You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Synergistic and Smart Micro-Controls for Enhanced SCBA Equipment

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: CBD14103

    This proposal outlines the successful demonstration of electrochemical CO2 removal that generates virtually no heat, from a humid breathing gas mixture. Mainstream evaluated micro-sensors for monitoring temperature, humidity, CO2, and O2 for breath monitoring for the self-contained breathing apparatus (SCBA). Advanced CO2 separating technology combined with micro-sensors and controls allows for op ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  2. Enabling Flexible Materials, Devices and Processes for Defense

    SBC: American Semiconductor, Inc.            Topic: AF121003

    ABSTRACT:Emergence and feasibility for flexible body-worn electronics and particularly medical patches requires high performance electronics capability.The problem is that these new technologies must have flexible and conformal physical formats and conventional electronic components are not in any way flexible. In the CLAS Phase I program, a new flexible high-performance manufacturing and material ...

    SBIR Phase II 2014 Department of DefenseAir Force
  3. A Novel High-Conductance Thermal Interface for Aerospace Electronics

    SBC: CREARE LLC            Topic: AF131077

    ABSTRACT: Current Separable Thermal Mechanical Interfaces (STMIs) found in advanced digital processing electronics are unable to efficiently remove dissipated heat, limiting performance far below their capability. The standard approach produces high contact resistance (~1.0C-in./W) with local variations in excess of 25%, severely limiting allowable electronic power levels. During this program, ...

    SBIR Phase II 2014 Department of DefenseAir Force
  4. New Radar Exploitation Methods for Combat Identification

    SBC: Signal Innovations Group, Inc.            Topic: AF131130

    ABSTRACT: The Phase II program will develop and mature a new salient physics-driven solution for CID feature design and classification to support onboard CID and decision fusion for remotely piloted vehicles. Saliency analysis will be used to develop databases of compact, simple geometric features derived from known, discriminative, and robust scattering physics. A new Bayesian probabilistic cla ...

    SBIR Phase II 2014 Department of DefenseAir Force
  5. An Adaptive-Configuration Control System for Aircraft Thermal and Energy Management System

    SBC: CREARE LLC            Topic: AF131165

    ABSTRACT: Hybrid technologies and adaptive resource management can significantly enhance the capability and range of next-generation aircraft. To implement this strategy, we propose to develop a control system to configure the Adaptive Power and Thermal Management System (APTMS) based on the subsequent flight profile to enable the APTMS to use the most appropriate cooling system(s), heat sink(s) ...

    SBIR Phase II 2014 Department of DefenseAir Force
  6. Fast Pyrolytic Solid Waste Remediation for Small Contingency Base Camps

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: OSD12EP2

    ABSTRACT: Mainstream Engineering Corporation (MEC) proposes developing a pyrolytic solid waste remediation system (py-SWRS) for processing mixed waste at small contingency base camps. The proposed py-SWRS unit is an updated and improved version of a portable pyrolysis reactor already under development at MEC for greenwaste processing at landfills located on large, fixed DoD installations. MEC"s p ...

    SBIR Phase II 2014 Department of DefenseAir Force
  7. Fastener Measurement Tool

    SBC: CREARE LLC            Topic: AF131120

    ABSTRACT: Accurate measurement of fastener profile relative to the aircraft skin is critical to ensure that aircraft meet operation specifications and to identify areas that require rework to meet tight manufacturing tolerances. Current measurement methods rely on mechanical dial indicators that struggle to provide the required accuracy, are difficult to use in tight areas, and demand a high deg ...

    SBIR Phase II 2014 Department of DefenseAir Force
  8. Direct Printing of 3D Structural RF Electronics

    SBC: Sciperio, Inc.            Topic: AF121003

    ABSTRACT: Using the advantages of 3D printing, an antenna system wing structure will be printed. The antenna system will be a multi-layer electronic device with a number of antenna elements. The electronics will not be mounted to the wing structure, they will become part of the wing structure. This implies an impact to Size, Weight and Power (SWaP) for UAVs. The payload will become part of th ...

    SBIR Phase II 2014 Department of DefenseAir Force
  9. Miniature Air Launched Rawinsonde and Dropsonde (MALRD)

    SBC: Wintec, Inc.            Topic: AF112194

    ABSTRACT: The main objective of the MALRD SBIR Phase II research is to develop design alternatives to collect atmospheric data using a novel concept whereby a F-16 fighter aircraft equipped with a ALE-47 countermeasure dispenser system (CMDS) may alternatively serve as an air-launched instrumentation-dispense platform. Specific atmospheric data will be collected by the dropsonde sensors including ...

    SBIR Phase II 2014 Department of DefenseAir Force
  10. Light-weight, Low-volume, High Oxygen Storage Density Material for Self-Contained Breathing Apparatus

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: CBD12105

    This proposal outlines Mainstreams successful Phase I feasibility demonstration related to the fabrication of hierarchical hybrid nanomaterials for oxygen storage vessels. These vessels exceed the volumetric and gravimetric storage capacity of an oxygen cylinder by 245% and 170%, respectively. Included in these storage density values is a solid-state oxygen regulation system that also enables comp ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government