You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Intelligent Flexible Fixturing System

    SBC: ACT Research Corporation            Topic: N/A

    Two approaches are proposed to attack the problems of fixturing process. First, a novel hardware holding system, Dexterous Vise, is proposed. Functionally, a single Dexterous Vise is capable of revealing four faces of the clamped workpiece to the cutting tool without re-fixturing, which actually increases one degree of freedom to the machine tool. A pair of Dexterous Vises, the "Dual-Vise", ena ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. Smart, Compact Packages for Vibration Control

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Herein, ACX proposes to develop compact, low cost, integrated smart packs for vibration reduction. Each package would include actuators and sensors, drive and signal conditioning electronics as well as simple controllers to yield a self standing solution to vibration problems. The electronics module would be low cost and compact. The pack would run off of standard available power supplies and w ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  3. PIEZOCERAMIC BASED ACTUATOR/SENSOR ARRAYS FOR VIBRATION CONTROL OF MACHINERY

    SBC: Active Control eXperts, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 National Aeronautics and Space Administration
  4. Lattice Matched III-V Nitride Heterostructures

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The III-V nitrides have recently emerged as the primary material system for UV/blue light emitters. Higher bandgap energy (Al,Ga)N alloys are currently employed as cladding layers for GaN and (In,Ga)N active region LEDs and laser structures. Lattice mismatch between the cladding and active regions, however, restricts both the thickness and composition of the layers which in turn limits the operati ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  5. High Temperature SiC Power MOSFETs

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Large power handling systems of 1KW to 150KW are required in a many applications ranging from aerospace to consumer electronics to industrial power systems and transportation. Conventional electronic systems, based on silicon or gallium arsenide devices, require a large number of devices enhanced with extra heat sinking and sophisticated control systems to ensure synchronous operation. The extra ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  6. In-Cylinder Micromachined Pressure Transducers

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Increasingly strict emissions requirements and the need to increase fuel economy and reduce service intervals have dramatically accelerated the use of monitor and control electronics in engines. traditional methods such as adjusting the air/fuel ratio to optimize catalyst performance are not effective enough to meet future requirements. Measurement of the pressure in each cylinder permits enhanc ...

    SBIR Phase I 1996 Department of DefenseArmy
  7. Interconnect Technology for High Temperature SiC Integrated Circuits

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Integration of many different devices on a single silicon carbide (SiC) substrate is necessary to realize the full potential of high temperature or high power devices for markets ranging from industrial and consumer to military systems to transportation power and control. Integration requires that the entire device package, individual devices, contacts and interconnect materials, be ...

    SBIR Phase I 1996 Department of DefenseAir Force
  8. CVD OF SEMI-INSULATING SILICON CARBIDE

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    N/A

    SBIR Phase I 1996 National Aeronautics and Space Administration
  9. SBIR PHASE I: SiC on Insulator for High Frequency Devices

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    N/A

    SBIR Phase I 1996 National Science Foundation
  10. Non-destructive Depth Dependent Stress Monitor

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
US Flag An Official Website of the United States Government