List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. THIS PROPOSAL ADDRESSES THE POSSIBILITY OF UTILIZING COMMERCIALLY-AVAILABLE LETTER-QUALITY OR DOT-MATRIX PRINTERSFOR BRAILLE OUTPUT WHEN USED WITH A MICROCOMPUTER.

    SBC: Duffy Engineering            Topic: N/A

    THIS PROPOSAL ADDRESSES THE POSSIBILITY OF UTILIZING COMMERCIALLY-AVAILABLE LETTER-QUALITY OR DOT-MATRIX PRINTERSFOR BRAILLE OUTPUT WHEN USED WITH A MICROCOMPUTER. THE BRAILLE-OUTPUT ENVISIONED WOULD BE GRADE I BRABRAILLE SINCE GRADE II WOULD NORMALLY REQUIRE TRANSCRIPTION BY AN EX AN EXPERIENCED BRAILLIST. THIS CONCEPT IS INTENDED TO PROVIDE AN INEXPENSIVE, AUTOMATED, AND RAPID SYSTEM OF BRAILLE- ...

    SBIR Phase I 1985 Department of Education
  2. INDIVIDUALIZED INTERACTIVE VIDEO

    SBC: Duffy Engineering            Topic: N/A

    PROVIDING INDIVIDUALIZED INSTRUCTION FOR DISABLED STUDENTS IN SPECIAL EDUCATION PLACEMENTS IS A TIME-CONSUMING PROCESS FOR EDUCATORS AND THUS COSTLY. COMPUTERIZED AND INTERACTIVEVIDEODISK EDUCATIONAL FORMATS MAY NOT BE READILY CUSTOMIZED FOR THE INDIVIDUAL STUDENT. HOWEVER, COMMONLY-AVAILABLE IN PERSONAL COMPUTERS AND HAND-HELD CAMCORDERS ARE TOOLS AVAIL ABLE IN MOST SCHOOLS. IF A PERSONAL COMPUTE ...

    SBIR Phase I 1988 Department of Education
  3. EDUCATING INFORMED CONSUMERS: A NATIONAL SURVEY OF FAMILIESKNOWLEDGE CONCERNING RESPITE SERVICES

    SBC: Human Services Res Inst            Topic: N/A

    THIS PROJECT IS BASED ON THE PREMISE THAT PRIMARY CARE- GIVERS SHOULD PLAY A MAJOR ROLE IN DESIGNING, MANAGING, AND MONITORING SERVICES WHICH SUPPORT CHILDREN WITH DISABILITIESAND THEIR FAMILIES. RESPITE SERVICES OFFERS BUT ONE FORUM FROM WHICH THEY CAN EXERCISE THESE ROLES. THROUGH THE USE OF AN ADVISORY BOARD, MADE UP LARGELY OF PRIMARY CARE GIVERSAND A NATIONAL SURVEY THIS PROJECT SEEKS TO DETE ...

    SBIR Phase I 1988 Department of Education
  4. WITH MICROCOMPUTERS

    SBC: INNOVATIVE SOLUTIONS INTERNATIONAL            Topic: N/A

    RECENT ADVANCES IN MICROCOMPUTER TECHNOLOGY HAVE MADE IT POSSIBLE FOR VISUALLY IMPAIRED PERSONS TO CONTINUE NORMALLY WITH THEIR EDUCATION. VOICE SYNTHESIZERS AND TEXT MAGNIFI CATION ENABLE HANDICAPPED INDIVIDUALS TO BEAR RO READ BOOKS,MAGAZINES, AND OTHER PUBLICATIONS WHICH ARE STORED IN D N DIGITAL FROM IN THE MICROCOMPUTER. THE RECENT INTRODUCTION OF A LOW COST, MANUALLY OPERATED, OPTICAL SCANNE ...

    SBIR Phase I 1985 Department of Education
  5. RAMAN COVERTED MID-IR LASER

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase I 1985 Department of DefenseArmy
  6. ONE-WAY DOPPLER MEASUREMENT

    SBC: ADCOM SYSTEMS TECHNOLOGY,INC.            Topic: N/A

    INNOVATIVE APPROACHES ARE DESCRIBED IN THIS PROPOSAL FOR SUPPRESSING FREQUENCY MODULATION ON A SINUSOIDAL CARRIER. PARTICULAR EMPHASIS IS DIRECTED TO THE SUPPRESSION OF IDENTIFIABLE COMPONENTS OF A COMPOSITE MODULATION PROCESS FOR THE PURPOSE OF RETAINING, FOR SEPARATE MEASUREMENT, ANY FORM OF RANGE-RATE DOPPLER SHIFT/MODULATION PRESENT. THE PROPOSED EFFORT WILL CONSIST OF AN ANALYTICAL STUDY FOR ...

    SBIR Phase I 1988 Department of DefenseArmy
  7. INTERMETALLIC COMPOSITES

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    INTERMETALLIC COMPOUNDS ARE KNOWN FOR THEIR HIGH MELTING POINTS AND CORROSION AND OXIDATION RESISTANCE. MANY OF THESE COMPOUNDS HAVE LOW DENSITIES AND VERY HIGH STRENGTHS AND, THEREFORE, ARE OF INTEREST FOR HIGH TEMPERATURE AEROSPACE AND SPACE STRUCTURE APPLICATIONS. HOWEVER,CONVENTIONAL PROCESSING OF INTERMETALLIC COMPOUNDS SUFFERS SEVERE LIMITATIONS: REACTIONS WITH CONTAINERS, POROSITY, CONTAMIN ...

    SBIR Phase I 1988 Department of DefenseDefense Advanced Research Projects Agency
  8. MANUFACTURING METHOD FOR ALUMINUM COATED GLASS FIBERS

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    ALUMINUM COATED GLASS FIBERS HAVE FOUND BROAD BASED USE AS RADAR CHAFF, HOWEVER, EXISTING METHODS OF MANUFACTURE ARE GENERALLY HIGH COST AND DO NOT OPTIMIZE ADHESION BETWEEN METAL AND GLASS WHICH MAY LEAD TO PERFORMANCE LOSS DURING HANDLING OR PROCESSING. BY UTILIZING A HIGH SPEED, LOW CAPITAL COST PROCESS SUCH AS CHEMICAL VAPOR DEPOSITION (CVD) IN COMBINATION WITH NOVEL INTERLAYER TECHNOLOGY, A P ...

    SBIR Phase I 1988 Department of DefenseAir Force
  9. METALORGANIC MOLECULAR BEAM EPITAXY

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseMissile Defense Agency
  10. FLAMMABILITY SMOKE AND TOXICITY CHARACTERIZATION OF THERMOPLASTIC COMPOSITE MATERIALS FOR SUBMARINE USE

    SBC: Advanced Composite Products            Topic: N/A

    THE OBJECTIVE OF THIS EFFORT IS TO ASSESS LIGHTWEIGHT STRUCTURAL COMPOSITE MATERIALS WITH GREATLY IMPROVED FLAMMABILITY, SMOKE GENERATION, AND TOXIC FUME GENERATION (FST) PROPERTIES FOR USE IN NAVY INTERNAL SUBMARINE APPLICATIONS. THE MATERIALS TO BE EVALUATED CONSIST OF GLASS REINFORCING FIBERS BLENDED IN A THERMOPLASTIC MATRIX WITH PRECISE FIBER/RESIN VOLUME FRACTION CONTROL. THE THERMOPLASTIC ( ...

    SBIR Phase I 1988 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government