You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Block Copolymer Membranes for Total Removal of Ionic and Nonionic PFAS from Industrial Wastewaters Optionally Co-Contaminated by Alcohols

    SBC: ANFIRO, INC.            Topic: 18NCER1C

    The EPA aims to reduce the total concentration of PFAS in industrial wastewater to

    SBIR Phase I 2019 Environmental Protection Agency
  2. Trajectory Simulation using PSM

    SBC: Triton Systems, Inc.            Topic: MDA17T002

    Triton Systems, Inc. proposes to develop a method for efficiently running federated simulations of atmospheric and orbital rocket flight. Tritons proposed method will be able to get information between time steps without the need for interpolation and will significantly reduce the computational time needed to run Federated simulations.Approved for Public Release | 18-MDA-9522 (23 Feb 18)

    STTR Phase I 2018 Department of DefenseMissile Defense Agency
  3. Predictive Adaptable Logger (PAL)

    SBC: Charles River Analytics, Inc.            Topic: MDA17003

    Large federated simulations are inherently complex to design and execute effectively to meet experiment objectives. When running a series of computationally expensive simulations, simulation engineers need to quickly analyze critical events of interest (e.g., time of detection) without being inundated with GBs of irrelevant data. Unfortunately, many critical events are sporadic, so to ensure that ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  4. Intelligent Dynamic Data Logging

    SBC: FISHEYE SOFTWARE, INC.            Topic: MDA17003

    Data logging of complex simulations can easily overwhelm computer resources or risk losing critical data. Knowing what data is most relevant while simultaneously minimizing collection resources, is extremely challenging.Intelligent Dynamic Data Logging (IDDL) senses run-time data volume, considers scenario objectives, and monitors system performance to record only the most relevant data. It maximi ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  5. Transparent Silicone Carbide Seeker Windows

    SBC: Radiation Monitoring Devices, Inc.            Topic: MDA17005

    Missile seekers are precision guided munitions that are a key element of modern defense systems.Seekers using laser guidance or imaging require IR-transparent protective windows domes.One of the most challenging applications is in endo-atmospheric interceptors. The ultimate achievable performance of missile seekers under such extreme conditions is limited by the available infrared window materials ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  6. Endo-atmospheric Electro-Optical/Infrared Seeker Windows

    SBC: CERANOVA CORPORATION            Topic: MDA17005

    CeraNova conformal spinel windows that will provide enhanced performance over traditional, flat sapphire windows.Conformal spinel windows will maintain the curvature of the nose cone and will thus eliminate aerodynamic hot spots caused by flat surfaces.CeraNovas transparent ceramics and experience in manufacturing conformal optics will be leveraged to enable design and fabrication of a conformal w ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  7. Advanced High-g Accelerometers in Small Form Factor for Inertial Measurement Unit Applications

    SBC: International FemtoScience, Inc.            Topic: MDA17007

    International FemtoScience will develop and demonstrate a new technology to achieve an advanced accelerometer that enhances an Inertial Measurement Units high-g operability. This accelerometer provides smaller, lighter, more robust, less expensive devices, compatible with known production methodologies. To achieve the required performance a novel material, deposited diamond, (not silicon-based, to ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  8. 3D Printed Microscale Radiation Shield for Microelectronics

    SBC: Triton Systems, Inc.            Topic: MDA17012

    The purpose of this proposal is to develop an additive manufacturing process capable of printing radiation blocking material around a microelectronic component. The goal of the radiation shield is to mitigate single event effects from a linear energy transfer (LET) > 20 [MeV-cm2]/mg particle and reduce radiation dose rate by 25%. During Phase I, Triton Systems proposes to prove the feasibility of ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  9. Techniques for Real-time Hypervelocity Projectile fly-out Generation and Optimization

    SBC: Vadum, Inc.            Topic: MDA18002

    Vadum will develop an algorithm to generate and optimize Hypervelocity Projectile (HVP) trajectories as both an analysis and tactical battle management tool.The Optimal Advanced HVP Trajectory System (OATHS) will respond to threat track updates as they are received from upstream processing elements and will be capable of optimizing trajectories for a variety of different threat types with differen ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  10. Wide bandgap SiC based field effect transistor for radiation hard microelectronics

    SBC: Radiation Monitoring Devices, Inc.            Topic: MDA18007

    The goal of this project is to develop basic semiconductor components (field-effect transistors) that can be deployed in highly radioactive environments, such as nuclear plants, space, radioactive waste storage facilities. Ionizing radiation often has a detrimental influence on the performance of microelectronics components. We propose to develop a prototype microelectronics technology for use in ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government