You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Superconducting Developments for Compact Power and Energy Systems

    SBC: AMERICAN SUPERCONDUCTOR CORPORATION            Topic: OSD04EP6

    In recent years, there have been significant advances in YBCO coated conductor development. AMSC reported achieving electrical performance levels of 330 Amps, 10 percent above the commercial threshold performance level of 300 Amps set by the U.S. Department of Energy (DOE) for 2G HTS wires. Also, high performance reults were reported on greater than 30-m lengths - triple the length of its previo ...

    SBIR Phase I 2004 Department of DefenseAir Force
  2. Nanostructure-Enhanced Bulk Thermoelectric Materials

    SBC: AGILTRON, INC.            Topic: OSD04EP3

    The use of thermoelectric devices as alternative energy sources has been investigated with limited success. Manufacturing costs and limited power generation efficiency have prevented the economical, large-scale production and use of the thermoelectric devices as a viable alternative energy source. Agiltron has proposed an innovative nanostructure-enhanced thermoelectric material that will integrat ...

    SBIR Phase I 2004 Department of DefenseNavy
  3. Novel Nanostructure-Enhanced Approach for Bulk Thermoelectric Materials

    SBC: LUTRONICS            Topic: OSD04EP3

    Lutronics proposes a unique combination of an innovative multiple shallow quantum well concept, a new nano-approach, and a unique bulk material processing method, with which great breakthroughs in thermo-electrical figure-of-merit can be expected. The Phase I was intended for proving the proposed concept. Success of the Phase I research will lay down a solid foundation for the following Phase II r ...

    SBIR Phase I 2004 Department of DefenseNavy
  4. Nanostructure-Enhanced Bulk Thermoelectric Materials

    SBC: Nanolab, Inc            Topic: OSD04EP3

    NanoLab plans to synthesize nanoparticles of Sb2Te3, Bi2Te3,Bi2Se3, silicon and germanium using established and experimental techniques that are applicable to large scale synthesis. We will investigate the rapid consolidation of these nanoparticles to form nanocomposites of Si-Ge, Bi2Te3-Sb2Te3 (p-type) and Bi2Te3-Bi2Se3 (n-type), and test their thermoelectric properties.

    SBIR Phase I 2004 Department of DefenseNavy
  5. High Power Laser-Host Material

    SBC: AGILTRON, INC.            Topic: OSD04L01

    The present invention is a low cost method of mass-producing large size, ultra-fine grain Nd:YAG laser ceramics. Agiltron's approach will potentially lead to a new generation of engineered polycrystalline laser materials exhibiting new performance and cost attributes that are not previously attainable. The proposed technology uses a vacuum hot press sintering process to overcome conventional l ...

    SBIR Phase I 2004 Department of DefenseArmy
  6. Advance Cooling Designs for High Temperature Transformers and Inductors for Power Electronics

    SBC: ADVANCED THERMAL TECHNOLOGIES            Topic: OSD04EP1

    As a result of continuing advances in magnetic materials, compression of circuit physical architecture, increase in magnetic component packaging density and faster switching speed, the heat dissipation rate of next generation military power converter systems will require operation at significantly higher heat flux levels than current power converters. The goal of this SBIR Phase I program is the ...

    SBIR Phase I 2004 Department of DefenseArmy
  7. Innovative Non-pyrotechnic Dispersion Device (INDD)

    SBC: Mide Technology Corporation            Topic: N04169

    Kinetic energy munitions that dispense and disperse pellets prior to impact are effective against threats on the ground or at sea. Typically, explosives or pyrotechnics also contained within the munition are used to impart a lateral velocity to the pellets. Unfortunately, explosives pose a severe injury risk to our military handlers, and impose high shipping costs associated with hazardous mater ...

    SBIR Phase I 2004 Department of DefenseNavy
  8. Monolithic technology for Wafer Scale Phased Arrays

    SBC: OPEL            Topic: SB043047

    Phased arrays are critical for locating and tracking. Current TR modules use multiple MMIC chips, ferrite circulators and quasi-optical true-time-delay (TTD). Chip integration is not possible and interconnecting with GHZ RF outputs is a complicated board problem with little scalability to higher bandwidth, smaller size and lower power. OPEL proposes a monolithic IC solution based upon novel optoe ...

    SBIR Phase I 2004 Department of DefenseDefense Advanced Research Projects Agency
  9. Reactive Tungsten Alloy For Inert Warheads

    SBC: PHYSICAL SCIENCES INC.            Topic: N04168

    Physical Sciences Inc. and ATK Thiokol, Inc. propose to develop novel high-density tungsten-based reactive composites for application to inert kinetic energy munitions. These materials will be inert such that they do not reduce the projectile's Insensitive Munitions compliance. Their critical benefit will be to enhance projectile lethality by depositing a combined kinetic and chemical energy in th ...

    SBIR Phase I 2004 Department of DefenseNavy
  10. Novel Low-cost Methods for Fabricating Compact, Vertically Integrated MEMS

    SBC: SENSORCON, INC.            Topic: SB043036

    Sensorcon is proposing a CMOS compatible method to vertically integrate MEMS devices in a 3D manner, at the wafer level. This method will enable low cost production in both low and high volumes, as the benefits of both SOC and SIP approaches will be realized. The techniques used in this proposal draw upon the state-of-the-art in semiconductor, MEMS, and packaging technologies. Phase I work will ...

    SBIR Phase I 2004 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government