugs and Vaccines

    SBC: CREARE LLC            Topic: CBD13106

    Chemical, biological, or toxin attacks in military and civilian settings are a serious and growing concern. Standard first aid for exposure to some chemical warfare agents and toxins includes the immediate administration of relevant antidotes using an autoinjector. When an attack occurs, pre-filled autoinjectors must be immediately available and thus highly portable, and they must be suitable fo ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  4. High-Temperature Hybrid Foil Bearing for Unmanned Aerial System Gas Turbines

    SBC: CREARE LLC            Topic: A12104

    Small unmanned aerial systems (UAS) are a critical element in current military operations, and their use will increase substantially in the future. The propulsion system is a key design constraint in any UAS, and current small gas turbines for these vehicles are limited by the conventional oil-lubricated rolling element bearings used to suspend their high-speed rotating assemblies. Gas-lubricated ...

    SBIR Phase II 2014 Department of DefenseArmy
  5. Physics-Based, High Resolution Soil Strength Prediction

    SBC: CREARE LLC            Topic: A12094

    Effective Army-scale mobility predictions in austere environments require knowledge of soil strength conditions at high spatial resolution (100 m or less). Knowledge of the battlespace is greatly hindered because available weather-scale near-surface soil moisture data, a primary indicator of soil strength, is limited by its coarse spatial resolution (125 km). Moreover, there are no adequate method ...

    SBIR Phase II 2014 Department of DefenseArmy
  6. Nondestructive Concrete Characterization System

    SBC: NLA DIAGNOSTICS LLC            Topic: A12aT013

    During covert operations, the U.S. Army may be required to breach a concrete structure using a controlled explosion. When choosing the most effective charge size and placement, it is vital to perform a rapid field assessment of the material and structural properties of the target structure. However, high strength concrete materials (such as Ultra-High Performance Concrete), including steel fiber r ...

    STTR Phase II 2014 Department of DefenseArmy
  7. Functional Hearing Evaluation for Military Occupational Specialties

    SBC: CREARE LLC            Topic: OSD08H17

    Mission readiness in the military depends on a soldier’s ability to perform a particular job or task safely and efficiently. Some military specialties require the soldier to perform hearing-critical tasks that may take place in noisy and distracting environments. Further, communication requirements vary widely across Military Occupational Specialties (MOS). However, the hearing ability of vir ...

    SBIR Phase II 2009 Department of DefenseArmy
  8. Wideband Filter Networks for Joint Tactical Radio System (JTRS) Size, Weight, and Power (SWAP) Reduction

    SBC: Active Spectrum, Inc.            Topic: A07086

    The objective of this proposal is to demonstrate the feasibility of mass producing robust miniaturized, tunable narrowband preselect filters in the 500-2000 MHz bands for fielded JTRS platforms. In the 500 MHz – 2000 MHz frequency bands, we proposed a tunable 2-pole narrowband (30 MHz) preselect filter. Active Spectrum, Inc.’s filters represent a proven, significant improvement over the state ...

    SBIR Phase II 2009 Department of DefenseArmy
  9. A Multiscale Software Tool for Field/Circuit Simulation

    SBC: WAVE COMPUTATION TECHNOLOGIES INC            Topic: A08T004

    Wave Computation Technologies, Inc. (WCT) proposes to develop a new multiscale solver for electromagnetic field/circuit co-simulation. This solver combines three efficient electromagnetic field algorithms, (a) the spectral element time-domain (SETD) metho

    STTR Phase II 2009 Department of DefenseArmy
  10. Multi-Fuel Burner for Stirling Applications

    SBC: CREARE LLC            Topic: A07097

    Compact, efficient, and sustainable electric power generators are needed to provide mobile electric power for deployable military bases. Stirling engines are attractive candidates to meet the Army’s future deployed electric power needs because they are quiet, efficient, and have the potential to be highly fuel-flexible due to the external combustion process used to drive the engine. For low-po ...

    SBIR Phase II 2009 Department of DefenseArmy
US Flag An Official Website of the United States Government