List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Miniature Elctrohydraulic Total Artificial Heart

    SBC: ABIOMED, INC.            Topic: N/A

    The limited availability of donor hearts for people with end stage heart failure has driven the condevelopment of mechanical circulatory support systems (MCSSs). MCSSs can be broadly classified intocontinuous flow systems. Pulsatile systems drive blood indirectly through blood pumps, resulting inThis disadvantage of these systems, however, is their relatively large size. Continuous flow systemssim ...

    SBIR Phase I 1995 Department of Health and Human Services
  2. Remote Suture Placement--Laparoscopic Abdominal Surgery

    SBC: ABIOMED, INC.            Topic: N/A

    Minimal access abdominal surgery through the laparoscope has generally replaced surgical procedureslaparotomy for several common procedures, including cholecystectomy and appendectomy. More complicatgastrointestinal operations are also being attempted laparoscopically. Many of these procedures aretechniques which are not yet standard laparoscopic techniques. A basic surgical technique necessarythe ...

    SBIR Phase I 1995 Department of Health and Human Services
  3. Development of Calcification Resistant Valve Prosthesis

    SBC: ABIOMED, INC.            Topic: N/A

    Calcification of blood contacting surfaces has been the key impediment to the development of polymevalve prostheses and other polymeric implantables. The deposition of calcium plaques as hydroxyapatiand potentially leads to valve dysfunction. That calcification proceeds preferentially along surfacestress only exacerbates the problem. This work is based on the hypothesis that calcification along fa ...

    SBIR Phase I 1995 Department of Health and Human Services
  4. Laparoscopic Enterocystoplasty with Laser Welding

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Health and Human Services
  5. Bearingless Disposable Centrifugal Blood Pump

    SBC: ABIOMED, INC.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Health and Human Services
  6. Automated Dereverberated Model Identification

    SBC: Active Control eXperts, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 National Aeronautics and Space Administration
  7. Particle Sizing and Identification Through Advanced Light Scatter Techniques

    SBC: Ade Corp.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of Commerce
  8. Chemical Vapor Deposition of Beta-BaB2O4 (BBO) for Integrated Nonlinear Optics

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The superior optical properties of BBO and its applicability in frequency doublers and waveguides justifies development of thin film deposition processes which can be integrated with microelectronic processing. The high damage threshold of BBO, a necessary component for device integrity, is a major advantage over other nonlinear optic materials. In Phase I, chemical precursors and a deposition pro ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  9. Multi-Spectral Semiconductor Ultraviolet Detector

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    We propose to demonstrate the feasibility of solar-blind, multi-spectral III-V nitride UV detectors which can meet the requirements of applications in both the military and commercial sectors (missile threat warning, UV search and track, environmental monitoring in gas turbines, and general flame detection). A novel aspect of our approach is the use of SiC as a substrate for these devices, which w ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  10. Chemical Vapor Desposition of PLZT for Low Cost SLM Manufacturing

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Spatial light modulators (SLM's) have been identified as critical elements in many optical computing and signal processing applications. Typically these devices use expensive bulk ceramics that result in high cost and difficult device integration. Ceramic materials in the PbLaZrTiO3 (PLZT) family of compounds show a unique combination of high transparency, large electrooptic effects and exceptio ...

    SBIR Phase I 1995 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government