You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. SBIR Phase II: Ultrasonic Nanocoining for Creating Large, Low-Cost Arrays of Sub-Wavelength Features

    SBC: SMART MATERIAL SOLUTIONS INC            Topic: MN

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase II project will be in development of Ultrasonic Nanocoining - a new platform technology that is used to generate plastic films or glass panels that are anti-reflective, self-cleaning, or colored through structure. Such nano-structured surfaces can provide benefits for a wide array of commercial applicat ...

    SBIR Phase II 2017 National Science Foundation
  2. SBIR Phase II: Microfilm to enable enhanced mixing in low-resource diagnostics

    SBC: Redbud Labs, Inc.            Topic: MI

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase II project is in its ability to improve healthcare in fundamental ways, such as (1) low volume draws that will enable diagnostics in low-resource settings like drug stores, at home, or in developing countries, (2) higher quality small-volume samples to make Point-of-Care (POC) diagnostics more competiti ...

    SBIR Phase II 2017 National Science Foundation
  3. Signal Processing for Layered Sensing

    SBC: VADUM INC            Topic: CBD152006

    Vadum will develop Chemical, Heterogeneous sensor fusion Incident awareness Module (CHIME)asoftware module that will ingest data from a large number of asynchronous, heterogeneous and multi-tiered sensors to automate the process of estimating the source attributes of a chemical or biological release. CHIME generates estimates from a continuous stream of raw sensor data with successive estimates al ...

    SBIR Phase II 2017 Department of DefenseOffice for Chemical and Biological Defense
  4. Analysis Tools for Detection and Diagnosis of Biological Threats

    SBC: ALPHA-GAMMA TECHNOLOGIES, INC.            Topic: CBD04113

    DNA microarray technology, in combination with statistical and predictive modeling tools, could be used to evaluate thousands of genes against distinct gene expression patterns induced by chemical/biological agents to provide early identification and speed therapeutic intervention. The overall objective of this Phase II effort is to leverage existing public domain resources and commercial tools t ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  5. STUDY OF SHOCK WAVE PROPAGATION AND PHASED-ARRAY FOCUSING FOR LITHOTRIPSY

    SBC: Applied Research Associates, Inc.            Topic: N/A

    THIS PHASE I EFFORT WILL APPLY THEORETICAL METHODS BASED PRINCIPALLY ON CAGNIARD'S FORMALISM (PREVIOUSLY INCORPORATED BY US INTO OUR POWERFUL SWREF CODE), TO THE PROPAGATION AND FOCUSING, IN BOTH REFLECTIVE AND PHASED-ARRAY EQUIPMENT, OF SHOCK-WAVES PRODUCED BY UNDERWATER SPARKS. THE OBJECTIVE IS TO INVESTIGATE AND PROVIDE DESIGN DATA FOR LITHOTRIPSY EQUIPMENT IN WHICH FOCUSED SHOCK WAVES ARE USED ...

    SBIR Phase II 1987 National Science Foundation
  6. THE SUSPENSION CORE DRILL

    SBC: Browning Engineering            Topic: N/A

    CONVENTIONAL ROCK CORE DRILLING AT GREAT DEPTHS IS EXTREMELY EXPENSIVE AND TIME CONSUMING. ITS MAJOR DRAWBACK IS THE REQUIRED LENGTH OF DRILL PIPE. THE SUSPENSION CORE DRILL IS SUPPORTED BY CONTINUOUS FLEXIBLE LEADS HELD ON ONE OR MORE HIGH-SPEED REELS. WITHDRAWALS AND REPLACEMENT TIMES CAN BE REDUCED BY AN ORDER-OF-MAGNITUDE. COMMERCIAL USES INCLUDE STANDARD CORING APPLICATIONS AS WELL AS INTERMI ...

    SBIR Phase II 1987 National Science Foundation
  7. ACTIVELY CONTROLLED GAS BEARINGS

    SBC: Burton Technologies Inc            Topic: N/A

    RESEARCH AND DEVELOPMENT WILL BE CARRIED OUT TO PROVIDE PROTOTYPE, ACTIVELY CONTROLLED GAS BEARINGS FOR PRECISION MOVEMENT IN INSTRUMENTS AND MACHINE TOOLS. THIS WILL DRAW UPON PRELIMINARY WORK ON (1) FABRICATION, (2) DYNAMIC ANALYSIS OF THE BEARING AND SUPPORTED MASS, (3) PIEZOELECTRIC VALVING AND PIEZOELECTRIC DISPLACEMENT OF THE BEARING SURFACE, AND (4) THE ADAPTATION OF A MICROPROCESSOR TO SER ...

    SBIR Phase II 1987 National Science Foundation
  8. SBIR Phase II: Device for In-ovo Targeting and Delivery to the Early Chicken Embryo

    SBC: Embrex            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project integrates the imaging system developed in Phase I with a smart-sensor injection system that can inject or sample from the cavity underlying the early chicken embryo with high levels of accuracy accompanied with improved hatch when compared to manual methods. The Phase I work showed that it was possible to image and detect the blasto ...

    SBIR Phase II 2005 National Science Foundation
  9. SBIR Phase II: Creating Functionally Decomposed Surface Models from Measured Data

    SBC: GEOMAGIC, INC.            Topic: N/A

    This Small Business Innovation Research Phase II project deals with the problems of reconstructing complex free-form shapes from measured data. Raindrop Magic's primary interest is to produce well-structured, high-quality CAD models. Several techniques exist to reach this goal; unfortunately, automatic surfacing systems provide only rough approximations and do not capture the original design int ...

    SBIR Phase II 2005 National Science Foundation
  10. SBIR Phase II: Applications of Morse Theory in Reverse Engineering

    SBC: GEOMAGIC, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will investigate applications of Combinatorial Morse Theory in Reverse Engineering, a field that focuses on converting physical objects into a digital representation suitable for CAD, CAM, and CAE. The biggest challenge in this field is to automate the conversion process while producing a model that meets all the requirements of downs ...

    SBIR Phase II 2005 National Science Foundation
US Flag An Official Website of the United States Government