You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Very High Dynamic Range RF Two Tone Measurement Instrument and Sensor

    SBC: VADUM INC            Topic: A15019

    Vadum will implement and test a novel Nonlinear Automated Measurement System (NAMS) instrument package designed in Phase-I to perform very high dynamic range RF two-tone measurements.The NAMS will be an integrated instrument with software for performing rapid, automated linear and nonlinear large signal RF measurements.The prototype instrument utilizes an active feed-forward canceller to achieve a ...

    SBIR Phase II 2018 Department of DefenseArmy
  2. Prognostic Wear Prediction Tool for BlackHawk Hanger Bearings

    SBC: SENTIENT SCIENCE CORPORATION            Topic: A04077

    During Phase I, the Blackhawk hanger bearing and oil cooler fan bearing applications were studied in detail, including analysis of vibration and temperature data from used oil cooler bench tests (conducted by Sikorsky) and used hanger bearing bench tests (conducted by Sentient). This data, along with an analysis of operational and environmental conditions, has allowed us to identify the probable r ...

    SBIR Phase II 2005 Department of DefenseArmy
  3. Optimized Geospatial Tool for Ambient Soundscapes

    SBC: Blue Ridge Research and Consulting, LLC            Topic: A16102

    This proposal addresses the need to further develop a robust and validated soundscape modeling tool for accurate predictions of biological, geophysical, and anthropogenic activity in CONUS and OCONUS environments. The Phase II development of the geospatial and acoustic training databases will focus on strengthening the geospatial diversity of the data by employing purposeful data collection techni ...

    SBIR Phase II 2018 Department of DefenseArmy
  4. Multi-Resolution Representations and Simulation of Large Terrain Models

    SBC: COLLIDE, INC.            Topic: A03207

    We propose to develop multiresolution representations and algorithms for synthetic terrain environments. They will be used for representing large terrain models as well dynamic and atmospheric simulations. Our ultimate goal is to increase the validity of the simulation by incorporating the multiple models at varying resolutions. We will use the OneSAF simulation Product Line Architecture Framework ...

    SBIR Phase II 2005 Department of DefenseArmy
  5. Model-Based Design of Test Systems for Chemical Protective Clothing

    SBC: CREARE LLC            Topic: CBD02202

    The current methodology for testing the penetration resistance of textile materials to various chemical agents has a number of drawbacks, including significant uncertainties in the resulting data, inefficiency and expense, risk to test personnel, and limited range of test conditions. The objective of the proposed work is to apply unique computer models for textiles with accompanying experimental ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  6. Metamorphic Buffer Layer Growth for Bulk InAs(x)Sb(1-x) LWIR Detectors

    SBC: QMAGIQ LLC            Topic: A16AT009

    Bulk InAs(x)Sb(1-x) is an infrared detector material that promises higher quantum efficiency than antimony-based superlattices in the longwave infrared (LWIR). This is due to the longer diffusion length of minority carrier holes in the bulk than in superlattices where they are localized. No native substrate exists for lattice-matched growth of InAs(x)Sb(1-x) material with LWIR bandgaps. So a key c ...

    STTR Phase II 2018 Department of DefenseArmy
  7. Hermetic Textile Closure Hardware System

    SBC: SIGMA K CORP            Topic: CBD04110

    Effective collective protection fabrics must have a reliable closure system. During our Phase I Work Plan, Sigma-K began developing a Hermetic Textile Closure Hardware (HATCH) system. The HATCH combines both a magnetic and geometric self locking mechanism that will provide a hermetic seal when closed. Our current Phase I successes include developing self closing samples that can provide a hermetic ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  8. Hermetic Seals for Chemical/Biological Protective Garments

    SBC: CREARE LLC            Topic: CBD13109

    Interfaces on existing military chemical/biological protection garments are not designed to fully eliminate macroscopic and microscopic air gaps at folds, fabric surfaces, or hook-and-loop closures, and thus do not provide a hermetic barrier against exposure. Creare is developing hermetic garment closure systems that seal macroscopic and microscopic gaps at interfaces and closures and provide high ...

    SBIR Phase II 2018 Department of DefenseOffice for Chemical and Biological Defense
  9. ENVIRONMENTALLY ACCEPTABLE CLEANING PROCESSES

    SBC: CREARE LLC            Topic: N/A

    THE PROPOSED PROJECT ADDRESSES THE REPLACEMENT OF CFC-113 (FREON) AS A CLEANING AGENT, BOTH GENERALLY AND WITH SPECIFIC ATTENTION TO THE CLEANIUG OF METALS AND COMPOSITES. THE PHASE I WORK WILL PROVIDE A COMPREHENSIVE CHARACTERIZATION OF CLEANIUG REQUIREMENTS AND KNOWN METHODS. THE APPROACH IS MULTIDISCIPLINARY ENCOMPASSING UTILIZATION OF FORCES OF VARIOUS KINDS, AS WELL AS SIMPLE REPLACEMENT OF T ...

    SBIR Phase II 1993 Department of DefenseArmy
  10. Development of an Improved General Purpose Tent Fabric

    SBC: WARWICK MILLS INC            Topic: A16115

    Low cost polyurethane laminate tent materials are designed to solve the cold crack issue with PVC tent fabrics. The use of novel construction of urethane/textile laminates offers a breakthrough in environmental durability over current offerings. This new high durability laminate configuration provides for a new class of economical lightweight shelters with extended operating capability. Using a co ...

    SBIR Phase II 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government