You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Biofuel Production from Grease Trap Waste

    SBC: Environmental Fuel Research, LLC            Topic: 13NCERF1

    Environmental Fuel Research, LLC (EFR-LLC), has demonstrated the technical feasibility of separating fats, oils, and greases (FOG) from grease trap waste (GTW) and converting FOG to biodiesel that can meet ASTM specifications. GTW is a dirty and low-value waste from the food service industry that is high in FOG and currently is treated as a liability. The EFR-LLC process uses a bubble column react ...

    SBIR Phase II 2015 Environmental Protection Agency
  2. Wafer Level Supercritical Carbon Dioxide-Based Metal Deposition for Microelectronic Applications

    SBC: MiCell Technologies, Inc.            Topic: 04NCERP1

    This research project involves the application, development, and commercial scale up of a process for the deposition of copper and copper barrier materials such as ruthenium, titanium, and other metals. This process could replace copper electroplating currently used to fill deep trenches and thin-film deposition in microelectronic circuit manufacturing. In addition, physical vapor depo ...

    SBIR Phase II 2005 Environmental Protection Agency
  3. Analysis Tools for Detection and Diagnosis of Biological Threats

    SBC: ALPHA-GAMMA TECHNOLOGIES, INC.            Topic: CBD04113

    DNA microarray technology, in combination with statistical and predictive modeling tools, could be used to evaluate thousands of genes against distinct gene expression patterns induced by chemical/biological agents to provide early identification and speed therapeutic intervention. The overall objective of this Phase II effort is to leverage existing public domain resources and commercial tools t ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  4. Novel THz-frequency spectrometers by integrating widely-tunable monochromatic THz sources and detectors, or arrays of emitters and detectors, with pho

    SBC: ArkLight            Topic: CBD04104

    By continuing teaming up with one of the most reputable university teams in THz science and technology, ArkLight proposes to carry out the tasks set for a Phase-II program following our success in Phase I. We are aimed at the further development of novel spectrometers to analyze chemicals in the vapor phase based on accurate measurements of the emission and absorption spectra due to the molecular ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  5. INDUSTRIAL LAUNDRY WASTE TREATMENT

    SBC: Kenterprice Research, Inc.            Topic: N/A

    A NEWLY DISCOVERED MEMBRANE-LIKE-MATERIAL OFFERS A WAY TO PRE-TREAT INDUSTRIAL LAUNDRY WASTE WATER, CONTAINING OILS, SOLVENTS, AND GREASES TO ABOVE 15, 000 PPM, TO REMOVE THE BULK OF THESE CONTAMINANTS, SO THAT OTHER PROCESSES CAN THEN BE USED TO PRODUCE RE-CYCLE QUALITY WATER. THESE WASTES HAVE ANY CONTAMINANT THAT CAN APPEAR IN THE SYSTEM FROM THE USE OF WIPERS, MATS, UNIFORMS, FILTER BAGS, ETC. ...

    SBIR Phase II 1987 Environmental Protection Agency
  6. One-Step Ceramic Membrane Process for Small Drinking Water Treatment Facilities

    SBC: Media and Process Technology Inc.            Topic: N/A

    A one-step filtration process has been proposed for the removal of turbidity, microorganisms, and THMFP for small drinking water treatment facilities. The essence of the proposed technology is the use of a low cost/high performance ceramic membrane to accomplish the above filtration objectives economically and reliably. Thus, disinfection of drinking water can be accomplished with no chemical ad ...

    SBIR Phase II 1998 Environmental Protection Agency
  7. Re-refining of Spent Ester-Based Synthetic Lubricants

    SBC: Media and Process Technology Inc.            Topic: N/A

    Ester-based synthetic lubricants are used in a variety of applications ranging from low- end, two-stroke oils in chain saws and automotive crankcase oils to high-end, high- performance oils in jet turbines and heavy duty truck transmissions. These materials offer a number of advantages over mineral (petroleum)-based oils, including excellent low temperature fluidity, very high viscosity index, an ...

    SBIR Phase II 1998 Environmental Protection Agency
  8. High Flash Solvent Recovery Using Dual Purpose Ceramic Membrane Technology

    SBC: Media and Process Technology Inc.            Topic: N/A

    Throughout the United States and around the world, a variety of industries are moving from conventional to high flash solvents, including dibasic and other esters, glycol ethers, and terpenes (d-limonene isomers). For instance, approximately 80% of the cleaning solvents used in the screen printing industry, representing more than $50 million per year in solvent sales, are high flash solvents. Al ...

    SBIR Phase II 1998 Environmental Protection Agency
  9. Wafer Level Supercritical Carbon Bioxide-Based Metal Depositon for Microelectronic Applications

    SBC: MiCell Technologies, Inc.            Topic: N/A

    This proposal describes the application, development and commercial scale-up of a process successfully developed under EPA contract number EP-D-04-042 for the deposition of copper and copper barrier materials such as ruthenium, titanium and other metals. This process could replace CU electroplating currently used to fill deep trenches and thin film deposition in microelectronic circuit manufactur ...

    SBIR Phase II 2005 Environmental Protection Agency
  10. Model-Based Design of Test Systems for Chemical Protective Clothing

    SBC: CREARE LLC            Topic: CBD02202

    The current methodology for testing the penetration resistance of textile materials to various chemical agents has a number of drawbacks, including significant uncertainties in the resulting data, inefficiency and expense, risk to test personnel, and limited range of test conditions. The objective of the proposed work is to apply unique computer models for textiles with accompanying experimental ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government