List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Particle Sizing and Identification Through Advanced Light Scatter Techniques

    SBC: Ade Corp.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Commerce
  2. Silicon Carbide UV Photodiode Arrays

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    UV diode detector arrays have a wide range of both commercial and military applications. Examples include spectral measurement and calibration, pollution monitoring, environmental change monitoring, remote sensing of earth resources, solar UV monitoring, burner monitoring in gas turbines, flame detection in furnaces and for fire detections, etc. SiC is one of the most promising material for UV di ...

    SBIR Phase I 1995 Department of Commerce
  3. 3-D Materials Characterization Using Structured Illumination in the SEM

    SBC: Advanced Microscopy Techniques            Topic: N/A

    Microscopic measurement of surface topography is a continuing need in microfabrication technology and materials research. The aim of this research is to adapt the scanning electron microscope (SEM) to the quantitative measurement of a wide range of surface structures. The SEM is a widely used measurement tool in materials science and semiconductor fabrication. The SEM's strength is that it prov ...

    SBIR Phase I 1995 Department of Commerce
  4. A Smart IR Fire Detection System

    SBC: Aerodyne Research, Inc.            Topic: N/A

    Smart IR technology has advanced at a rapid pace over the last two decades, pushed along by primarily defense-related requirements. This includes such breakthroughs as Acousto-Optic Tunable Filters and microbolometer detector arrays. Coupled with the continuing growth in microprocessor power, this promises to make a new generation of fast, cheap and reliable infrared (IR) fire detectors possible ...

    SBIR Phase I 1995 Department of Commerce
  5. Airborne Imaging LIDAR for Biomass Estimation

    SBC: Arete Associates            Topic: N/A

    There is a need for accurate and cost effective airborne techniques to estimate fish biomass in the open ocean. Arete proposes to develop in Phase I optimal detection algorithms using existing imaging LIDAR data collected with the Fisheye(R) sensor. These algorithms will be developed to allow real-time detection of fish and fish schools, discrimination between fish and ambient clutter, and discr ...

    SBIR Phase I 1995 Department of Commerce
  6. Wavelet Image Compression Workbench

    SBC: Aware, Inc.            Topic: N/A

    Digital imagery is an increasingly prevalent in the computerized workplace; however, the increasing volume of this data is stressing storage and communications systems. One of the most competitive solutions to these stresses is wavelet-based data compression. A wide variety of wavelet image compression methods exists, and given an application, there is a need to compare different methods before ...

    SBIR Phase I 1995 Department of Commerce
  7. Advanced Absolute Radiometers Using Superconducting Transition Thermometers

    SBC: CAMBRIDGE RESEARCH AND INSTRUMENTATION            Topic: N/A

    In our Phase 1 work we were able to replicate and build on recent results at NIST with superconducting transition (SCT) thermometers, which suggested that dramatic improvements may be achieved in detectivity and range of application, of cryogenic electrical substitution radiometers. Cryo-ESR's are widely used as the most accurate absolute standards of radiative flux and irradiance. In Phase 2, we ...

    SBIR Phase I 1998 Department of Commerce
  8. STATISTICAL PROCESS CONTROL OF ELECTRICAL PARAMETERS FOR SIMOX SOI

    SBC: IBIS TECHNOLOGY CORP.            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Commerce
  9. An Intelligent Translation Layer for Legacy CIM Applications

    SBC: Information Technologies            Topic: N/A

    During the last two decades, software to support the manufacturing lifecycle has become pervasive. Sophisticated off the shelf packages are available for most standard manufacturing activities such as MRP, inventory control and dynamic scheduling. Unfortunately, most of this software has been developed in isolation by independent vendors and does not interoperate well with other independently de ...

    SBIR Phase I 1995 Department of Commerce
  10. Development of an Ultrasonic System for the Reliable Detection and Sizing of Sustained Load Cracks in Aluminum Cylinders

    SBC: Matec Instruments, Inc.            Topic: N/A

    The feasiblity of developing a PC based, pulsed ultrasonic test system for the economical and reliable testing of aluminum cylinders for sustained load cracking is addressed. A system consisting of a host PC, ultrasonic pulser/receiver and data acquisition hardware, control and analysis software, and transducer fixture for accurate positioning is proposed. In addition to the system development, ...

    SBIR Phase I 1995 Department of Commerce

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government