Award Data

"The ability to determine air pollutant emission quantity and emission rate are extremely important for environmental protection, policy making, and law enforcement. A pollutant emission rate can be determined by calculating the product of the airflow rate from an exhaust fan and the composition of the pollutant in the air. The pollutant may be any number of things, including particulate matters ...

"Cellulosic ethanol is a desirable transportation fuel for environmental and economic reasons. One of the issues limiting the commercialization is the utilization of xylose which is not fermented to ethanol by conventional brewing yeasts. Trillium Fiber Fuels is pioneering the use of xylos isomerase to convert xylose to fermentable xylulose. While this can be accomplished with existing industri ...

Interior wood composite panels are widely used for furniture, bookshelf, kitchen cabinets, flooring, and other building materials, and are predominantly made with carcinogenic urea-formaldehyde (UF) resin. New formaldehyde-free wood adhesives that mainly consist of abundant, renewable, and readily available soybean flour and novel curing agents have been developed in a laboratory and successfully ...

A new type of compact induction accelerator currently under development at the Lawrence Livermore National Laboratory (LLNL) promises to increase the average accelerating gradient by at least an order of magnitude over that of existing induction machines. The machine is based on the use of high gradient vacuum insulators and advanced dielectric materials and switches. The system, called the Diel ...

Predicting the response of building components to internal detonations is more complex than the corresponding task for external loads because of the more complex loading waveforms which include multiple reflections in the shock phase followed by a long duration pseudostatic loading that depends upon room venting. Add the possibility of additional impulsive loading from primary debris. We propose t ...

In Phase I of this effort we analyzed the structural response of a BLU 109 during typical penetration events. Based on these finite element results, we proposed and demsonstrated a simple robust concept for a passive penetrator sensor that identifies the material being penetrated and also correlates strongly with its underground trajectory. Such a sensor would obviously provide valuable informatio ...

We have previously reported a simple method to detect viable Cryptosporidium parvum oocysts in drinking water using the isothermic Nucleic Acid Sequence Based Amplification (NASBA) method, coupled with a rapid liposme nanovesicle (Nanozome)-based biosensor technology. This assay system is based upon the ability to immunocapture low numbers (i.e., five or more) oocysts and heat shock them to induc ...

The objective of this research is to develop beta versions of tools for automatically migrating radiation effects predicted in TCAD level tools to compact modeling tools. This transition will enable compact models that possess radiation effects to be quickly generated, which can then be used in circuit design activity. This approach is a substantial improvement over the current ad hoc approaches. ...

The atmospheric transport and dispersion (ATD) model requirements for describing the environmental conditions that are most likely to occur on any given day, called the "typical day", are very unique. The model requirements are unique because the typical day requirements for ATD must be both typical in representing the most likely occurring condition of each variable and be mass-balanced across t ...

We hypothesize that lightweight infrared (IR) and video cameras mounted on a unmanned tethered helium balloon and accessed via a wireless network can remotely sense water quality at site scales. We will demonstrate the technical feasibility of a ground based network to monitor and control balloon mounted IP-enabled wireless IR and video cameras for measurement of the spatial distribution of surfa ...