You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Dip and Read Nanosensor for Calcium Ion Measurement in Sea Water

    SBC: Polestar Technologies, Inc.            Topic: 822R

    The topic (8.2.2R) requires the capability for enabling high sensitive/high precision measurements of calcium concentrates in seawater. The proposal aims to demonstrate the feasibility of a novel high sensitive nanosensor that can be used to determine very low concentrations of calcium in seawater in the presence of large backgrounds calcium concentration. The sensor approach will use the benefi ...

    SBIR Phase I 2012 Department of Commerce
  2. A Single Aperture Dual-Wavelength Dual-Polarized Antenna for AWRAP

    SBC: REMOTE SENSING SOLUTIONS, INC.            Topic: 834D

    Severe weather impacts our daily lives, society and the world economy. From an average of $10B annual loss due to tropical cyclones since 1900 to $200B in the commercial shipping industry, which is threatened by severe ocean storms to the hundreds of lives and assets lost in the $20B recreational boating industry. In these cases and many more, accurate now casting and forecasting could prevent the ...

    SBIR Phase II 2012 Department of Commerce
  3. Size-Selection Aerosol Characterization Instrument

    SBC: AERODYNE RESEARCH INC            Topic: G

    Problem Statement: In order to obtain energy independence from conventional sources, there is a significant interest in the production of biogas and“green energy” during wastewater treatment. Due to increased emphasis on sustainability and potential for additional revenue streams, utilities are expected to adopt energy production from digester gas in the near future. Although biogas from tr ...

    SBIR Phase I 2012 Environmental Protection Agency
  4. Environmentally-Benign Polytetrafluoroethylene (PTEE) Coating for Mold Release

    SBC: GVD CORP            Topic: C

    GVD proposed to develop high performance, solventless and PFOA-free, non-stick mold release coatings based on its novel PTFE fluoropolymer technology. Most commercial mold release agents make use of organic solvents that when liberated during the drying process may have a significant air quality impact. The drying/curing process may also be energy intensive, requiring additional consumption of f ...

    SBIR Phase I 2012 Environmental Protection Agency
  5. Fourier Transform Infrared Phase Shift Cavity Ring Down Spectrometer

    SBC: Optra, Inc.            Topic: G

    OPTRA has developed a novel approach to phase shift cavity ring down spectroscopy (PS-CRDS) using a Fourier transform infrared (FTlR) modulator to impose the spectrally-dependent amplitude modulation on a broadband JR light source. As with previous PS-CRDS measurements, we excite a resonant cavity with amplitude modulated energy and measure the phase shift of the modulated signal exiting the cavit ...

    SBIR Phase II 2012 Environmental Protection Agency
  6. Ka-band Spread Spectrum

    SBC: EMAG TECHNOLOGIES, INC.            Topic: SOCOM12001

    EMAG Technologies, Inc. (Ann Arbor, MI) is responding to a US Special Operations Command solicitation for a Wideband Global SATCOM (WGS) certified Ka-Band antenna. The solicitation requests the development and integration of a WGS-certified, low-visibility, small-form-factor commercial and military capable Ka-band spread spectrum antenna (KSSA) including the software for the modem to support Ka Sp ...

    SBIR Phase I 2012 Department of DefenseSpecial Operations Command
  7. Facial Signature Reduction

    SBC: Bambu Vault LLC            Topic: SOCOM12004

    Reducing the personal signature of the warfighter, while simultaneously allowing him to"see, breathe and hear"is critical to mission success. Methods of concealment that are suitable for the body do not adequately mask the face without hindering the ability to"see, breathe and hear". To address the need for reducing signature in the Visible and NIR/SWIR region Performance Indicator, LLC (PI) pro ...

    SBIR Phase I 2012 Department of DefenseSpecial Operations Command
  8. Optical Instrumentation for MEMS Oscillatory Parallel-Plate Rheometer

    SBC: AGILTRON, INC.            Topic: 9060563R

    Leveraging Agiltron’s industrial leading developments for optical measurement of motion in MEMS devices, we propose to use electro-optical sensors for measuring the displacement and gap in the NIST micro-rheometer. No electrical connections are required to the moving parts. All electronics and optics are removed from the chip so that it is inexpensive and disposable. A fixed, simple micro-fluidi ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  9. An Integrated Decision Support Framework for Sustainability CAE

    SBC: BIMCON Inc.            Topic: 9050273R

    The objective of this proposal is to establish the feasibility of developing an integrated decision support framework that transforms the current time-consuming and reactive (post completion of final design) sustainability assessment into a proactive CAE approach that enables the ability to revise designs based on performance against selected sustainability targets in the product design process, i ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  10. Decision Support Tools for Sustainable Manufacturing

    SBC: BIMCON Inc.            Topic: 907012R

    Our vision is that of an integrated decision support solution that transforms the current time-consuming and reactive (post-design) sustainability assessment of a product into a proactive approach available in the early design phases. This solution called Sustainability Integrated into Early Design (SIED) will deliver lifecycle sustainability data into early design processes and focus primarily on ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government