You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Active Quiet Pillow

    SBC: SMD Corporation            Topic: A12110

    Phase II of this project will focus on developing, constructing and demonstrating the operation of an prototype Active Quiet Pillow for reducing interior noise in helicopter medical evacuation scenarios. The innovation is based on a strategic combination of active noise reduction (ANR) and passive treatment elements in a pillow style arrangement. Two performance objectives to be demonstrated inclu ...

    SBIR Phase II 2014 Department of DefenseArmy
  2. A DIGITAL SYSTEM APPROACH FOR REALTIME HF EMITTER IDENTIFICATION

    SBC: Scope Inc.            Topic: N/A

    SCOPE PROPOSES TO DEVELOP A DIGITAL SIGNAL PROCESSING CONCEPT FOR THE REALTIME DETECTION AND IDENTIFICATION OF HF EMITTERS AND THEIR PLATFORMS. THIS INVESTIGATION WILL SPECIFICALLY EVALUATE HF EMITTER CHARACTERISTICS AND PHENOMENA OF POTENTIAL INTEREST FOR IDENTIFICATION. SIGNAL PROCESSING TECHNIQUES AND ALGORITHMS WILL BE DEFINED TO EXPLOIT EMITTER AND PLATFORM IDENTIFIABLE SIGNAL CHARACTERISTICS ...

    SBIR Phase II 1987 Department of DefenseArmy
  3. A Low-Cost, High-Performance Colloidal Quantum Dot LWIR FPA for Hyperspectral Imaging

    SBC: SIVANANTHAN LABORATORIES, INC.            Topic: CBD13105

    The primary goal of this proposed work is to develop a long wavelength infrared (LWIR) colloidal quantum dot (CQD)-based focal plane array (FPA) and show its feasibility when used in a camera system and a hyperspectral imaging system. Phase I results cumulated in the first-ever synthesis of photoresponsive LWIR CQDs and CQD-based photodetectors at the single device level operating at room temperat ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  4. A Miniature Autoinjector for Multicomponent Drugs and Vaccines

    SBC: CREARE LLC            Topic: CBD13106

    Chemical, biological, or toxin attacks in military and civilian settings are a serious and growing concern. Standard first aid for exposure to some chemical warfare agents and toxins includes the immediate administration of relevant antidotes using an autoinjector. When an attack occurs, pre-filled autoinjectors must be immediately available and thus highly portable, and they must be suitable fo ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  5. Bio-Inspired Semiconductor Technology

    SBC: EWA Government Systems, Inc.            Topic: A12106

    The U.S. military is dependent on electronics for situational awareness. Power consumption of electronics must be minimal for practical deployment. Much of the incoming video, acoustic, and sensory data is insignificant and does not need to be analyzed by computationally intensive algorithms operating on conventional processors. This project aims to develop an ultra-low-power parallel processor ca ...

    SBIR Phase II 2014 Department of DefenseArmy
  6. Chemical Analyzer System for In Situ and Real Time Surface Monitoring for Composition Control During Synthesis of Compound Semiconductor Films

    SBC: Staib Instruments, Inc.            Topic: A13AT011

    The area of thin film growth has progressed rapidly, producing many high performance new materials which require accuracy of their atomic composition to perform as expected. Any method to provide real time in situ information about the elemental composition of the growing surface is highly valuable for these new, complicated materials. Utilizing a new instrument design, the Phase I project team ...

    STTR Phase II 2014 Department of DefenseArmy
  7. Design Automation Software for Biomimetic Surface Presentation with DNA Origami

    SBC: PARABON NANOLABS, INC.            Topic: CBD12103

    A development program is proposed for a design automation software package that enables the generation of complex surfaces, with user defined or automated definition of point charge and hydrophobic/hydrophilic properties, using DNA origami as a presentation substrate. Building upon Parabons existing software for DNA origami design, this project will result in software that can be used to design a ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  8. Encapsulation Technology for Increased Environmental Stability of Vertebrate Cells

    SBC: Luna Innovations Incorporated            Topic: A12090

    Luna Innovations is developing stabilization technology for increased long-term storage of various biological moieties (e.g. enzymes, nucleic acids, and whole cells). This unique stabilization matrix allows for extended cell viability lifetime, minimizing cell maintenancerequirements while retaining physiological activity. The proposed encapsulated cell technology has been shown to provide signifi ...

    SBIR Phase II 2014 Department of DefenseArmy
  9. Hermetic Seals for Chemical/Biological Protective Garments

    SBC: CREARE LLC            Topic: CBD13109

    Interfaces on existing military chemical/biological protection garments are not designed to fully eliminate macroscopic and microscopic air gaps at folds, fabric surfaces, or hook-and-loop closures, and thus do not provide a hermetic barrier against exposure. Creare proposes to develop a hermetic garment closure system that seals macroscopic and microscopic gaps at interfaces and closures and pro ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  10. High-Temperature Hybrid Foil Bearing for Unmanned Aerial System Gas Turbines

    SBC: CREARE LLC            Topic: A12104

    Small unmanned aerial systems (UAS) are a critical element in current military operations, and their use will increase substantially in the future. The propulsion system is a key design constraint in any UAS, and current small gas turbines for these vehicles are limited by the conventional oil-lubricated rolling element bearings used to suspend their high-speed rotating assemblies. Gas-lubricated ...

    SBIR Phase II 2014 Department of DefenseArmy
US Flag An Official Website of the United States Government