You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Prognostic Wear Prediction Tool for BlackHawk Hanger Bearings

    SBC: Sentient Science Corporation            Topic: A04077

    During Phase I, the Blackhawk hanger bearing and oil cooler fan bearing applications were studied in detail, including analysis of vibration and temperature data from used oil cooler bench tests (conducted by Sikorsky) and used hanger bearing bench tests (conducted by Sentient). This data, along with an analysis of operational and environmental conditions, has allowed us to identify the probable r ...

    SBIR Phase II 2005 Department of DefenseArmy
  2. Design and Life Prediction Methodologies for Weight Efficient Ceramic Matrix Composite (CMC) Propulsion Components

    SBC: MATERIALS RESEARCH & DESIGN INC            Topic: N04018

    The performance of the JSF can be improved by reducing the weight of the propulsion system. The JSF is powered by either Pratt & Whitney’s (P&W) F135 engine or General Electric’s F136 engine. Both engines use a common exhaust system produced by P&W. One attractive approach to reducing the weight of the JSF propulsion system is to replace high density metal nozzle compo-nents with CMCs. In f ...

    SBIR Phase II 2005 Department of DefenseNavy
  3. Development of Joint Strike Fighter Lift Fan Drive Shaft (MSC P5044)

    SBC: Materials Sciences LLC            Topic: N04020

    The goal of this SBIR project is to develop and demonstrate lightweight, low cost, drive shaft concepts for use in high performance rotating engine drive systems, with specific focus on the STOVL life fan system. During the Phase I program, a proof-of-concept prototype tube was fabricated to establish manufacturing feasibility, verify weight estimates and support cost studies. The design concept ...

    SBIR Phase II 2005 Department of DefenseNavy
  4. Novel Approaches to Fabricate High Flux Density Magnetic Materials

    SBC: ADVANCED MATERIALS CORP.            Topic: N04158

    Advanced Materials Corporation proposes to optimize the process to manufacture soft magnetic materials that are anticipated to be superior to M19 steels both in magnetic induction and in electrical resistivity. Proof-of-concept studies conducted during Phase I have demonstrated the superior magnetic properties of the new material in comparison to M19 steel. Further optimization studies are propose ...

    SBIR Phase II 2005 Department of DefenseNavy
  5. Mid-Frequency Sonobuoy

    SBC: NAVMAR APPLIED SCIENCES CORPORATION            Topic: N03033

    Active multistatic sonar systems have become the preferred solution for shallow water undersea warfare missions. Most airborne active multistatic systems operate in the low frequency range to provide increased range and reverberation resistance. Tactical follow up to large area search and target tracking are better accomplished by using higher frequencies, which provide high range resolution and s ...

    SBIR Phase II 2005 Department of DefenseNavy
  6. Rapid Multianalyte Yocomolar Biosensor Platform

    SBC: BioElectroSpec            Topic: HSB041002

    The overall goal of this Phase II SBIR project is to develop a platform biosensor technology for rapid, multianalyte detection of biological and chemical analytes such as proteins, peptides, nucleic acids, toxins, bacteria, viruses, drugs, narcotics, explosive materials, and other molecules of interest in the biodefense and biomedical areas. We propose to build a hand-held, robust device similar t ...

    SBIR Phase II 2005 Department of Homeland Security
  7. Passivation of Dislocation Defects by Hydrogenation for High Performance Longwave Infrared (LWIR) HgCdTe on Silicon

    SBC: Amethyst Research Incorporated            Topic: A04119

    Production of low cost, large format HgCdTe LWIR focal plane arrays (FPAs) requires delivery of low defect density HgCdTe epilayers on Si. Despite the significant lattice mismatch between Si and HgCdTe several companies have demonstrated high performance MBE grown MWIR (3-5 microns)-HgCdTe devices on large-area Si substrates. This success has not translated directly to LWIR (8-12 microns)-HgCdTe d ...

    SBIR Phase II 2005 Department of DefenseArmy
  8. Automatic Three-Dimensional (3-D) Target Template Generation

    SBC: INTERNATIONAL ASSOCIATION OF VIRTUAL ORGANIZATIONS, INCORPORATED            Topic: N05017

    The US Navy is seeking improved capabilities to quickly and efficiently generate 3-D target templates (or “site models”) to support such operational systems as the Tomahawk Command and Control Systems (TC2S), Distributed Common Ground Station-Navy (DCGS-N), and collateral damage assessment (e.g., CDET and FastCD). There are two parts of interest. The first is to extract valid and reliable 2-D ...

    SBIR Phase II 2005 Department of DefenseNavy
  9. Object Avoidance Tactical Decision Aid (OATDA)

    SBC: DANIEL H. WAGNER ASSOCIATES, INCORPORATED            Topic: N04086

    In Phase II Daniel H. Wagner Associates, Inc. will develop a full-scale prototype Object Avoidance Tactical Decision Aid (OATDA) that processes all available DD(X) mine avoidance data, dynamically generates a Fused Mine Tactical Picture (FMTP) for the DD(X) Combat System, generates optimal rates to minimize ship vulnerability, and fuses on-board and off-board environmental data. A key capability ...

    SBIR Phase II 2005 Department of DefenseNavy
  10. Air Blast & Ballistic Impact Damage Evaluation of Marine Composite Structures (MSC P1T11-437)

    SBC: Materials Sciences LLC            Topic: N03052

    U.S. Navy warships of the 21st century will likely use fiber-reinforced composites in the topside structure. As a result, enhancing resistance to high-energy blast/ballistic loading has become a priority to ensure the survivability of the composite structures. Because of the wide range of design options available with composites, analytic tools are more cost effective than a purely empirical appr ...

    SBIR Phase II 2005 Department of DefenseNavy
US Flag An Official Website of the United States Government