List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Demonstration of a Continuous, Real-Time PM2.5 Chemical Speciation Monitor Based on an Aerosol Mas Spectrometer

    SBC: Aerodyne Research, Inc.            Topic: N/A

    This Small Business Innovation Research Phase II project addresses the need for improved monitoring technologies for continuous particulate mass and chemical speciation of ambient aerosols. Aerodyne Research, Inc. will develop a prototype Aerosol Chemical Speciation Monitor (ACMS) that measures ambient aerosol mass and chemical composition of non-refractory submicron aerosol particles in real-tim ...

    SBIR Phase II 2005 Environmental Protection Agency
  2. Fiberoptic Diisocyanate Personal Monitoring Device

    SBC: LIGHTLINE TECHNOLOGIES INC            Topic: N/A

    LightLine Technologies proposes to develop a highly sensitive fiberoptic personal monitoirng device similar to a sampling badge, targeted for the simple and conventional measurement of total isocyanate and diisocyanate (I&DCY) airbourne exposure. With verymodest smapling processing (controlled heating) sensing of all types of I&DCYs will be possige and is the ptimary goal of this program. Ths sa ...

    SBIR Phase I 2005 Environmental Protection Agency
  3. Wafer Level Supercritical Carbon Bioxide-Based Metal Depositon for Microelectronic Applications

    SBC: MiCell Technologies, Inc.            Topic: N/A

    This proposal describes the application, development and commercial scale-up of a process successfully developed under EPA contract number EP-D-04-042 for the deposition of copper and copper barrier materials such as ruthenium, titanium and other metals. This process could replace CU electroplating currently used to fill deep trenches and thin film deposition in microelectronic circuit manufactur ...

    SBIR Phase II 2005 Environmental Protection Agency
  4. Identification and Sorting of Printed Wiring Boards (PWB) Within an E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: N/A

    Electoronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfill and leaching into the water supply. Due to these concerns e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on either manual hand sorting or differental dens ...

    SBIR Phase I 2005 Environmental Protection Agency
  5. Multiplexed Chemical Sensor for Water Security

    SBC: REAL-TIME ANALYZERS, INCORPORATED            Topic: N/A

    The overall goal of this proposed program (through Phase III) is to provide the EPA with a chemical sensor thatn can be multiplerxed into water distributon systems to provide early warning of poisoned water supples. This will be accomplished by developing surface-enhanced Raman (SER) sensors than can be integrated into water supply systems and coupled to a central Paman analyzer via fiber optics. ...

    SBIR Phase I 2005 Environmental Protection Agency
  6. Multi-Metal Monitoring System Based Upon Spark-Induced Breakdown Spectroscopy

    SBC: Physical Sciences Inc.            Topic: N/A

    Physical Sciences, Inc. (PSI) proposes to develop a multi-metals emissions monitor to support Title V permitting of large air pollution source based upon its patented spark-induced breakdown spectroscopy (SIBS) technology. Work prior to Phase I has shown that this technique is capable of sensitively monitoring metals in airborne particles that emit in the visible (Pb, Cr, and Cd for example). In ...

    SBIR Phase II 2005 Environmental Protection Agency
  7. Fiberoptic Diisocyanate Personal Monitoring Device

    SBC: LIGHTLINE TECHNOLOGIES INC            Topic: 04NCERD2

    LightLine Technologies, Inc., plans to develop a highly sensitive fiber optic personal monitoring device, similar to a sampling badge, targeted for the simple and convenient measurement of total isocyanate and diisocyanate (I&DCY) airborne exposure. With very modest sampling processing (controlled heating), sensing of all types of I&DCYs will be possible and is the primary goal of this res ...

    SBIR Phase I 2005 Environmental Protection Agency
  8. Identification and Sorting of Printed Wiring Boards (PWB) Within An E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: 04NCERG1

    Electronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfills and leaching into the water supply. Because of these concerns, e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on manual hand sorting or differential density ...

    SBIR Phase I 2005 Environmental Protection Agency
  9. Multiplexed Chemical Sensor for Water Security

    SBC: REAL-TIME ANALYZERS, INCORPORATED            Topic: 04NCERI1

    The goal of this research project (through Phase III) is to develop a chemical sensor that can be multiplexed into water distribution systems to provide early warning of poisoned water supplies. This will be accomplished by developing surface-enhanced Raman (SER) sensors that can be integrated into water supply systems and coupled to a central Raman analyzer via fiber optics. In Phase I, Real-Time ...

    SBIR Phase I 2005 Environmental Protection Agency
  10. Wafer Level Supercritical Carbon Dioxide-Based Metal Deposition for Microelectronic Applications

    SBC: MiCell Technologies, Inc.            Topic: 04NCERP1

    This research project involves the application, development, and commercial scale up of a process for the deposition of copper and copper barrier materials such as ruthenium, titanium, and other metals. This process could replace copper electroplating currently used to fill deep trenches and thin-film deposition in microelectronic circuit manufacturing. In addition, physical vapor depo ...

    SBIR Phase II 2005 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government