You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Synergistic and Smart Micro-Controls for Enhanced SCBA Equipment

    SBC: MAINSTREAM ENGINEERING CORP            Topic: CBD14103

    This proposal outlines the successful demonstration of electrochemical CO2 removal that generates virtually no heat, from a humid breathing gas mixture. Mainstream evaluated micro-sensors for monitoring temperature, humidity, CO2, and O2 for breath monitoring for the self-contained breathing apparatus (SCBA). Advanced CO2 separating technology combined with micro-sensors and controls allows for op ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  2. Flexible, Compact Acoustic Transducer Arrays

    SBC: INTERDISCIPLINARY CONSULTING CORP            Topic: A12086

    For military applications, acoustic arrays can provide target signatures and locations of aircrafts, vehicles, weapons and personnel. Additional benefits of arrays include immunity to jamming, low cost, low weight and low power consumption. Acoustic beamforming using conventional arrays typically require 10~100s of microphones and have an aperture size ranging from several inches to several feet ...

    SBIR Phase II 2014 Department of DefenseArmy
  3. High-Temperature Hybrid Foil Bearing for Unmanned Aerial System Gas Turbines

    SBC: CREARE LLC            Topic: A12104

    Small unmanned aerial systems (UAS) are a critical element in current military operations, and their use will increase substantially in the future. The propulsion system is a key design constraint in any UAS, and current small gas turbines for these vehicles are limited by the conventional oil-lubricated rolling element bearings used to suspend their high-speed rotating assemblies. Gas-lubricated ...

    SBIR Phase II 2014 Department of DefenseArmy
  4. Extended Range Low Power Personnel Detection and Classification Sensor

    SBC: PLASMONICS INC            Topic: A12038

    In the first phase of this program Plasmonics was able to make a breadboard profile sensor using COTS optics and a pyroelectric-linear-detector array that was able to detect a human by subtending greater than 16 pixels across the target at a range of up to 75 m. Based on work in Phase I, it was concluded that the design of existing COTS linear-detector arrays was insufficient to achieve a range of ...

    SBIR Phase II 2014 Department of DefenseArmy
  5. Light-weight, Low-volume, High Oxygen Storage Density Material for Self-Contained Breathing Apparatus

    SBC: MAINSTREAM ENGINEERING CORP            Topic: CBD12105

    This proposal outlines Mainstreams successful Phase I feasibility demonstration related to the fabrication of hierarchical hybrid nanomaterials for oxygen storage vessels. These vessels exceed the volumetric and gravimetric storage capacity of an oxygen cylinder by 245% and 170%, respectively. Included in these storage density values is a solid-state oxygen regulation system that also enables comp ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  6. Physics-Based, High Resolution Soil Strength Prediction

    SBC: CREARE LLC            Topic: A12094

    Effective Army-scale mobility predictions in austere environments require knowledge of soil strength conditions at high spatial resolution (100 m or less). Knowledge of the battlespace is greatly hindered because available weather-scale near-surface soil moisture data, a primary indicator of soil strength, is limited by its coarse spatial resolution (125 km). Moreover, there are no adequate method ...

    SBIR Phase II 2014 Department of DefenseArmy
  7. Hermetic Seals for Chemical/Biological Protective Garments

    SBC: CREARE LLC            Topic: CBD13109

    Interfaces on existing military chemical/biological protection garments are not designed to fully eliminate macroscopic and microscopic air gaps at folds, fabric surfaces, or hook-and-loop closures, and thus do not provide a hermetic barrier against exposure. Creare proposes to develop a hermetic garment closure system that seals macroscopic and microscopic gaps at interfaces and closures and pro ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  8. SiC Based Electrical Distribution for High Voltage Vehicle Power Systems

    SBC: CREARE LLC            Topic: A12118

    Power system upgrades for next generation ground combat vehicles require technology advances such as higher operating temperature, greater power density, and increased functionality. Silicon Carbide (SiC) based power electronic devices offer advantages over silicon devices, especially for high voltage buses, and Creare is currently developing a SiC based 12 channel, +/ 300 VDC Solid State Electric ...

    SBIR Phase II 2014 Department of DefenseArmy
  9. A Miniature Autoinjector for Multicomponent Drugs and Vaccines

    SBC: CREARE LLC            Topic: CBD13106

    Chemical, biological, or toxin attacks in military and civilian settings are a serious and growing concern. Standard first aid for exposure to some chemical warfare agents and toxins includes the immediate administration of relevant antidotes using an autoinjector. When an attack occurs, pre-filled autoinjectors must be immediately available and thus highly portable, and they must be suitable fo ...

    SBIR Phase II 2014 Department of DefenseOffice for Chemical and Biological Defense
  10. Prognostic Wear Prediction Tool for BlackHawk Hanger Bearings

    SBC: SENTIENT SCIENCE CORPORATION            Topic: A04077

    During Phase I, the Blackhawk hanger bearing and oil cooler fan bearing applications were studied in detail, including analysis of vibration and temperature data from used oil cooler bench tests (conducted by Sikorsky) and used hanger bearing bench tests (conducted by Sentient). This data, along with an analysis of operational and environmental conditions, has allowed us to identify the probable r ...

    SBIR Phase II 2005 Department of DefenseArmy
US Flag An Official Website of the United States Government