List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. INSTRUMENT FOR MONITORING FINE, RESPIRABLE PARTICULATE MATTER IN FLUE GASES

    SBC: Advanced Fuel Research, Inc.            Topic: N/A

    The flue gases of combustion-type power plants contain small, respirable ash andfume particles which originate from the inorganic species in the fuel. Coalburning power plants, for example, have a notorious reputation for spewing outflue gas particles originating from the mineral mater in the coal. These fluegas particles (10 microns in diameter) must be characterized for two reasons:1) to deter ...

    SBIR Phase I 1995 Environmental Protection Agency
  2. A NITROGEN DIOXIDE MONITOR BASED ON NONDISPERSIVE VISIBLE OPTICAL DETECTION

    SBC: Aerodyne Research, Inc.            Topic: N/A

    The problem addressed in this project is the need to monitor oxides of nitrogen(NOx, ie NO and NO2) levels in the combustion gases of stationary sources suchas power plants in order to facilitate on-line control of the scrubbers that willbe used to remove those pollutants. Since the measurements are in the parts permillion range, simpler and less expensive instruments than those currently used,su ...

    SBIR Phase I 1995 Environmental Protection Agency
  3. AN ADVANCED FLUE GAS MONITOR FOR SO2

    SBC: Giner, Inc.            Topic: N/A

    The development of an instrument for continuously monitoring SO2 levels in fluegas is proposed. The SO2 will be detected by means of an electrochemical sensorcell, which operates in a three-electrode potentiostatic mode. The proposedinnovation is develop-ment of an advance sensor cell which uses a high-temperature solid polymer eleobjectives of the proposed program are 1) identification of poten ...

    SBIR Phase I 1995 Environmental Protection Agency
  4. NOVEL SORBENTS FOR SORPTION AND RECOVERY OF HEAVY METALS FROM WASTEWATER

    SBC: ICET, INC            Topic: N/A

    An efficient method for directly removing chromate and metals such as nickel,zinc, cadmium, mercury, cobalt, chromium(III), lead in two separate stages isproposed. The highly capacity sorbents could be regenerated, recovering thechromate and other metals separately. The regeneration is expected to beefficient and is simply based on changing the pH from one extreme to another.Bench scale characte ...

    SBIR Phase I 1995 Environmental Protection Agency
  5. TRACE HEAVY METAL REMOVAL FROM DRINKING WATER

    SBC: ICET, INC            Topic: N/A

    New ideas are presented on the covalent attachment of chelating functionalitiesto novel, highly hydrophilic sobent material, which can then complex heavy metalions irreversibly and is targeted toward lead removal. The efficient removal ofother heavy metals, such as cadmium, chromium, mercury, zinc, nickel, cobalt, andcooper are anticipated. The covalent attached ligands are expected to be stable ...

    SBIR Phase I 1995 Environmental Protection Agency
  6. PHOTOCATALYTIC AIR POLLUTION CONTROL TECHNOLOGY FOR DILUTE VOC/TAP DESTRUCTION

    SBC: K S E INC            Topic: N/A

    Technology is needed for control of emissions of volatile organic compounds(VOC's) and toxic air pollutants (TAP's) from stationary sources. A particularneed exists for emissions control of industrial processes, where diluteconcentrations of VOC's are present in high flows of offgas which may alsocontain submicron particles.The proposed research project is to establish the technical and economicf ...

    SBIR Phase I 1995 Environmental Protection Agency
  7. METHOD FOR DIRECT CONTINUOUS MONITORING OF PARTICULATE EMISSIONS FROM INDUSTRIAL EFFLUENTS

    SBC: Lsr Technologies Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Environmental Protection Agency
  8. HEAVY METALS EMISSIONS CONTROL BY CO-FIRING MSW AND COAL

    SBC: Physical Sciences Inc.            Topic: N/A

    Incineration of Municipal Solid Wastes (MSW) often results in the emission oftoxic heavy metals, such as lead and cadmium. Previous work has demonstrated theability of some aluminosilicates sorbents, including common coal-borne minerals,to capture lead and cadmium vapors and, thereby, prevent their emission. Leadand cadmium capture by such sorbents have been shown to be non-leachable. PSITechno ...

    SBIR Phase I 1995 Environmental Protection Agency
  9. ON-LINE PRODUCTION OF OXIDANT FOR UV OXIDATION PROCESSES

    SBC: Uv Technologies Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Environmental Protection Agency
  10. MODIFICATION

    SBC: Eng, Inc.            Topic: N/A

    RECENT PROMISING DEVELOPMENTS IN THE PETROLEUM INDUSTRY "PROFILE MODIFICATION TECHNOLOGY" (PMT) WILL BE EVALUATED FOR THEIR APPLICATION TO LEAKING LANDFILL SITES. PROFILE FLOW MODIFICATION TREATMENTS ARE USED TO INCREASE FLOW RESISTANCE IN HIGH PERMEABILITY AREAS FAR (75 FEET TO AS MUCH AS 1000 FEET) FROM THE INJECTION WELLBORE. THESE TREATMENTS CAN WITHSTAND FORMATION PRESSURES AND TEMPERATURES U ...

    SBIR Phase I 1985 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government