You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Biomass to Olefins by Catalytic Fast Pyrolysis
SBC: AERODYNE RESEARCH INC Topic: 02dAerodyne Research Inc. (ARI) and the Massachusetts Institute of Technology (MIT) plan to develop an efficient catalytic system to convert biomass into olefins for the production of hydrocarbons in the gasoline, diesel, and/or jet fuel range by way of catalytic fast pyrolysis. Conversion of lignocellulosic feedstocks from resources as varied as corn stover, grasses, wood, and sugar cane bagasse is ...
SBIR Phase I 2011 Department of Energy -
Ultra-High Strength Nanostructured Magnesium Alloy-Composite
SBC: Aspen Systems, Inc. Topic: 04eCurrent efforts of DOE to create future lightweight systems in order to attain significant energy saving, cost reduction and improved efficiency requires development of advanced nanostructured lightweight composite materials with improved ductility and high tensile strength. Magnesium (Mg) with a density of approximately two-thirds of aluminum is the lightest structural material. Despite this adva ...
SBIR Phase I 2011 Department of Energy -
Spiral Welded Wind Turbine Towers
SBC: Keystone Tower Systems, Inc. Topic: 07aLarge-scale wind turbine designs are significantly constrained by transportation limits. As utility scale wind turbines have developed, they have steadily increased in size and have seen a steady decrease in cost of energy. However, further increases in on-shore turbine size beyond 3MW are prohibited by hard limits in the size of components that can be economically transported to the wind farm sit ...
SBIR Phase I 2011 Department of Energy -
High Permeance Hybrid Membranes for CO2 Separation
SBC: ASPEN PRODUCTS GROUP INC Topic: 09aThe capability to efficiently remove carbon dioxide from industrial gas streams is desirable for a wide variety of applications. Carbon dioxide (CO2) is a byproduct of many industrial processes associated with the transformation of fossil fuels into usable products such as heat, electricity, and chemicals. In addition to being a greenhouse gas pollutant, the presence of carbon dioxide in chemical ...
SBIR Phase I 2011 Department of Energy -
Electrochemical Polymer Precursor Generation (EPPG)
SBC: SKYRE, INC Topic: 23cContinued global dependence on fossil fuels and concomitant release of CO2 has driven a societal push to mitigate CO2 emissions, largely through various means of sequestration. But implementation of carbon sequestration costs money and there are still unresolved environmental concerns, therefore, other approaches to mitigating net CO2 production and release are required. In an ideal model, emitted ...
SBIR Phase I 2011 Department of Energy -
Optimization of CO2- Coal Slurry
SBC: TIAX LLC Topic: 24aConsumption of coal and other fossil fuels is a major contributor to emission of carbon dioxide and criteria pollutants. Coal gasification technologies equipped with carbon capture and sequestration (CC & amp;S) technology can help address both these problems. However, current coal gasification concepts suffer from a combination of low efficiency and high capital cost. TIAX proposes to investigate ...
SBIR Phase I 2011 Department of Energy -
High Performance Catalytic Heat Exchanger for SOFC Systems
SBC: FuelCell Energy, Inc. Topic: 27bEfficient utilization of our nations fossil and renewable energy sources is a top priority to secure a sustainable energy future. Solid Oxide Fuel Cell (SOFC) based power systems represent an emerging technology that have the potential to produce clean electric power at nearly twice the efficiency of small-scale combustion engines and to nearly eliminate the release of NOx and SOx to the environme ...
SBIR Phase I 2011 Department of Energy -
Engineering High Resolution Scintillator for Next-Generation High Frame Rate Detectors
SBC: RADIATION MONITORING DEVICES, INC. Topic: 12aRecent developments in synchrotron radiation sources have generated an urgent need for high performance X-ray detectors. While new imaging devices have been developed that employ high performance CCD sensors, what is currently lacking in these detectors is an adequate X-ray-to-light converter that will provide high performance in terms of spatial resolution, high efficiency and, perhaps most impor ...
SBIR Phase I 2011 Department of Energy -
High Efficiency High Resolution Sensor for Hard X-Ray Microtomography
SBC: RADIATION MONITORING DEVICES, INC. Topic: 12eX-ray microtomography (XMT) is a powerful tool for researchers in a wide range of fields, allowing 3D imaging at the micron scale. Many of the DOE synchrotron tomography facilities are involved in research that requires hard X-rays (high energy, up to 100 keV) in order to get better penetration into metal samples. At these higher energies the scintillator quickly becomes the limiting factor result ...
SBIR Phase I 2011 Department of Energy -
Durable ALON Windows for High Power Accelerator Applications
SBC: SURMET CORP Topic: 13dMaterials currently used for high power RF accelerator applications are typically opaque in visible wavelengths. The use of ALON Optical ceramic will combine a high level of RF performance while simultaneously allowing the inside of superconducting cavities to be monitored for issues such as arcing. Scientist at Surmet will work closely with scientists at Thomas Jefferson Labs to collect the neces ...
SBIR Phase I 2011 Department of Energy