You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Process for On-Line Quality Control of Recycled Plastic Flake

    SBC: National Recovery Technologies LLC            Topic: N/A

    Generally, it is accepted that for plastics recycling to be economically viable in the long term, recycled resins must be competitive with virgin resins. To compete with virgin material, new applications must be made available for recycled resins. Such applications will require that the recycled resin be of a high purity level. Thus, many processors are requiring ever-tightening contamination limi ...

    SBIR Phase I 2001 Environmental Protection Agency
  2. DECOMPOSITION OF HIGH CONCENTRATION AQUEOUS TRICHLOROETHYLENE DERIVED FROM A PROPOSED SUPER FUND SITE BYSOLAR OR UV IRRADIATED PHOTOCATALYSTS

    SBC: Photo-catalytics Inc.            Topic: N/A

    N/A

    SBIR Phase I 1987 Environmental Protection Agency
  3. DEVELOPMENT OF A HIGHLY RELIABLE COST-EFFECTIVE CONTINUOUS MCONTINUOUS EMISSION MONITOR

    SBC: ADA TECHNOLOGIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1985 Environmental Protection Agency
  4. DEVELOPMENT OF A RETROFIT IN SITU THREE POINT AUDIT DEVICE FFOR TESTING OF LINEARITY AND CALIBRATION OF COMMERCIALLY AVAILABLE IN-STACK TRANSMISSOMETERS

    SBC: Eastern Technical Associates            Topic: N/A

    N/A

    SBIR Phase I 1985 Environmental Protection Agency
  5. Development of Recycled Glass Paving Materials

    SBC: Sandhill Industries            Topic: N/A

    Sandhill Industries, a woman-owned small business and manufacturer of glass wall and floor tile, has developed a process for manufacturing paving products made from 99 percent recycled soda-lime plate or container glass. The glass pavers are thinner, lighter, denser, stronger, and perform better in paving applications than brick or concrete. Furthermore, the manufacture of the glass pavers generat ...

    SBIR Phase I 2001 Environmental Protection Agency
  6. FEASIBILITY OF BIODEGRADATION OF WASTE LIQUID COAL TAR

    SBC: Bioremediation Consulting,            Topic: N/A

    COAL TAR IS A BY-PRODUCT OF THE COAL GASIFICATION PROCESS USED WIDELY BETWEEN 1820 AND 1950 TO PRODUCE A NATURAL GAS SUBSTITUTE. DURING THAT TIME, BILLIONS OF GALLONS OF TAR WERE PRODUCED AT MORE THAN 1500 GAS MANUFACTURING FACILITIESLOCATED THROUGHOUT THE U.S. A LARGE PORTION OF THIS WASTE TAR REMAINS IN STORAGE OR WAS DISPOSED OF BY INJECTION INTO SUBSURFACE SITES. COAL TAR IS A MIXTURE OF HYDRO ...

    SBIR Phase I 1987 Environmental Protection Agency
  7. Fresnel Sapphire Split Prism Spectrometer for Engine Emission Diagnostics

    SBC: Optra, Inc.            Topic: N/A

    OPTRA, Inc., is proposing a low-resolution ( 15 nm) Fresnel sapphire split-prism spectrometer specifically tailored to the identification of molecular species present in the emissions from an engine source. The proposed approach will examine the 3-5.5 ¿m spectral region, allowing for the extraction of concentration information of CO2, CO, NO, HCs, and particulate matter. Sapphire was chosen bec ...

    SBIR Phase I 2001 Environmental Protection Agency
  8. High Altitude Fuel Injection

    SBC: Mide Technology Corporation            Topic: N/A

    Mide Technology Corporation proposes to develop a fuel injection system for automotive combustion control. The design is composed of a fast-acting piezoelectric actuator to operate a fuel injection valve and emission sensors located in the exhaust, both used in concert with a rapid-learning control algorithm to reduce engine NOx, hydrocarbon (HC), and particulate emissions without sacrificing fuel ...

    SBIR Phase I 2001 Environmental Protection Agency
  9. High-Capacity Sorbent for Removal of Mercury from Flue Gas

    SBC: ADA TECHNOLOGIES, INC.            Topic: N/A

    In December 2000, EPA announced its intent to regulate the emission of mercury from coal-fired power plants. ADA Technologies, Inc., is developing a family of new disposable sorbents for this application. The sorbents consist of a natural silicate doped with chemicals to capture and immobilize vapor-phase mercury and mercury compounds. Laboratory testing in Phase I has shown the new materials to h ...

    SBIR Phase I 2001 Environmental Protection Agency
  10. Innovative Ultraviolet Light Source for Disinfection of Drinking Water

    SBC: Phoenix Science & Technology            Topic: N/A

    New regulations for drinking water treatment are leading to alternatives to chlorine disinfection. As a result, the use of ultraviolet (UV) light for disinfection is growing rapidly. The disinfection capability of commercial UV systems is limited by available mercury lamp technology. Phoenix Science & Technology's innovative Surface Discharge (SD) UV lamp is a promising candidate to both improve t ...

    SBIR Phase I 2001 Environmental Protection Agency
US Flag An Official Website of the United States Government