You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Optical Instrumentation for MEMS Oscillatory Parallel-Plate Rheometer

    SBC: AGILTRON, INC.            Topic: 9060563R

    Leveraging Agiltron’s industrial leading developments for optical measurement of motion in MEMS devices, we propose to use electro-optical sensors for measuring the displacement and gap in the NIST micro-rheometer. No electrical connections are required to the moving parts. All electronics and optics are removed from the chip so that it is inexpensive and disposable. A fixed, simple micro-fluidi ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  2. High Speed and High Sensitivity Quadrant Photodetector

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: 912085R

    To further advance the characterization and utility of microcantilevers, next generation optical detectors with higher frequency response, improved displacement resolution and lower noise for weak signal detection are needed. Consequently, Radiation Monitoring Devices, Inc. (RMD) will develop a turnkey optical detector module for use in characterizing the displacement and resonant frequencies of m ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology
  3. Efficient isomer-selective biosynthesis of pinene from cellulosic feedstocks

    SBC: PHYSICAL SCIENCES INC.            Topic: N10BT046

    There is a need to find more efficient methods for producing high-density, liquid, tactical fuels for use in missile propulsion or as components to improve key performance characteristics of currently available jet and diesel fuels. Generation of such fuels from renewable sources such as waste cellulose, grasses, waste agricultural material and forestry products will provide important national sec ...

    STTR Phase I 2011 Department of DefenseNavy
  4. Bioengineering Saccharomyces cerevisiae for the Selective Production of beta-Pinene

    SBC: IMPACT Technology Development            Topic: N10BT046

    This technology development program addresses the market and strategic need for renewable high density fuels for missile propulsion or as additives to increase performance of jet propulsion fuels. beta-Pinene, a natural plant derived organic compound, is the proposed high density fuel precursor. In the Phase 1 project, we will demonstrate the feasibility of this approach by: 1) engineering a strai ...

    STTR Phase I 2011 Department of DefenseNavy
  5. High Voltage, Lightweight, Conformal, Integrated, Photovoltaic Modules for Unmanned Aerial Vehicles (UAVs)

    SBC: MC10 Inc.            Topic: N10BT048

    This Phase I effort will demonstrate a thin, conformal solar module(1 cm x 1 cm) composed of either GaAs or Si micro-cells packaged in an elastomeric film. This module will utilize unique mechanical designs, including non-planar interconnects, and thin micro-cells (10% efficiency and>10% stretchability while providing output of>25V. This effort will provide a pl ...

    STTR Phase I 2011 Department of DefenseNavy
  6. High Density, High Efficiency Electrical Power Generation System for UAS Applications

    SBC: Infoscitex Corporation            Topic: N11AT009

    Electric motors and generators have a long history of development, from the first halting steps to the intensive development in the 20th and 21st century. Consequently, motors and generators have become mature technologies that only see incremental improvements in performance. To achieve more than just incremental improvements in such parameters as power density and efficiency, a radical departure ...

    STTR Phase I 2011 Department of DefenseNavy
  7. High Fidelity Helicopter Lag Damper Model for Comprehensive Rotor Analysis

    SBC: Materials Technologies Corporation            Topic: N11AT010

    Helicopters with articulated rotor blades are subject to the well-known ground resonance where the rotor lag mode interacts, in an unstable fashion, with fuselage roll. To eliminate this ground resonance, both lag dampers and fuselage roll dampers are required. The Sikorsky UH-60 helicopter platform, which comprises the vast majority of utility rotorcraft used by the US Army and the Navy, relies u ...

    STTR Phase I 2011 Department of DefenseNavy
  8. Monolithic Beam-Combined Mid-Infrared Laser Array

    SBC: EOS Photonics            Topic: N11AT011

    EOS Photonics proposes to develop, together with MIT- Lincoln Laboratories, the next generation of high power quantum cascade laser (QCL) source with output power exceeding 15 Watts at a wavelength of 4.6 microns. The proposed subsystem will include a DFB QCL array integrated monolithically with power amplifiers, low-loss passive waveguides and optical elements aimed at realizing on-chip wavelengt ...

    STTR Phase I 2011 Department of DefenseNavy
  9. Monolithic Beam-Combined Mid-Infrared Laser Array

    SBC: Maxion Technologies, Inc.            Topic: N11AT011

    Maxion will develop a monolithic, beam combined array of phase-locked, buried heterostructure (BH) quantum cascade lasers (QCLs). The laser array will be designed to emit a low divergence optical beam in a direction normal to the array surface at a wavelength centered at 4.6 microns. The monolithic laser"s cw output power will exceed 15 Watts. Each ridge waveguide in the array of will contain a se ...

    STTR Phase I 2011 Department of DefenseNavy
  10. A Geolocation System With Accuracy Self-Awareness (ASA) to Enable Reduced Size/Cost Antenna Arrays

    SBC: SCIENTIFIC SYSTEMS CO INC            Topic: N11AT012

    The predominant method used in electronic support measure (ESM) systems to detect and geolocate noncooperative RF signals employs arrays of antennas to estimate signal angle of arrival (AOA). There are several issues that preclude wide installation of these, including very high cost, challenging installation requirements, size and weight, operation that requires highly trained specialists, and pro ...

    STTR Phase I 2011 Department of DefenseNavy
US Flag An Official Website of the United States Government