You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Distributed Intelligent Swarm Control & Utilization System (DISCUS): Further Maturation and Demonstration
SBC: SCIENTIFIC SYSTEMS CO INC Topic: T4DISCUS is a generic Guidance, Navigation and Control (GNC) system for swarms of SmallSats. It integrates communications and relative localization with innovative Density Control Algorithms (DCA) enabling robust operation in a variety of uncertain environments. As such, it presents a key enabling technology for future Deep Space missions including space apertures at Lagrangian points, and orbiting ...
STTR Phase II 2018 National Aeronautics and Space Administration -
An eddy covariance system for simultaneous flux measurements of total reactive nitrogen, ammonia, and nitrogen oxides (NOx).
SBC: AERODYNE RESEARCH INC Topic: 84SummaryNitrogen balance plays a critical role in agricultural food security and biodiversity. While some nitrogen addition, such as fertilization, is highly beneficial to agriculture, too much can result in lower crop yields and plant loss. Air pollution can tip the nitrogen balance toward unhealthy soil and poor growing conditions and affect a plant's ability to cope with drought. Understandi ...
SBIR Phase II 2018 Department of Agriculture -
Biobased BPA-Free Epoxy Coatings for Food and Beverage Applications
SBC: VURONYX TECHNOLOGIES LLC Topic: 88In this Phase II SBIR project, Vuronyx Technologies will investigatehigh performance BPA free epoxy coatings for food and beverage cans.Canning of foods and beverages in metal containers is extensively used for food preservation and storage. The protective coating applied on the inside surface of the food/beverage container should be safe for food contact, have excellent adhesion to the substrate, ...
SBIR Phase II 2018 Department of Agriculture -
Automated Fiber Placement of Thin-Ply Composite Materials for Large Aerospace Structures
SBC: NEXTGEN MATERIALS & PROCESSING LLC Topic: T12Leveraging their prior experience working with automated fiber placement (AFP) of thin-ply composite materials, NextGen Materials & Processing LLC and the University of Massachusetts Lowell will utilize a Design of Experiments approach, combined with analytical modeling, to identify the critical material, slitting, spooling, and AFP parameters that influence the repeatable, high quality laydown of ...
STTR Phase I 2018 National Aeronautics and Space Administration -
Regeneratively Cooled Ceramic Matrix Composite Nozzle Assembly for Reduced Weight
SBC: PHYSICAL SCIENCES INC. Topic: T9All rocket missions benefit from having lower structural mass and higher specific impulse, both of which contribute to larger payload fractions and therefore lower mission cost. High temperature materials such as ceramic matrix composites (CMCs) are an avenue to lower engine mass because of the low density and high specific strength of the material. They also have a high maximum temperature and so ...
STTR Phase I 2018 National Aeronautics and Space Administration -
Project Patchwork- Wirelessly Networked Structural Analysis Devices for Aircraft
SBC: Mide Technology Corporation Topic: A2Through this SBIR effort, NASA is looking for innovative technology to bolster its flight research capabilities. Particularly, NASA seeks the development of innovative measurement and data acquisition approaches. Mide through a past RIF BAA for Navair, developed a stand-alone high performance data logger for vibration/acceleration, pressure, and temperature. The device, dubbed the Slamstick X, w ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Bi2212 Superconductors for High-Power Density Motors for Aero Propulsion
SBC: SOLID MATERIAL SOLUTIONS LLC Topic: A1Future hybrid aircraft, such as NASA’s N3-X plan, will require all-superconducting electric motors and generators in order to achieve power density in excess of 10 kW/kg. Unlike the DC rotor, the stator must operate in AC mode, for example, from 0-0.5 T at 120 Hz, making it impossible to use high temperature superconducting (HTS) tapes due to their high losses in transient fields, requiring in ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Electrochromic Laminates For Advanced Spacesuit Visors
SBC: GINER INC Topic: H4NASA's Extravehicular Mobility Unit, or EMU, is a personal mini-spacecraft that comprises the space suit assembly and life support systems. The current EMU has a manually operated extravehicular visor assembly (EVVA) that provides protection from micrometeoroids and from solar ultraviolet and infrared radiation. For the integration of EVVA with NASA’s next generation space suits helmet bubbl ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Dehydration Resistant And Dimensionally Stable High Performance Membrane
SBC: GINER INC Topic: H1In several technologies within NASA’s In Situ Resource Utilization (ISRU) systems, such as fuel cell, water electrolysis and gas/water separations etc., polymeric membranes, especially proton exchange membranes (PEM), play an important role. These membranes are generally hygroscopic, subject to swelling in the presence of humidity or water. When restrained membranes undergo a hydration/dehydrati ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Data Logger for Measuring Body Dynamics in Spaceflight Environment (MBISE)
SBC: Mide Technology Corporation Topic: H12During dynamic events such as launch, ascent abort, atmospheric reentry, descent, and landing, crewmembers will experience significant inertial and vibrational loading. To this date, data has not been collected in flight. There is particular interest in the chest, neck, and head region, which are exceptionally sensitive areas. Quantifying the loading on the crewmembers will allow refined simula ...
SBIR Phase I 2018 National Aeronautics and Space Administration