You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Multi-Sensor Hybrid System for Vehicle Classification of Thirteen Classes

    SBC: Migma Systems Inc.            Topic: 081FH4

    Image processing methods have been studied and implemented for the vehicle classification over the past decades. The most dominant approach is the use of vehicle dimension, which requires complex processes of sensor calibration as the vehicle dimensions shown in the imagery are heavily dependent on the camera’s field of view. In general, video systems have physical disadvantages related to the ...

    SBIR Phase II 2013 Department of Transportation
  2. Environmentally-Benign Polytetrafluoroethylene (PTEE) Coating for Mold Release

    SBC: GVD CORP            Topic: C

    GVD proposed to develop high performance, VOC-free and PFOA-free, non-stick mold release coating based on its novel PTFE (Polytetraflouroethylene) fluoropolymer technology. Most commercial mold release agents make use of organic solvents and vaporize during drying, creating a significant air quality impact. Even water-based formulations often require the use of fluorinated surfactant additives to ...

    SBIR Phase II 2013 Environmental Protection Agency
  3. Size-Selection Aerosol Characterization Instrument

    SBC: AERODYNE RESEARCH INC            Topic: G

    We propose to develop anew monitor that provides composition information of particles in the ultrafine (10-100 nm) fine (100 nm– 2.5 µm) and coarse (2.5 – 10 µm) size modes in near real time. Particle monitoring technologies are important for better characterization of the environmental, health and visibility effects of both anthropogenic and biogenic aerosol particles. Current monitoring t ...

    SBIR Phase II 2013 Environmental Protection Agency
  4. Remote Electronic Medical Devices using the Integrated Clinical Environment (REMDICE)

    SBC: DocBox Inc            Topic: SOCOM13003

    Generation of a single platform with multiple functional units requires a"fresh"approach. Battlefield CONOPS requires the immediate availability of multiple sensors and active devices. The sensors include: ultrasound, capnography, blood pressure measurement using non-invasive techniques, pulse oximetry, non-invasive hemoglobin measurement, electrocardiography and video laryngoscopy. Each of the ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  5. Over the Horizon Underwater Communications

    SBC: Megawave Corporation            Topic: SOCOM13002

    In this proposal we describe our approach and anticipated results concerning the use of a novel and innovative method for providing Over-The-Horizon (OTH) L-band links between a submerged tracking device and an overhead satellite without the requirement for an on or above surface antenna. The encapsulation of an antenna in a dielectrically compensating tethered cocoon that includes a sensor and m ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  6. Solid State Sensor System for Inspection of Prestressed Concrete Pressure Pipe

    SBC: RADIATION MONITORING DEVICES, INC.            Topic: A

    An important type of water pipe is the Prestressed Concrete Cylinder Pipe (PCCP). There are thousands of miles of PCCP installed in the US in sections with length up to 20 feet and diameter for 2 to 14 feet. The large size of the pipes, the thickness of the concrete (up to 10 inches) and the composite construction, which involved concrete, high strength prestressing steel wires and sheet steel c ...

    SBIR Phase I 2013 Environmental Protection Agency
  7. A Low-Cost Rare Earth Elements Recovery Technology

    SBC: PHYSICAL SCIENCES INC.            Topic: B

    Physical Sciences Inc. and the University of Kentucky Center for Applied Energy Research propose to develop a unique enabling technology to significantly reduce U.S. dependency for Rare Earth Elements (REE) on foreign suppliers and our global competitors. Our innovation is a process that utilizes very inexpensive and abundant domestic raw materials for high-yield and low-cost generation of REE in ...

    SBIR Phase I 2013 Environmental Protection Agency
  8. Acrolein Monitor using Quantum Cascade Laser Infrared Absorption

    SBC: AERODYNE RESEARCH INC            Topic: 06NCERP1

    Acrolein (CH2 = CHCHO) is a toxic unsaturated aldehyde that has been classified by the U.S. Environmental Protection Agency (EPA) as a hazardous air pollutant (HAP) because of its adverse health effect, particularly on respiratory systems. There are both anthropogenic and natural sources of acrolein in the environment. Acrolein is produced by combustion sources (e.g., vehicle exhaust, prescribed a ...

    SBIR Phase II 2007 Environmental Protection Agency
  9. High Resolution Long Wave Infrared Focal Plane Array Development

    SBC: NANTERO, INC.            Topic: SOCOM07005

    Infrared (IR) detection is an integral part of the Global War on terrorism. Vandium Oxide based micro-bolometers are the current state of the art in uncooled IRFPA. The need for higher resolution 1280X960 arrays that operate at low power for man-portable applications include 24 hour surveillance and targeting . Carbon Nanotube (CNT) based IR detectors could fill this need. CNTs have unique electri ...

    SBIR Phase I 2007 Department of DefenseSpecial Operations Command
  10. Megapixel Uncooled Photomechanical LWIR Imager

    SBC: AGILTRON, INC.            Topic: SOCOM07005

    Agiltron has developed a breakthrough modular IR imaging technology that employs a photomechanical effect, in which an array of micro-machined sensor pixels converts IR radiation into visible light signals that can be optically detected by commercial off-the-shelf CMOS or CCD visible-light imagers. With commercial CMOS imagers achieving multi-megapixel resolution, the resolution of the modular Agi ...

    SBIR Phase I 2007 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government