You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Size-Selection Aerosol Characterization Instrument

    SBC: AERODYNE RESEARCH INC            Topic: G

    Problem Statement: In order to obtain energy independence from conventional sources, there is a significant interest in the production of biogas and“green energy” during wastewater treatment. Due to increased emphasis on sustainability and potential for additional revenue streams, utilities are expected to adopt energy production from digester gas in the near future. Although biogas from tr ...

    SBIR Phase I 2012 Environmental Protection Agency
  2. Environmentally-Benign Polytetrafluoroethylene (PTEE) Coating for Mold Release

    SBC: GVD CORP            Topic: C

    GVD proposed to develop high performance, solventless and PFOA-free, non-stick mold release coatings based on its novel PTFE fluoropolymer technology. Most commercial mold release agents make use of organic solvents that when liberated during the drying process may have a significant air quality impact. The drying/curing process may also be energy intensive, requiring additional consumption of f ...

    SBIR Phase I 2012 Environmental Protection Agency
  3. A Non-Toxic Composite Flame Retardant

    SBC: Sunocs, LLC            Topic: C

    Sunocs LLC proposes to develop a non-toxic; low cost nanocomposite flame retardant (FR) that can be used in current building materials including flexible and rigid polyurethane foam, high impact polystyrene, and expandable polystyrene. The innovation of this proposal is to use a non-toxic, larger vaporization heat agent that will form a fuel dilution protective layer which will inhabit and stop t ...

    SBIR Phase I 2012 Environmental Protection Agency
  4. Fiberoptic Diisocyanate Personal Monitoring Device

    SBC: LIGHTLINE TECHNOLOGIES INC            Topic: N/A

    LightLine Technologies proposes to develop a highly sensitive fiberoptic personal monitoirng device similar to a sampling badge, targeted for the simple and conventional measurement of total isocyanate and diisocyanate (I&DCY) airbourne exposure. With verymodest smapling processing (controlled heating) sensing of all types of I&DCYs will be possige and is the ptimary goal of this program. Ths sa ...

    SBIR Phase I 2005 Environmental Protection Agency
  5. Identification and Sorting of Printed Wiring Boards (PWB) Within an E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: N/A

    Electoronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfill and leaching into the water supply. Due to these concerns e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on either manual hand sorting or differental dens ...

    SBIR Phase I 2005 Environmental Protection Agency
  6. Multiplexed Chemical Sensor for Water Security

    SBC: REAL-TIME ANALYZERS INC            Topic: N/A

    The overall goal of this proposed program (through Phase III) is to provide the EPA with a chemical sensor thatn can be multiplerxed into water distributon systems to provide early warning of poisoned water supples. This will be accomplished by developing surface-enhanced Raman (SER) sensors than can be integrated into water supply systems and coupled to a central Paman analyzer via fiber optics. ...

    SBIR Phase I 2005 Environmental Protection Agency
  7. Development of a Novel Virus Capture System Using Positively Charged Silica Matrix

    SBC: SCIENTIFIC METHODS INC            Topic: N/A

    The need for a simple, reliable, efficient, and inexpensive virus capture system is an essential step for detecting viruses, such as adenoviruses, caliciviruses, coxsackieviruses and echoviruses in Contaminant Candidate List 2 (CCL@), in water supplies. The currenly available methods are membrane-based techniques that require preconditioning water samples before filtration or are rather expensive ...

    SBIR Phase I 2005 Environmental Protection Agency
  8. Development of a Novel Virus Capture System Using Positively Charged Silica Matrix

    SBC: SCIENTIFIC METHODS INC            Topic: 04NCERC1

    The need for a simple, reliable, efficient, and inexpensive virus capture system is an essential step for detecting viruses, such as adenoviruses, caliciviruses, coxsackieviruses, and echoviruses on the Contaminant Candidate List 2 and found in water supplies. The currently available methods are membrane-based techniques that require preconditioning water samples before filtration or expensive fi ...

    SBIR Phase I 2005 Environmental Protection Agency
  9. Fiberoptic Diisocyanate Personal Monitoring Device

    SBC: LIGHTLINE TECHNOLOGIES INC            Topic: 04NCERD2

    LightLine Technologies, Inc., plans to develop a highly sensitive fiber optic personal monitoring device, similar to a sampling badge, targeted for the simple and convenient measurement of total isocyanate and diisocyanate (I&DCY) airborne exposure. With very modest sampling processing (controlled heating), sensing of all types of I&DCYs will be possible and is the primary goal of this research pr ...

    SBIR Phase I 2005 Environmental Protection Agency
  10. Identification and Sorting of Printed Wiring Boards (PWB) Within An E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: 04NCERG1

    Electronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfills and leaching into the water supply. Because of these concerns, e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on manual hand sorting or differential density ...

    SBIR Phase I 2005 Environmental Protection Agency
US Flag An Official Website of the United States Government