For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Inexpensive Formaldehyde Sensor for Indoor Air Quality Application

    SBC: Giner, Inc.            Topic: 16NCER1A

    Formaldehyde is a reactive and flammable aldehyde which is well known as one of the harmful volatile organic compounds. A_x000D_ combination of respiratory disease, allergic dermatitis and other ailments so called Sick Building Syndrome (SBS) is associated with chronic exposure to formaldehyde. Therefore, monitoring for formaldehyde is important in residential buildings. In this Phase I_x000D_ dev ...

    SBIR Phase I 2017 Environmental Protection Agency
  2. An Inexpensive Hand-Held Monitor for Measuring Fugitive Methane Emissions


    Methane is the second most prevalent greenhouse gas emitted after carbon dioxide, however, on a pound-to-pound comparison methane has a 25 times greater impact on climate change than carbon dioxide over a 100-year period. Accordingly, the 2014 Climate Action Plan signed by President Obama has directed agencies including the USDA, DOE, and EPA to reduce methane emissions. A significant effort in th ...

    SBIR Phase I 2017 Environmental Protection Agency
  3. Nanostructured Carbon Based Capacitive Desalination


    Capacitive deionization (CDI) is a robust, energy efficient, and cost effective technology for water desalination. In collaboration with Dr. Satish Kumar and Dr. Costas Tsouris at Georgia Tech, we are developing nanostructured carbon material for effective and economical water and wastewater desalination. Our new approach for CDI is enabled by (1) synthesis of nanostructured high surface area acti ...

    SBIR Phase I 2017 Environmental Protection Agency
  4. Remote Sensing Instrument for On-Road Heavy-Duty Diesel NOx and PM Emissions

    SBC: Aerodyne Research, Inc.            Topic: N/A


    SBIR Phase I 2001 Environmental Protection Agency
  5. Portable Engine Emission Analyzer

    SBC: BOSTON MICROSYSTEMS INC            Topic: N/A

    A strategic need exists for harsh-environment, foul-resistant engine exhaust emission sensors. No presently available devices combine the requisite sensitivity and selectivity to hydrocarbons, CO, CO2, and NOx with thermal and chemical robustness, low power drain, rapid response, and reasonable cost. Boston MicroSystems, Inc., proposes to develop a hand-held portable engine emissions analyzer that ...

    SBIR Phase I 2001 Environmental Protection Agency
  6. Cryptosporidium Detection System

    SBC: CIENCIA INC            Topic: N/A

    The Phase I objective is to develop a compact, low-cost, easy-to-use system for the rapid detection of Cryptosporidium oocysts. Two key innovations provide the foundation for Ciencia, Inc.'s system: (1) a dielectrophoretic field-flow-fractionation method to replace current filtering and centrifugation methods to concentrate the sample and remove nontarget organisms or nonbiological debris, and (2) ...

    SBIR Phase I 2001 Environmental Protection Agency
  7. Reduced Cost Sewer Pipe Relining Using Ultrasonic Lamination

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    During the Phase I program, Foster-Miller developed techniques based on Ultrasonic Tape Lamination (UTL) for joining of plasticized PVC sewer pipe liner. This effort was undertaken in response to a need for environmentally sound and cost-effective methods for rehabilitation of aging water and sewerage pipe rehabilitation infrastructure. Ultrasonic lamination has several significant advantages over ...

    SBIR Phase I 2001 Environmental Protection Agency
  8. Recycled Materials for Repair and Rehabilitation of Aging Concrete Structures

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    Exterior wrapping of concrete columns initially was developed for seismic reinforcement in high-risk areas such as California. As the technology has gained acceptance, it is being considered for use in extending column life, reducing corrosion, and preventing spalling. All composite wrapping systems utilize some form of a fiber-reinforced thermoset material. For several reasons discussed below, fi ...

    SBIR Phase I 2001 Environmental Protection Agency
  9. High Lubricity Coatings for High Pressure Fuel Pumps

    SBC: INFRAMAT CORP            Topic: N/A

    Direct-injection (DI) fuel pumps operate on petroleum-based hydrocarbons that have inherent lubricating properties. DI fuel pumps that inject clean-burning liquid fuels with no lubricating properties (such as methanol or dimethyl ether) induce a major wear problem at the interface of the plunger and cylinder wall. Addition of a sacrificial liquid lubricant to reduce this wear would defeat the obje ...

    SBIR Phase I 2001 Environmental Protection Agency
  10. High Altitude Fuel Injection

    SBC: Mide Technology Corporation            Topic: N/A

    Mide Technology Corporation proposes to develop a fuel injection system for automotive combustion control. The design is composed of a fast-acting piezoelectric actuator to operate a fuel injection valve and emission sensors located in the exhaust, both used in concert with a rapid-learning control algorithm to reduce engine NOx, hydrocarbon (HC), and particulate emissions without sacrificing fuel ...

    SBIR Phase I 2001 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government