List

Accurate high-performance, low-cost handheld devices are needed by law enforcement and first responders for the detection, identification, classification and reporting of radioactive materials. The goal of this program is to produce a compact, low-power radiation identifier that costs less than $500 to make and communicates with a smartphone or tablet for computational analysis. CapeSym will lever ...

RMD is proposing the development of Smart-Phone Enabled Radionuclide Identifier (SERI), a new detection instrument designed to take full advantage of smartphone / tablet technology. The hardware platform will include a new advanced scintillator that will provide both high gamma-ray efficiency and spectroscopic performance, but also provide high neutron efficiency. The unit will communicate wireles ...

In the Phase I program, TIAX LLC developed a detection methodology that was able to measure significant differences between pairs of counterfeit and authentic products in four different product categories. Establishing the proof-of-concept of this technique creates the potential for a new detection methodology that can be utilized at a port of entry by U.S. Customs and Border Protection (CBP) to i ...

BlueRISC's proposed solution provides a fundamentally new approach to enable autonomous detection of exploitation attempts as well as healing of silent vulnerabilities. It follows a hybrid approach consisting of (i) new static silent vulnerability point and associated path pre-characterization concepts, and (ii) the insertion of minimal and low-overhead runtime support enabled by the vulnerability ...

The widespread use and deployment of laser systems has led to the need for laser exposure measurement systems that operate over wide spectral range and provide sufficient dynamic range to measure exposure relative to maximum permissible exposure (MPE) limits and establish normal hazard zones. OPTRA, Inc. proposes a solution based on the complementary combination of CMOS readout integrated circuit ...

The proposed SW-dMTM mobile security solution is lean and fully-software-based. The goal is to provide the required Roots of Trust (RoTs) and trusted security services via a fully software implementation while maintaining the heightened level of assurance typically only achieved through additional, security-centric hardware. This will be achieved by building a solution that is not only compatibl ...

Laser beams present potentially serious hazards to the human eye. Retinal damage can occur for laser eye exposure to milliwatts power levels. The purpose of this proposed program is to develop a portable system for detecting and measuring radiant exposure resulting from laser beams, and to determine whether the detected radiant exposure levels exceed established maximum permissible exposure (MPE ...

"Current glass-based transparent armor has two major deficiencies: 1) It is very heavy, and therefore can compromise performance and helicopter transportability of vehicles; and 2) It is very thick, and therefore can compromise visual signature of vehicles. Advanced technology ceramic transparent armor removes both these deficiencies and provides a twofold improvement in performance, but costs 6-1 ...

Triton Systems Inc.(Triton), together with our partner Technical Products Inc. (TPI) will conduct a feasibility study to evaluate options for armoring non standard commercial vehicles (NSCV) in an unobtrusive fashion using austere mechanical facilities corresponding to expedient basing in the area of operations. Triton has wide experience in metallic, ceramic and composite armoring solutions and ...

High speed combatant craft utilized by SOCOM, such as the Riverine (SOC-R), use pumped raw water to provide engine cooling for the twin marine diesel engines. While raw water provides an essentially limitless heat sink, it often contains debris which can clog engine strainers, causing the engines to overheat. Thus, engine performance, as well as maintenance, is negatively affected by the use of th ...