Award Data

Insuring the safety and control of littoral waters is problematic because of the difficulties of surveillance. The preferred methods of surveillance in the ocean are acoustic. In littoral waters, acoustic methods fail because noise from the surf and reflections from the shallow bottom convolute acoustic signatures beyond our capacity to discern them. Water absorbs light, reducing the effectiven ...

The development of a generalized moving body capability for Computational Fluid Dynamics (CFD) flow simulations of highly transient flowfields is critical to system analyses of Divert and Attitude Control Systems (DACS) for Kinetic Warheads (KWs). Testing capabilities are limited in the DACS operating regime; therefore, computational tools are essential for such analyses. The flow in the DACS its ...

In phase I, Dot Metrics Technologies demonstrated the feasibility of a new method of introducing deep-green luminescent nanostructure into semiconductor materials for light-emitting device applications. The materials were used to fabricate and characterize preliminary optoelectronic device test structures. In phase II, Dot Metrics Technologies proposes to leverage these new materials and methods i ...

Power generation, power distribution and electric propulsion on ships and aerospace vehicles could be made smaller, lighter, more efficient, more versatile, and lower maintenance by operating these systems—partly or entirely—at cryogenic temperatures. Our goal is to demonstrate the advantages of cryogenic operation in regard to electronic components, specifically semiconductor devices (power d ...

Ultra-high performance multi-function RF electronics are required by the United States Department of Defense to enable next generation radar and sensor networks in response to an increasingly diverse array of threats to our military and our homeland. An elegant potential solution is that of gallium nitride (GaN) RF electronics, which has shown great promise on currently available yet foreign subs ...

The projected cost for the Mentis Sciences, Inc., (MSI) prototype PAC3 radome is 1/6th of the total cost of the present system. A Pareto analysis of the current MSI process indicates that the two largest costs in radome production are the direct labor associated with fabrication and the cost of the raw materials. In Phase I MSI demonstrated that COTS paint spraying technology reduced the direct ...

We investigate the development of a secure fuselet runtime environment built on a foundation of aspect-oriented web services. Aspect-oriented techniques enable the modularization of crosscutting concerns such as remote access, security, and monitoring using code instrumentation. We compose aspect-oriented instrumentation with web service technologies in a noninvasive and orthogonal manner, and lev ...

THE PROPOSED PROJECT WILL DEVELOP MATERIALS AND SUPPORTING THERMAL TECHNOLOGY LEADING TO DESIGN OF HIGH POWER PULSE CONDUCTORS FOR SPACE APPLICATIONS. IN PHSE I WE WILL EVALUATE AN EM GUN SYSTEM, IDENTIFY ALTERNATIVE MATERIALS AND THERMAL APPROACHES FOR SELECTED COMPONENTS, AND IDENTIFY TECHNOLOGY REQUIREMENTS. COMPONENT DEVELOPMENT FEASIBILITY AND BENEFITS WILL BE DEFINED.

THE NEED FOR INCREASING THE SENSITIVITY OF SPACE-BORNE SENSORS WILL REQUIRE DEVELOPMENT OF LONG-LIFE, HIGHLY EFFICIENT HELIUM LIQUIFIERS. CONVENTIONAL HELIUM LIQUIFIERS EMPLOY A JOULE-THOMSON EXPANSION VALVE TO EXPAND THE HELIUM AT TEMPERATURES BELOW ABOUT 10 DEG K. IT HAS BEEN SHOWN THAT GAINS OF UP TO 30% IN OVERALL CYCLE EFFICIENCY CAN BE OBTAINED IF THE JOULE-THOMSON VALVE IS REPLACED BY AN EX ...

Advanced space-borne infrared detectors require cooling at temperatures near 10 K. Cooling loads for these detectors will range from 0.25 W to 1.0 W at 10 K, with additional loads at higher temperatures. A multistage cooler, capable of cooling multiple loads, will offer large potential gains in system efficiency and weight. Turbomachine-based Brayton cryocoolers are ideal candidates for these m ...