You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. In Vehicle Collision Warning System

    SBC: Elliott Tech LLC            Topic: N/A

    This SBIR Phase I proposal to FHWA requests support for Elliott Technologies, Inc. to demonstrate the feasibility of using a handheld device or a single board computer to verify a simple interface between a user and simulated Safety Warning System messages, Simulated dedicated short range communications, and simulated High accuracy nationwide differential GPS. The significance of this proposal wi ...

    SBIR Phase I 2005 Department of Transportation
  2. Fiberoptic Diisocyanate Personal Monitoring Device

    SBC: LIGHTLINE TECHNOLOGIES INC            Topic: N/A

    LightLine Technologies proposes to develop a highly sensitive fiberoptic personal monitoirng device similar to a sampling badge, targeted for the simple and conventional measurement of total isocyanate and diisocyanate (I&DCY) airbourne exposure. With verymodest smapling processing (controlled heating) sensing of all types of I&DCYs will be possige and is the ptimary goal of this program. Ths sa ...

    SBIR Phase I 2005 Environmental Protection Agency
  3. Wireless Brake Shoe Force Measurement System

    SBC: Mide Technology Corporation            Topic: N/A

    In line with the DOT's desire to encourage the development of a wireless brake shoe force measurement system, Mide will use its extensive experience on loadcell design, energy power-harvesting and wireless data transmission to develop an accurate system for the self-powered, wireless measurement of brake shoe forces on Railroad freight cars. Piezo or coil/magnet proof mass devices will harvest vi ...

    SBIR Phase I 2005 Department of Transportation
  4. Identification and Sorting of Printed Wiring Boards (PWB) Within an E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: N/A

    Electoronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfill and leaching into the water supply. Due to these concerns e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on either manual hand sorting or differental dens ...

    SBIR Phase I 2005 Environmental Protection Agency
  5. Multiplexed Chemical Sensor for Water Security

    SBC: REAL-TIME ANALYZERS, INCORPORATED            Topic: N/A

    The overall goal of this proposed program (through Phase III) is to provide the EPA with a chemical sensor thatn can be multiplerxed into water distributon systems to provide early warning of poisoned water supples. This will be accomplished by developing surface-enhanced Raman (SER) sensors than can be integrated into water supply systems and coupled to a central Paman analyzer via fiber optics. ...

    SBIR Phase I 2005 Environmental Protection Agency
  6. Wireless Magnetic Workzone System

    SBC: VehicleSense Inc.            Topic: N/A

    In this Phase I we will develop a work zone collision system consisting of "smart barrels" and a central communications computer. The "smart barrels" will incorporate magnetic sensors, an LED display, and wireless communications resulting in a unit that can accurately measure the speed of passing vehicles and relay this information to adjacent barrels and the central communications computer. The ...

    SBIR Phase I 2005 Department of Transportation
  7. Fiberoptic Diisocyanate Personal Monitoring Device

    SBC: LIGHTLINE TECHNOLOGIES INC            Topic: 04NCERD2

    LightLine Technologies, Inc., plans to develop a highly sensitive fiber optic personal monitoring device, similar to a sampling badge, targeted for the simple and convenient measurement of total isocyanate and diisocyanate (I&DCY) airborne exposure. With very modest sampling processing (controlled heating), sensing of all types of I&DCYs will be possible and is the primary goal of this research pr ...

    SBIR Phase I 2005 Environmental Protection Agency
  8. Identification and Sorting of Printed Wiring Boards (PWB) Within An E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: 04NCERG1

    Electronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfills and leaching into the water supply. Because of these concerns, e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on manual hand sorting or differential density ...

    SBIR Phase I 2005 Environmental Protection Agency
  9. Multiplexed Chemical Sensor for Water Security

    SBC: REAL-TIME ANALYZERS, INCORPORATED            Topic: 04NCERI1

    The goal of this research project (through Phase III) is to develop a chemical sensor that can be multiplexed into water distribution systems to provide early warning of poisoned water supplies. This will be accomplished by developing surface-enhanced Raman (SER) sensors that can be integrated into water supply systems and coupled to a central Raman analyzer via fiber optics. In Phase I, Real-Time ...

    SBIR Phase I 2005 Environmental Protection Agency
US Flag An Official Website of the United States Government