You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. 3 Dimensional Nano-Scale Reinforcement Architecture for Advanced Composite Structures

    SBC: 3TEX, Inc.            Topic: AF04T020

    Three-dimensional woven and braided fiber architectures provide important advantages to composites, including suppression of delamination, high damage tolerance, improved through-the-thickness properties, simplicity and cost-effectiveness of manufacturing complex composite structural components. However, in order to diversify applications and reach high volumes of utilization of these materials in ...

    STTR Phase II 2005 Department of DefenseAir Force
  2. Low Cost Electro-Optic Sensors for Mini/Micro UAV’s

    SBC: AKAMAI PHYSICS, INC.            Topic: AF04229

    Imaging laser radar is evolving into an important tactical sensor, which may be fielded on UAVs. However, UAV systems range in size from micro systems, which have payload requirements of a few ounces to the mini UAVs with payload requirements of tens of pounds. This provides the designer of UAV based laser radars with considerable problems in selecting laser sources to fit in these vehicles. Th ...

    SBIR Phase II 2005 Department of DefenseAir Force
  3. Analysis Tools for Detection and Diagnosis of Biological Threats

    SBC: ALPHA-GAMMA TECHNOLOGIES, INC.            Topic: CBD04113

    DNA microarray technology, in combination with statistical and predictive modeling tools, could be used to evaluate thousands of genes against distinct gene expression patterns induced by chemical/biological agents to provide early identification and speed therapeutic intervention. The overall objective of this Phase II effort is to leverage existing public domain resources and commercial tools t ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  4. Novel THz-frequency spectrometers by integrating widely-tunable monochromatic THz sources and detectors, or arrays of emitters and detectors, with pho

    SBC: ArkLight            Topic: CBD04104

    By continuing teaming up with one of the most reputable university teams in THz science and technology, ArkLight proposes to carry out the tasks set for a Phase-II program following our success in Phase I. We are aimed at the further development of novel spectrometers to analyze chemicals in the vapor phase based on accurate measurements of the emission and absorption spectra due to the molecular ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  5. High Repetition Rate Pulsed Power Generators

    SBC: ASR Corporation            Topic: AF04009

    The development of a high pulse repetition rate (PRR) Marx generator, and the coupling of the Marx generator to the appropriate antenna system, will enable the development of a new series of radiation sources that not only have a high peak power output, but can be operated at high PRR. Such a pulsed power source will address the limitations of many current sources and provide a solution for many ...

    SBIR Phase II 2005 Department of DefenseAir Force
  6. Demonstration of Multiple Fiber Pre-forms for Local Property Tailoring

    SBC: Bally Ribbon Mills            Topic: AF04249

    Ribbon Mills and its subcontractor Northrop Grumman Corporation (NGC) propose a Phase II program, to continue the research into advanced complex performs concepts utilizing weaving technology applied to state-of-the-art composites to enhance the revolutionary low frequency, conformal load-bearing antenna structures (CLAS) foliage penetration ground/air moving target indicator (FOPEN GMTI/AMTI) rad ...

    SBIR Phase II 2005 Department of DefenseAir Force
  7. Improved Trajectory Control for Penetration into Soils at 4000 ft/sec

    SBC: DE TECHNOLOGIES, INC            Topic: AF04160

    We propose to develop an earth penetrator with improved shape for trajectory stability during high-speed penetration. Several promising penetrator shaping concepts have been identified in Phase I. Through further analysis, one or two of these will be selected for further development. Penetrator designs will be formulated and optimized, then tested through gun firings of scale-model penetrators int ...

    SBIR Phase II 2005 Department of DefenseAir Force
  8. Innovative Filtering Techniques for Ground Target Tracking

    SBC: DANIEL H WAGNER ASSOCIATES INC            Topic: AF04204

    The project focus is the development of a ground target tracking algorithm to support the JSTARS radar operating in the GMTI mode. Multiple hypothesis tracking (MHT) algorithms maintain alternative data associations to represent report-to-track association ambiguities. In Phase 1 we developed a prototype MHT algorithm not requiring the Bayes’ posterior distribution for the target state to be G ...

    SBIR Phase II 2005 Department of DefenseAir Force
  9. A Decomposition Based Approach to Optimal Layout of Complex Systems such as UAV’s and Satellites

    SBC: Desantage Corporation            Topic: AF04T019

    The design of Unmanned Aerial Vehicles (UAV’s) is a complex process of creating a reliable system of reasonable cost that can survive in hostile environments. Although UAV’s have unique aspects to them, similar goals can be found in almost any complex, competitive product. One aspect of the design of these systems that tends to be both difficult and poorly supported with available computer ...

    STTR Phase II 2005 Department of DefenseAir Force
  10. Shear Stress Sensor Using Shape Memory Films

    SBC: DOMINCA LLC            Topic: AF03T010

    There is a need for a low profile, simple, accurate, localized, responsive sensor to measure shear stress in fluid flow. The unusual properties of shape memory alloys, and of Ni2MnGa in particular, suggest they could be sensing elements for shear. In recent years, single crystal films of Ni2MnGa have been grown by Molecular Beam Epitaxy (MBE). Once released from their substrate, these films hav ...

    STTR Phase II 2005 Department of DefenseAir Force
US Flag An Official Website of the United States Government