You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Accurate Insensitive Munitions Modeling Tool Coupling Detailed Chemical Kinetics and Physical Models

    SBC: CFD Research Corporation            Topic: MDA06041

    Understanding the response of solid rocket motors under cook-off conditions is important to the safety of the military’s weapon arsenal. In this SBIR, CFDRC, teamed with Merrill Beckstead of Brigham Young University (BYU) and ATK Launch Systems, proposes to develop a software toolkit for simulating the response of solid rocket motors (SRM) to fast cook-off events. The complete software package w ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  2. A CLEAN HELIUM COMPRESSOR/EXPANDER FOR LONG LIFE CRYOGENIC SERVICE

    SBC: CREARE LLC            Topic: N/A

    CRYOGENIC HELIUM REFRIGERATORS AND LIQUIFIERS CONVENTIONALLYEMPLOY OIL LUBRICATED POSITIVE DISPLACEMENT COMPRESSORS AT THE WARM END AND FREQUENTLY USE PISTON TYPE EXPANSION ENGINES AT THE COLD END. THESE SYSTEMS REQUIRE EXTENSIVE AND VIGILANT MAINTENANCE TO CONTROL CONTAMINATION FROM LUBRICATING OIL AND ITS VOLATILE COMPONENTS MIGRATING TO THE COLD END. HENCE THE NEED FOR LOW MAINTENANCE COMPRESSO ...

    SBIR Phase II 1987 Department of Energy
  3. A Compact Swaging Machine for Aircraft Carrier Purchase Cable Terminals

    SBC: CREARE LLC            Topic: N06T023

    For the U.S. Navy, Creare is developing a Compact Swaging Machine (CSM) to attach arresting gear Purchase Cable terminals on ship. Our CSM utilizes three innovative features to dramatically reduce the size and weight of the swaging machine to make it usable in a shipboard environment: (1) a high pressure hydraulic system which minimizes the actuator size, (2) an efficient swaging schedule which re ...

    STTR Phase II 2011 Department of DefenseNavy
  4. A Cryogenic Grinding System for the High Productivity Grinding of Advanced Materials

    SBC: CREARE LLC            Topic: DLA09001

    High performance metals, ceramics, and hard coatings are used in military applications to enhance the performance of key systems needed by the warfighter. One of the most prevalent operations to remove material, achieve the desired surface finish, or enhance part quality is bulk and finish grinding. For typical cutting speeds, conventional synthetic or oil-based coolants are sufficient to remove ...

    SBIR Phase II 2011 Department of DefenseDefense Logistics Agency
  5. ACTIVELY CONTROLLED GAS BEARINGS

    SBC: Burton Technologies Inc            Topic: N/A

    RESEARCH AND DEVELOPMENT WILL BE CARRIED OUT TO PROVIDE PROTOTYPE, ACTIVELY CONTROLLED GAS BEARINGS FOR PRECISION MOVEMENT IN INSTRUMENTS AND MACHINE TOOLS. THIS WILL DRAW UPON PRELIMINARY WORK ON (1) FABRICATION, (2) DYNAMIC ANALYSIS OF THE BEARING AND SUPPORTED MASS, (3) PIEZOELECTRIC VALVING AND PIEZOELECTRIC DISPLACEMENT OF THE BEARING SURFACE, AND (4) THE ADAPTATION OF A MICROPROCESSOR TO SER ...

    SBIR Phase II 1987 National Science Foundation
  6. ADAPTING EXISTING CURRICULA FOR PROMOTING SOCIAL AND ADAPTIVE FUNCTIONING IN INDI

    SBC: 3-C Institute for Social Development, Inc.            Topic: N/A

    Children with high-functioning autism spectrum disorders (HFX-ASD) are at heightened risk for a wide range of social relationship problems. Specialists in the field of autism suggest the social skill deficits experienced by people with HFX-ASD are the most difficult aspect of the disorder to overcome. This Phase II project will continue the research and development (RandD) of an innovative social ...

    SBIR Phase II 2008 Department of Health and Human ServicesNational Institutes of Health
  7. A Device to Monitor Toe Walking in Children with Cerebral Palsy

    SBC: Simbex LLC            Topic: N/A

    DESCRIPTION (provided by applicant): This goal of this SBIR project is to quantify and validate the feasibility and potential for a non- obtrusive, wearable, in-shoe gait-monitoring device for children with Cerebral Palsy (CP). It is hypothesized that continuous monitoring and analysis of simple gait parameters in children with CP outside the clinical laboratory and during normal daily activities ...

    SBIR Phase II 2008 Department of Health and Human ServicesNational Institutes of Health
  8. Adolescent Real World Simulation e-Learning Program

    SBC: INDEPENDENT LIVING RESOURCES, INC.            Topic: NIMHD

    DESCRIPTION (provided by applicant): The purpose of the proposed project is to develop, implement, and evaluate the use of an Internet-based eLearning multimedia program that will allow foster care social workers, educators, and other youth workers to planone-day real world simulations that would allow adolescent foster youths, ages 13-21, to learn and practice independent living skills. Research ...

    SBIR Phase II 2011 Department of Health and Human ServicesNational Institutes of Health
  9. Advanced Analog Micro-lens Technology

    SBC: GRASSMERE DYNAMICS            Topic: AF071003

    To better quantify the benefits from the advanced microlens technology developed in the Phase I we plan to have microlenses installed in three astronomical telescopes. In Phase II we are planning to complete the fabrication of the remaining 4 microlenses needed for Gemini telescope and ,also fabricate microlenses for SOR telescopes in New Mexico (NGAS)and Hawaii. This will provide a direct evalua ...

    SBIR Phase II 2008 Department of DefenseAir Force
  10. Advanced Epoxy System for Large Scale Composite Ship Component Manufacturing Using the VARTM Process.

    SBC: TRIANGLE POLYMER TECHNOLOGIES, INC.            Topic: N06T040

    A major limitation of current high performance composites made from vinyl ester resins is their performance with carbon fiber reinforcements. Carbon fiber composites can possess much higher specific stiffness and strength than glass fiber composites, but the laminated composite properties depend on a good interface between the matrix resin and the fiber. Since vinyl ester resins typically do not e ...

    STTR Phase II 2008 Department of DefenseNavy
US Flag An Official Website of the United States Government