You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A CLEAN HELIUM COMPRESSOR/EXPANDER FOR LONG LIFE CRYOGENIC SERVICE

    SBC: CREARE LLC            Topic: N/A

    CRYOGENIC HELIUM REFRIGERATORS AND LIQUIFIERS CONVENTIONALLYEMPLOY OIL LUBRICATED POSITIVE DISPLACEMENT COMPRESSORS AT THE WARM END AND FREQUENTLY USE PISTON TYPE EXPANSION ENGINES AT THE COLD END. THESE SYSTEMS REQUIRE EXTENSIVE AND VIGILANT MAINTENANCE TO CONTROL CONTAMINATION FROM LUBRICATING OIL AND ITS VOLATILE COMPONENTS MIGRATING TO THE COLD END. HENCE THE NEED FOR LOW MAINTENANCE COMPRESSO ...

    SBIR Phase II 1987 Department of Energy
  2. ALL-METAL, DEMOUNTABLE CRYOGENIC SEAL

    SBC: CREARE LLC            Topic: N/A

    IN MOST CRYOGENIC SYSTEMS, THE PIPING JOINTS IN COLD REGIONSOF THE SYSTEM ARE MADE BY WELDING OR SOLDERING. THIS IS ESSENTIAL BECAUSE EXISTING DESIGNS OF CRYOGENIC PIPE SEALS CANNOT BE RELIED ON NOT TO LEAK. ANY SUCH LEAKS INTO THE COLD BOX REDUCE THE EFFECTIVENESS OF THE INSULATION, THEREBY REDUCING THE EFFICIENCY OF THE REFRIGERATOR. WELDEDJOINTS MAKE REPLACEMENT OF COMPONENTS DIFFICULT AND HAVE ...

    SBIR Phase II 1987 Department of Energy
  3. Analysis Tools for Detection and Diagnosis of Biological Threats

    SBC: ALPHA-GAMMA TECHNOLOGIES, INC.            Topic: CBD04113

    DNA microarray technology, in combination with statistical and predictive modeling tools, could be used to evaluate thousands of genes against distinct gene expression patterns induced by chemical/biological agents to provide early identification and speed therapeutic intervention. The overall objective of this Phase II effort is to leverage existing public domain resources and commercial tools t ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  4. An Innovative Technique of Preparing Solar Grade Silicon Wafers from Metallurgical Grade Silicon by In-Situ Purification

    SBC: GT Equipment Technologies, Inc.            Topic: 39a

    75655S The photovoltaics (PV) industry is having difficulty finding enough raw materials to match its rapid growth. In addition, traditional sources of secondary grade polysilicon are no longer readily available at inexpensive prices. Reducing the cost of solar silicon wafers is the key to lowering the price of crystalline silicon solar cells. This project will develop a single-step wafer fabr ...

    SBIR Phase II 2005 Department of Energy
  5. A Robust Microfabricated Specimen Support with Integrated Capabilities for in situ Experimentation in the Transmission Electron Microscope

    SBC: Protochips, Inc.            Topic: 23

    As the nanotechnology revolution advances, existing and new applications are demanding improved capabilities from the transmission electron microscope ¿ in particular, higher resolution and a greater ability to manipulate specimens in situ. No known commercial system provides both accurate control over specimen temperature and the simultaneous ability to create a stable gaseous environment. T ...

    SBIR Phase II 2006 Department of Energy
  6. DOSIMETRY AND MONITORING OF AROMATIC AMINES

    SBC: Perfect View Inc.            Topic: N/A

    UP TO 35,000 WORKERS OF THE U.S. CHEMICAL INDUSTRY AND MORE THAN 270,000 WORKERS IN THE PETROLEUM AND COAL-RELATED INDUSTRIES MAY BE EXPOSED DAILY TO CARCINOGENIC AND MUTANOGENIC COMPOUNDS FROM THE AROMATIC AMINE GROUP. COAL GAS, INC. DEVELOPED A VERY SIMPLE HIGH-TECHNOLOGY APPROACH TO MONITORING THE EXPOSURE OF PERSONNEL TO TRACE LEVELS OF POLLUTANTS AND IS PROPOSING TO CONDUCT R & D WHICH WILL E ...

    SBIR Phase II 1987 Department of Energy
  7. ENZYMES IMMOBILIZED ON GOLD SURFACES

    SBC: Escagenetics Corp.            Topic: N/A

    THE OBJECTIVE OF THIS PROJECT IS TO DEVELOP A NEW CLASS OF BIOSENSORS BASED ON THE USE OF COLLOIDAL GOLD DIRECTLY OR DEPOSITED AS A POROUS GOLD FILM. THE KEY TO THE APPROACH ISTHE IMMOBILIZATION OF ENZYMES ON GOLD SURFACES THAT PROVIDE FOR HIGHFLUX, HETEROGENEOUS ELECTRON TRANSFER. THE FEASIBILITY OF CONSTRUCTING THIS NEW CLASS OF BIOSENSORS WILL BE EVALUATED BY THE END OF PHASE I. THE OBJECTIVES ...

    SBIR Phase II 1987 Department of Energy
  8. Handheld FT-IR/Photoacoustic Chemical Agent Detector

    SBC: MANNING APPLIED TECHNOLOGY            Topic: CBD05112

    Manning Applied Technology proposes development of the MP-100 handheld FT-infrared photoacoustic chemical agent detector, following a highly successful Phase I effort. Chemical attacks and accidents can be mitigated partially by cost-effective sensors. High priority programs will benefit from a sensor compliant to Joint Warning & Reporting Network (JWARN) standards. The device is ideally suited to ...

    SBIR Phase II 2006 Department of DefenseOffice for Chemical and Biological Defense
  9. Hermetic Textile Closure Hardware System

    SBC: SIGMA K CORP            Topic: CBD04110

    Effective collective protection fabrics must have a reliable closure system. During our Phase I Work Plan, Sigma-K began developing a Hermetic Textile Closure Hardware (HATCH) system. The HATCH combines both a magnetic and geometric self locking mechanism that will provide a hermetic seal when closed. Our current Phase I successes include developing self closing samples that can provide a hermetic ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  10. Low Cost Carbon Fiber Composites for Lightweight Vehicle Parts

    SBC: MATERIALS INNOVATION TECHNOLOGIES, LLC            Topic: 27

    The U.S. could significantly reduce oil consumption by decreasing the weight of its automobile fleet, especially by using lightweight carbon composite materials. However, lightweight materials in automobile structures have been problematic for two reasons: (1) the high cost of carbon fiber materials themselves, and (2) the high processing costs of these materials. Although programs exist to red ...

    SBIR Phase II 2006 Department of Energy
US Flag An Official Website of the United States Government