You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Precision Guided Aerial Delivery of Intelligent Ground Based Munitions and Sensors

    SBC: STARA Technologies, Inc.            Topic: A07046

    The ability to accurately and covertly deliver light weight payloads from small aircraft redefines the way the US DOD performs air drop operations. The ability to emplace intelligent smart munitions, leaflets or light weight resupply bundles has bever been done before. Through this SBIR STARA will enhance its proven Mosquito 2 guided parachute system to create a dynamic, scalable guided parachut ...

    SBIR Phase II 2008 Department of DefenseArmy
  2. Laser Peening for Army Vehicle Life Extension

    SBC: LSP Technologies, Inc.            Topic: A02041

    The U.S. Army is evaluating laser peening technology in support of major helicopter programs, including the AH-64 Apache, UH-60 Black Hawk, and CH-47 Chinook fleets. The Army has a critical need to boost the engine horsepower for these helicopters, especially when operating in high altitude theaters such as Iraq and Afghanistan. Laser peening offers a method of increasing the fatigue performanc ...

    SBIR Phase II 2008 Department of DefenseArmy
  3. Low-Cost Miniature Control Actuation System for Gun-Fired Munitions

    SBC: ORBITAL RESEARCH INC            Topic: A06050

    Orbital Research Inc. proposes to design and develop an innovative, low-cost Miniature Control Actuator System (MCAS) for active aerodynamic control of Army's next-generation smart munitions. The MCAS will employ miniature flow control actuators and advanced control strategies to provide in-flight course-correction capability for Army’s line-of-sight (LOS) and beyond line-of-sight (BLOS) munitio ...

    SBIR Phase II 2008 Department of DefenseArmy
  4. 3D Building Visualization Tool for Incident Commanders

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: HSB062005

    In this proposal, Kutta capitalizes on existing DOD investments and its own 2D and 3D visualization tools, and leverages the world-renowned computer graphics department at Arizona State University (ASU). This prior work experience and knowledge allows the team to build a resource and asset tracking tool for incident commanders with powerful 2D and 3D visualization capabilities. Kutta and its prest ...

    STTR Phase II 2008 Department of Homeland Security
  5. Flexible Electronics for Rugged, Low Power Army Systems

    SBC: VERSATILIS LLC            Topic: A06061

    Performance of silicon thin film transistors (TFTs) made with low temperature processes ( 300°C on glass or metal foil substrates, this is still too high for traditional plastic substrates. In Phase I, Versatilis successfully showed the feasibility of using Zinc Oxide (ZnO) as an alternative to Silicon for the active semiconductor channel in such TFT arrays. ZnO is readily available and cheap, a ...

    SBIR Phase II 2008 Department of DefenseArmy
  6. Rapid Computational Fluid Dynamics (CFD) Methodology for Rotorcraft Maneuver Analysis

    SBC: Sukra Helitek Inc.            Topic: A06009

    The lack of proper estimation of air loads encountered during transient maneuvers introduces excessive design conservatism. A reduced fidelity CFD methodology based on momentum source (Rot3DC) and a comprehensive analysis code (RCAS) were coupled in Phase I to validate the ``proof-of-concept'' that such system is capable of rapidly analyzing steady and transient maneuvers. The tightly coupled sys ...

    SBIR Phase II 2008 Department of DefenseArmy
  7. FABRICATION OF HIGH ASPECT RATIO Cu AND BRASS NANOFLAKES FOR IR OBSCURANT APPLICATIONS

    SBC: SIGMA TECHNOLOGIES INTERNATIONAL GROUP, INC.            Topic: A07121

    The US Army is seeking to develop an IR obscurant material for military operations and high aspect ratio, conductive, metallic nanoflake (HANF) is under consideration. Conductive nanoflakes have been demonstrated to be excellent screeners of IR when used in advanced countermeasure devices such as smoke grenades or smoke pots. The primary objective of the Phase II effort is to further develop and ...

    SBIR Phase II 2008 Department of DefenseArmy
  8. CFD Toolkit for Modeling Parachutists in Freefall

    SBC: CREARE LLC            Topic: A07182

    A recent increase in the occurrence of pilot parachute deployment hesitation events during training has focused attention on the flow field about parachutists in freefall. An improved understanding of this flow will contribute to better equipment and improved safety. Computational Fluid Dynamics (CFD) analysis is a powerful technique for exploring such flows. Once validated against experimental d ...

    SBIR Phase II 2008 Department of DefenseArmy
  9. Field-deployable source of Carbon Dioxide for use in Vector Surveillance

    SBC: CUBE Technology            Topic: A07152

    CUBE Technology has created an extremely compact and efficient enclosed combustor dubbed a Micro-Furnace that have demonstrated an unprecedented operating range. They operate on fuels from hydrogen to alcohol to JP-8. This Micro-Furnace combustor is fast-starting and burns less than 200gm of JP-8 fuel to deliver 400cc/minute of CO2 Mosquito attractant over 12 hours. In addition, this system inc ...

    SBIR Phase II 2008 Department of DefenseArmy
  10. Automated Identification Technology System (AIT) to Identify, Track and Monitor the Condition of Medical Supply Items from Point of Origin to End User

    SBC: Eigent Technologies, Inc.            Topic: A07144

    At the present time there is no system to monitor the progress of medical shipments to and within the combat theater other than those pallets that are tagged with Radio Frequency Identification (RFID) tags in compliance with the current DoD mandate for tagging pallets and cases. Full implementation of the DoD mandate to tag all pallets and cases of Class VIII (Medical) materiel is not expected to ...

    SBIR Phase II 2008 Department of DefenseArmy
US Flag An Official Website of the United States Government