You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Hermetic Seals for Chemical/Biological Protective Garments

    SBC: CREARE LLC            Topic: CBD13109

    Interfaces on existing military chemical/biological protection garments are not designed to fully eliminate macroscopic and microscopic air gaps at folds, fabric surfaces, or hook-and-loop closures, and thus do not provide a hermetic barrier against exposure. Creare proposes to develop a hermetic garment closure system that seals macroscopic and microscopic gaps at interfaces and closures and pro ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  2. A Low-Cost, High-Performance Colloidal Quantum Dot LWIR FPA for Hyperspectral Imaging

    SBC: SIVANANTHAN LABORATORIES, INC.            Topic: CBD13105

    The primary goal of this proposed work is to develop a long wavelength infrared (LWIR) colloidal quantum dot (CQD)-based focal plane array (FPA) and show its feasibility when used in a camera system and a hyperspectral imaging system. Phase I results cumulated in the first-ever synthesis of photoresponsive LWIR CQDs and CQD-based photodetectors at the single device level operating at room temperat ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  3. Reactive Structural Materials for Enhanced Blasts

    SBC: ASPEN MEDISYS, LLC            Topic: DTRA122008

    MATSYS proposes to develop reactive materials compositions and processing techniques for structural reactive composites for blast enhancement. This effort will combine our unique expertise in instrumented-Hot Isostatic Pressing (HIP) with new approaches in reactive materials design to develop a new generation of cost-efficient and highly reactive materials. The proposed material system will use a ...

    SBIR Phase II 2014 Department of DefenseDefense Threat Reduction Agency
  4. Design Automation Software for Biomimetic Surface Presentation with DNA Origami

    SBC: PARABON NANOLABS, INC.            Topic: CBD12103

    A development program is proposed for a design automation software package that enables the generation of complex surfaces, with user defined or automated definition of point charge and hydrophobic/hydrophilic properties, using DNA origami as a presentation substrate. Building upon Parabons existing software for DNA origami design, this project will result in software that can be used to design a ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  5. Thick Composite Crack Analysis

    SBC: TECHNICAL DATA ANALYSIS, INC.            Topic: N132101

    Composite materials have emerged as the materials of choice for increasing the performance and reducing the weight and cost of military aircraft. Nevertheless, reliable prediction of composites behavior in both static and cyclic load situations are far from complete, due to limitations of current analysis methods and to uncertainty and statistical variation of composite behavior under a given set ...

    SBIR Phase II 2014 Department of DefenseNavy
  6. Flying Insect Sampling Device (FISDe)

    SBC: McQ Inc.            Topic: DHP12007

    The Army Defense Health Program has a need for a novel freestanding device to sample and collect a broad spectrum of flying insects (order Diptera) for the purpose of analyzing possible disease vectors. The sampling device is required to be effective against mosquitoes (Anopheles, Aedes, and Culex) and sand flies (Phlebotomus and Lutzomyai) in particular, and with desired applicability to other sp ...

    SBIR Phase II 2014 Department of DefenseDefense Health Agency
  7. Non-Mechanically Steered 3D Imaging LADAR

    SBC: FIBERTEK, INC.            Topic: AF131129

    ABSTRACT: In this SBIR Phase 2 proposal, Fibertek proposes to develop a laboratory breadboard prototype of a 1.5-um 3D-Imaging Ladar system, based on the use of high-speed liquid-crystal (i.e. non-mechanical) beam steering technology. The proposed 3D ladar system is capable of 10s of Hz frame-rate for a mosaic-tiled ladar system, providing near-diffraction limited performance over a FOV of up to ...

    SBIR Phase II 2014 Department of DefenseAir Force
  8. Development of an Advanced Bearing for Extreme Service Environments

    SBC: CREARE LLC            Topic: N132103

    Aircraft carriers are the backbone of the U.S. Navys fleet, which operates around the globe, with the sole purpose of launching and recovering aircraft to support U.S. military and peacekeeping missions. The ability to quickly and safely launch aircraft can become a key limitation for an aircraft carrier when trying to deliver the maximum amount of warfighter capability. Currently, the wheel beari ...

    SBIR Phase II 2014 Department of DefenseNavy
  9. PATTRN: Predicting, Analyzing and Tracking Training Readiness and Needs

    SBC: Lumir Research Institute, Inc.            Topic: AF131026

    ABSTRACT: Lumir is developing the Predicting, Analyzing, and Tracking Training Readiness and Needs (PATTRN) system, a comprehensive multi-format capable data collection, processing, tagging, and storage system which enables users to predict the most effective future training situation(s) for a trainee based on their past performance and their current and future proficiency profile. PATTRN will b ...

    SBIR Phase II 2014 Department of DefenseAir Force
  10. High Performance Nanopillar Optical Antenna Avalanche Detector Operating at 1.06um

    SBC: Illinois Applied Research Associates LLC            Topic: MDA12014

    In this Phase II SBIR program, Illinois Applied Research Associates will design, manufacture, and test a 1.06 um optimized Linear Mode (LM) avalanche photodiode (APD) array. The array will be electrically and optically characterized and will be tested for environmental and application constraints for integration into terrestrial and space based applications. The ability to operate in linear mode ...

    SBIR Phase II 2014 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government