You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Hermetic Seals for Chemical/Biological Protective Garments

    SBC: CREARE LLC            Topic: CBD13109

    Interfaces on existing military chemical/biological protection garments are not designed to fully eliminate macroscopic and microscopic air gaps at folds, fabric surfaces, or hook-and-loop closures, and thus do not provide a hermetic barrier against exposure. Creare proposes to develop a hermetic garment closure system that seals macroscopic and microscopic gaps at interfaces and closures and pro ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  2. Regenerable, heat-Abating, humidity-Neutralizing, Carbon diOxide Removal System (RANCOR) Phase II

    SBC: PARAGON SPACE DEVELOPMENT CORPORATION            Topic: CBD12106

    In Phase I RANCOR successfully demonstrated an innovative enabling humidity control technology to provide very low humidity air to water sensitive, fully reusable CO2 adsorbents. The use of adsorbents enables complete reusability/rechargability and reduces the total heat load on the SCBA to the point where ice or other cooling systems will no longer be required. In Phase II Paragon will introduce ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  3. HCI and C2 for Autonomous Air Evacuation of Casualties

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: A12111

    As a company that focuses on fixed-based and man-packable Unmanned Aerial Systems (UAS) Ground Control Stations (GCSs), Kutta has been privileged to work with the U.S. Government and Prime Contractors on shaping the future of the unmanned resupply capability. Kutta leverages this knowledge and its experience with multiple unmanned Vertical Take-Off and Landing (VTOL) resupply programs and UASs to ...

    SBIR Phase II 2014 Department of DefenseArmy
  4. SiC Based Electrical Distribution for High Voltage Vehicle Power Systems

    SBC: CREARE LLC            Topic: A12118

    Power system upgrades for next generation ground combat vehicles require technology advances such as higher operating temperature, greater power density, and increased functionality. Silicon Carbide (SiC) based power electronic devices offer advantages over silicon devices, especially for high voltage buses, and Creare is currently developing a SiC based 12 channel, +/ 300 VDC Solid State Electric ...

    SBIR Phase II 2014 Department of DefenseArmy
  5. A Miniature Autoinjector for Multicomponent Drugs and Vaccines

    SBC: CREARE LLC            Topic: CBD13106

    Chemical, biological, or toxin attacks in military and civilian settings are a serious and growing concern. Standard first aid for exposure to some chemical warfare agents and toxins includes the immediate administration of relevant antidotes using an autoinjector. When an attack occurs, pre-filled autoinjectors must be immediately available and thus highly portable, and they must be suitable fo ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  6. High-Temperature Hybrid Foil Bearing for Unmanned Aerial System Gas Turbines

    SBC: CREARE LLC            Topic: A12104

    Small unmanned aerial systems (UAS) are a critical element in current military operations, and their use will increase substantially in the future. The propulsion system is a key design constraint in any UAS, and current small gas turbines for these vehicles are limited by the conventional oil-lubricated rolling element bearings used to suspend their high-speed rotating assemblies. Gas-lubricated ...

    SBIR Phase II 2014 Department of DefenseArmy
  7. Physics-Based, High Resolution Soil Strength Prediction

    SBC: CREARE LLC            Topic: A12094

    Effective Army-scale mobility predictions in austere environments require knowledge of soil strength conditions at high spatial resolution (100 m or less). Knowledge of the battlespace is greatly hindered because available weather-scale near-surface soil moisture data, a primary indicator of soil strength, is limited by its coarse spatial resolution (125 km). Moreover, there are no adequate method ...

    SBIR Phase II 2014 Department of DefenseArmy
  8. Nondestructive Concrete Characterization System

    SBC: NLA DIAGNOSTICS LLC            Topic: A12aT013

    During covert operations, the U.S. Army may be required to breach a concrete structure using a controlled explosion. When choosing the most effective charge size and placement, it is vital to perform a rapid field assessment of the material and structural properties of the target structure. However, high strength concrete materials (such as Ultra-High Performance Concrete), including steel fiber r ...

    STTR Phase II 2014 Department of DefenseArmy
US Flag An Official Website of the United States Government