Award Data

LightLine Technologies proposes to develop a highly sensitive fiberoptic personal monitoirng device similar to a sampling badge, targeted for the simple and conventional measurement of total isocyanate and diisocyanate (I&DCY) airbourne exposure. With verymodest smapling processing (controlled heating) sensing of all types of I&DCYs will be possige and is the ptimary goal of this program. Ths sa ...

Electoronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfill and leaching into the water supply. Due to these concerns e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on either manual hand sorting or differental dens ...

The overall goal of this proposed program (through Phase III) is to provide the EPA with a chemical sensor thatn can be multiplerxed into water distributon systems to provide early warning of poisoned water supples. This will be accomplished by developing surface-enhanced Raman (SER) sensors than can be integrated into water supply systems and coupled to a central Paman analyzer via fiber optics. ...

LightLine Technologies, Inc., plans to develop a highly sensitive fiber optic personal monitoring device, similar to a sampling badge, targeted for the simple and convenient measurement of total isocyanate and diisocyanate (I&DCY) airborne exposure. With very modest sampling processing (controlled heating), sensing of all types of I&DCYs will be possible and is the primary goal of this research pr ...

Electronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfills and leaching into the water supply. Because of these concerns, e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on manual hand sorting or differential density ...

The goal of this research project (through Phase III) is to develop a chemical sensor that can be multiplexed into water distribution systems to provide early warning of poisoned water supplies. This will be accomplished by developing surface-enhanced Raman (SER) sensors that can be integrated into water supply systems and coupled to a central Raman analyzer via fiber optics. In Phase I, Real-Time ...

This Small Business Innovation Research Phase II project addresses the need for improved monitoring technologies for continuous particulate mass and chemical speciation of ambient aerosols. Aerodyne Research, Inc. will develop a prototype Aerosol Chemical Speciation Monitor (ACMS) that measures ambient aerosol mass and chemical composition of non-refractory submicron aerosol particles in real-tim ...

The goal of this Phase I research project is to investigate the feasibility and commercial potential of using the One Atmosphere Uniform Glow Discharge Plasma (OAUGDPTM) as a low-temperature sterilization process for medical equipment. Current sterilization technologies that pose a risk to health care workers and the environment are being phased out of use (e.g., ethylene oxide sterilization). T ...

The goal of this Phase I research project is to develop a novel MicroElectroMechanical Systems-based sensor capable of detecting low levels of biotoxins in drinking water. An automated detection system based on this technology will fulfill a critical need in homeland security threat management. Central to the proposed sensing approach is a resonating microstructure optimized for sensitive system ...

When sewer exfiltration leaks into the environment, the entry of fecal bacteria into groundwater and surface water increases health risks. Leaking sewers also are suspected sources of fecal contamination in many surface waters designated for total maximum daily load (TMDL) plans. Development of TMDL plans has been hindered by the lack of a reliable and cost-effective method to identify fecal con ...