Award Data

Purpose: The need for all students to be well prepared in science has been well documented. The purpose of this project is to develop a solar learning lab platform to apply learning in the area of energy science. Project Activities: The researchers will design curricula materials, multi-media video clips, lesson plans, student activities, assessments, and a back-end system to house data generated ...

Not Available Virtually every user of launch services is seeking methods to reduce launch costs. A reusable conventional launch vehicle configuration shows the potential to achieve this goal. The LOX/LNG propellant combination shows the potential to enhance both propulsion system reusability and launch system mass-to-orbit capability. This propellant combination also has the performance margins n ...

Not Available The objective of the proposed effort is to determine the feasibility of squeezing a large schematic or diagram image onto a small physical display using a high-resolution area-of-interest in conjunction with warping of the remaining imagery. The resulting, hybrid image can then be viewed by maintenance personnel as they perform their tasks using portable computers. The specification ...

Not Available An advanced ceramic matrix composite (CMC) system will be used to develop concepts for a lightweight and economical thermal protection system for hypersonic air vehicles. The concept will be based on COI's oxide-oxide CMC that has been shown to retain its structure properties at extreme temperatures. The low cost manufacturing approach and its inherent resistance to environmental ex ...

Not Available The development of advanced communication or electronic warfare systems requires high performance miniaturized microwave filters. Miniaturized high-Q evanescent (EV) is one of the most desirable filters due to its wide stopband and small size, especially for satellite down-converter applications where a few hundred EV filters are used. Currently, EV filters are made using very small ...

PROVIDING INDIVIDUALIZED INSTRUCTION FOR DISABLED STUDENTS IN SPECIAL EDUCATION PLACEMENTS IS A TIME-CONSUMING PROCESS FOR EDUCATORS AND THUS COSTLY. COMPUTERIZED AND INTERACTIVEVIDEODISK EDUCATIONAL FORMATS MAY NOT BE READILY CUSTOMIZED FOR THE INDIVIDUAL STUDENT. HOWEVER, COMMONLY-AVAILABLE IN PERSONAL COMPUTERS AND HAND-HELD CAMCORDERS ARE TOOLS AVAIL ABLE IN MOST SCHOOLS. IF A PERSONAL COMPUTE ...

THIS PROJECT IS BASED ON THE PREMISE THAT PRIMARY CARE- GIVERS SHOULD PLAY A MAJOR ROLE IN DESIGNING, MANAGING, AND MONITORING SERVICES WHICH SUPPORT CHILDREN WITH DISABILITIESAND THEIR FAMILIES. RESPITE SERVICES OFFERS BUT ONE FORUM FROM WHICH THEY CAN EXERCISE THESE ROLES. THROUGH THE USE OF AN ADVISORY BOARD, MADE UP LARGELY OF PRIMARY CARE GIVERSAND A NATIONAL SURVEY THIS PROJECT SEEKS TO DETE ...

THIS PROPOSAL ADDRESSES THE POSSIBILITY OF UTILIZING COMMERCIALLY-AVAILABLE LETTER-QUALITY OR DOT-MATRIX PRINTERSFOR BRAILLE OUTPUT WHEN USED WITH A MICROCOMPUTER. THE BRAILLE-OUTPUT ENVISIONED WOULD BE GRADE I BRABRAILLE SINCE GRADE II WOULD NORMALLY REQUIRE TRANSCRIPTION BY AN EX AN EXPERIENCED BRAILLIST. THIS CONCEPT IS INTENDED TO PROVIDE AN INEXPENSIVE, AUTOMATED, AND RAPID SYSTEM OF BRAILLE- ...