Award Data

Environmental Fuel Research, LLC (EFR-LLC), has demonstrated the technical feasibility of separating fats, oils, and greases (FOG) from grease trap waste (GTW) and converting FOG to biodiesel that can meet ASTM specifications. GTW is a dirty and low-value waste from the food service industry that is high in FOG and currently is treated as a liability. The EFR-LLC process uses a bubble column react ...

Video Demonstration of the Phase I Prototype: http://youtu.be/vS0XzzPl3iU Purpose: This project will develop and test Happy Atoms, a physical modeling set and an interactive iPad app for use in high school chemistry classrooms. Happy Atoms is designed to facilitate student learning of atomic modeling, a difficult topic for chemistry high school students to master. Standard instructional practice ...

This research project involves the application, development, and commercial scale up of a process for the deposition of copper and copper barrier materials such as ruthenium, titanium, and other metals. This process could replace copper electroplating currently used to fill deep trenches and thin-film deposition in microelectronic circuit manufacturing. In addition, physical vapor depo ...

DNA microarray technology, in combination with statistical and predictive modeling tools, could be used to evaluate thousands of genes against distinct gene expression patterns induced by chemical/biological agents to provide early identification and speed therapeutic intervention. The overall objective of this Phase II effort is to leverage existing public domain resources and commercial tools t ...

By continuing teaming up with one of the most reputable university teams in THz science and technology, ArkLight proposes to carry out the tasks set for a Phase-II program following our success in Phase I. We are aimed at the further development of novel spectrometers to analyze chemicals in the vapor phase based on accurate measurements of the emission and absorption spectra due to the molecular ...

A NEWLY DISCOVERED MEMBRANE-LIKE-MATERIAL OFFERS A WAY TO PRE-TREAT INDUSTRIAL LAUNDRY WASTE WATER, CONTAINING OILS, SOLVENTS, AND GREASES TO ABOVE 15, 000 PPM, TO REMOVE THE BULK OF THESE CONTAMINANTS, SO THAT OTHER PROCESSES CAN THEN BE USED TO PRODUCE RE-CYCLE QUALITY WATER. THESE WASTES HAVE ANY CONTAMINANT THAT CAN APPEAR IN THE SYSTEM FROM THE USE OF WIPERS, MATS, UNIFORMS, FILTER BAGS, ETC. ...

This proposal describes the application, development and commercial scale-up of a process successfully developed under EPA contract number EP-D-04-042 for the deposition of copper and copper barrier materials such as ruthenium, titanium and other metals. This process could replace CU electroplating currently used to fill deep trenches and thin film deposition in microelectronic circuit manufactur ...

The current methodology for testing the penetration resistance of textile materials to various chemical agents has a number of drawbacks, including significant uncertainties in the resulting data, inefficiency and expense, risk to test personnel, and limited range of test conditions. The objective of the proposed work is to apply unique computer models for textiles with accompanying experimental ...

Effective collective protection fabrics must have a reliable closure system. During our Phase I Work Plan, Sigma-K began developing a Hermetic Textile Closure Hardware (HATCH) system. The HATCH combines both a magnetic and geometric self locking mechanism that will provide a hermetic seal when closed. Our current Phase I successes include developing self closing samples that can provide a hermetic ...

Under a Phase II program, DRS Scientific will build, test, and deliver a new type of Acousto-Optic Tuned Filter (AOTF) hyperspectral imager that is compact, rugged, and inexpensive, has no moving parts, and is fast and sensitive. It will cover 8-12 micron wavelength range with 10 wavenumber spectral resolution or finer, and will have micro-Flick sensitivity with a cooled camera, and