You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Novel Approaches to Fabricate High Flux Density Magnetic Materials

    SBC: Advanced Materials Corp            Topic: N04158

    Advanced Materials Corporation proposes to optimize the process to manufacture soft magnetic materials that are anticipated to be superior to M19 steels both in magnetic induction and in electrical resistivity. Proof-of-concept studies conducted during Phase I have demonstrated the superior magnetic properties of the new material in comparison to M19 steel. Further optimization studies are propose ...

    SBIR Phase II 2005 Department of DefenseNavy
  2. Analysis Tools for Detection and Diagnosis of Biological Threats

    SBC: ALPHA-GAMMA TECHNOLOGIES, INC.            Topic: CBD04113

    DNA microarray technology, in combination with statistical and predictive modeling tools, could be used to evaluate thousands of genes against distinct gene expression patterns induced by chemical/biological agents to provide early identification and speed therapeutic intervention. The overall objective of this Phase II effort is to leverage existing public domain resources and commercial tools t ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  3. Damping Coatings for Gas Turbine Compression System Airfoils

    SBC: APS Materials, Inc.            Topic: N04019

    The use of monolithic airfoil structures in static and rotating components such as one-piece integrally bladed rotors (IBR's) in military turbine engines has created an increased risk of high cycle fatigue (HCF). The Phase I SBIR studies recently demonstrated plasma sprayed hard coating concepts that show significantly greater damping than has been observed in previous investigations. Polymer-impr ...

    SBIR Phase II 2005 Department of DefenseNavy
  4. Novel THz-frequency spectrometers by integrating widely-tunable monochromatic THz sources and detectors, or arrays of emitters and detectors, with pho

    SBC: ArkLight            Topic: CBD04104

    By continuing teaming up with one of the most reputable university teams in THz science and technology, ArkLight proposes to carry out the tasks set for a Phase-II program following our success in Phase I. We are aimed at the further development of novel spectrometers to analyze chemicals in the vapor phase based on accurate measurements of the emission and absorption spectra due to the molecular ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  5. Halo-hydrocarbon Growth of Bulk SiC

    SBC: BRIGHTOUTCOME INC.            Topic: N04T030

    We propose to use a gas fed vertical style sublimation reactor that can accommodate several different types of chemistries and be modified to a number of different approaches. The reactor is similar to the HTCVD reactor developed by Linköping University and Okmetic. The approach will be to initially try out different chemistries at fairly high temperatures where sublimation is a dominant process. ...

    STTR Phase II 2005 Department of DefenseNavy
  6. Development of large bulk Silicon Carbide substrates from halogenated precursors

    SBC: BRIGHTOUTCOME INC.            Topic: N04177

    The development of long SiC boules grown from the gas-phase using chlorinated halo-hydrocarbons faces enormous technical hurdles that must be overcome. The hurdles of specific interest are the outlet, the materials degradation, and the inlet. Caracal proposes to find a solution to all of the above mentioned technical obstacles. The outlet is of particular importance since it limits the length of t ...

    SBIR Phase II 2005 Department of DefenseNavy
  7. Naval Device Applications of Relaxor Piezoelectric Single Crystals

    SBC: TRS CERAMICS, INC.            Topic: N02066

    The objectives of this Phase II program are to demonstrate the feasibility of high frequency Tonpilz transducers utilizing PMN-PT single crystal “32” mode resonators poled along . TRS will prepare and characterize the properties of the “32” mode samples by determining the full property matrix for this special crystal cut. These measurements will be based on IEEE standard techniques. NAV ...

    SBIR Phase II 2005 Department of DefenseNavy
  8. New Approaches for Reducing Helmholtz Resonance in Submarine Structures

    SBC: COMBUSTION RESEARCH & FLOW TECHNOLOGY INC            Topic: N04037

    The proposed Phase II effort aims to develop, validate and demonstrate a Computational Fluid Dynamic (CFD) tool capable of predicting the occurrence of Helmholtz resonance in cavities in underwater vehicles. Preliminary validation of the CFD tool and identification of numerical fidelity parameters was carried out in Phase I. Preliminary demonstrations of the feasibility of exerting control by modi ...

    SBIR Phase II 2005 Department of DefenseNavy
  9. Object Avoidance Tactical Decision Aid (OATDA)

    SBC: DANIEL H WAGNER ASSOCIATES INC            Topic: N04086

    In Phase II Daniel H. Wagner Associates, Inc. will develop a full-scale prototype Object Avoidance Tactical Decision Aid (OATDA) that processes all available DD(X) mine avoidance data, dynamically generates a Fused Mine Tactical Picture (FMTP) for the DD(X) Combat System, generates optimal rates to minimize ship vulnerability, and fuses on-board and off-board environmental data. A key capability ...

    SBIR Phase II 2005 Department of DefenseNavy
  10. User-Defined Critics for Software Adaptation

    SBC: EDAPTIVE COMPUTING INC            Topic: SB022037

    Systems often fail because of unknown or unanticipated errors. Software/hardware components that can detect and correct errors would provide substantial cost savings and greatly enhance system reliability. The first step in achieving this goal is to create a paradigm in which the system becomes more “aware” of its operating performance characteristics and conditions that prompt intervention t ...

    SBIR Phase II 2005 Department of DefenseNavy
US Flag An Official Website of the United States Government