You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Novel Metal Shaping Process Using Non-Toxic Working Fluids

    SBC: Faraday Technology, Inc.            Topic: N/A

    This SBIR proposal addresses worker and environmental safety concerns regarding the use of toxic cutting fluids in metal shaping operations. The toxicity of cutting fluids cn be caused by either the constituents fo the cutting fluid chemistyr or in the case of water-soluble emulsions, the toxicity can be caused by biocides intended to control baterial growth. This proposal seeks to adapt an adve ...

    SBIR Phase I 2005 Environmental Protection Agency
  2. Isocyanate-Free Solvent-Free Hybrid Resin System

    SBC: DR. BEN CURATOLO, INC.            Topic: N/A

    This Small Business Innovations Research Phase I project is designed to determine the feasibility of preparing an environmentally friendly isocyanate-free solvent-free hybrid resin system ssuitable fo industrial applications such as automobile refinishing and floor coatings. In particular, the overall objective of this program is to determine the most approptiate ratios or reactive groups of UV c ...

    SBIR Phase I 2005 Environmental Protection Agency
  3. Fiberoptic Diisocyanate Personal Monitoring Device

    SBC: LIGHTLINE TECHNOLOGIES INC            Topic: N/A

    LightLine Technologies proposes to develop a highly sensitive fiberoptic personal monitoirng device similar to a sampling badge, targeted for the simple and conventional measurement of total isocyanate and diisocyanate (I&DCY) airbourne exposure. With verymodest smapling processing (controlled heating) sensing of all types of I&DCYs will be possige and is the ptimary goal of this program. Ths sa ...

    SBIR Phase I 2005 Environmental Protection Agency
  4. Identification and Sorting of Printed Wiring Boards (PWB) Within an E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: N/A

    Electoronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfill and leaching into the water supply. Due to these concerns e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on either manual hand sorting or differental dens ...

    SBIR Phase I 2005 Environmental Protection Agency
  5. Multiplexed Chemical Sensor for Water Security

    SBC: REAL-TIME ANALYZERS, INCORPORATED            Topic: N/A

    The overall goal of this proposed program (through Phase III) is to provide the EPA with a chemical sensor thatn can be multiplerxed into water distributon systems to provide early warning of poisoned water supples. This will be accomplished by developing surface-enhanced Raman (SER) sensors than can be integrated into water supply systems and coupled to a central Paman analyzer via fiber optics. ...

    SBIR Phase I 2005 Environmental Protection Agency
  6. Etchant Recovery System

    SBC: Republic Anode Fabricators, Inc.            Topic: N/A

    Cupric chloride and ammoniacla etchants are used to remove unwanted copper form printed circuit boards. They are used in a continuous"bleed and feed" mode, which leads to the formation of a hazardous copper containing waste. This waste material must be hauled form the site for disposal. In addition, cupric hcloride etchant requires the use of hazardous oxidants such as chlorine gas or sodium ch ...

    SBIR Phase I 2005 Environmental Protection Agency
  7. Novel Metal Shaping Process Using Non-Toxic Working Fluids

    SBC: Faraday Technology, Inc.            Topic: 04NCERA2

    This research project addresses worker and environmental safety concerns regarding the use of toxic cutting fluids in metal shaping operations. The toxicity of cutting fluids can be caused by either the constituents of the cutting fluid chemistry, or in the case of water-soluble emulsions, the biocides intended to control bacterial growth. Faraday Technology, Inc., intends to adapt an advanced ele ...

    SBIR Phase I 2005 Environmental Protection Agency
  8. Fiberoptic Diisocyanate Personal Monitoring Device

    SBC: LIGHTLINE TECHNOLOGIES INC            Topic: 04NCERD2

    LightLine Technologies, Inc., plans to develop a highly sensitive fiber optic personal monitoring device, similar to a sampling badge, targeted for the simple and convenient measurement of total isocyanate and diisocyanate (I&DCY) airborne exposure. With very modest sampling processing (controlled heating), sensing of all types of I&DCYs will be possible and is the primary goal of this research pr ...

    SBIR Phase I 2005 Environmental Protection Agency
  9. Isocyanate-Free Solvent-Free Hybrid Resin System

    SBC: DR. BEN CURATOLO, INC.            Topic: 04NCERD2

    This research project is designed to determine the feasibility of preparing an environmentally friendly isocyanate-free solvent-free hybrid resin system suitable for industrial applications such as automobile refinishing and floor coatings. In particular, the overall objective of this project is to determine the most appropriate ratios of reactive groups for ultraviolet (UV) curable resins to prov ...

    SBIR Phase I 2005 Environmental Protection Agency
  10. Identification and Sorting of Printed Wiring Boards (PWB) Within An E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: 04NCERG1

    Electronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfills and leaching into the water supply. Because of these concerns, e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on manual hand sorting or differential density ...

    SBIR Phase I 2005 Environmental Protection Agency
US Flag An Official Website of the United States Government