Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Transparent Armor Materials and Manufacturing Methods

    SBC: SURMET, CORP.            Topic: SOCOM14002

    "Current glass-based transparent armor has two major deficiencies: 1) It is very heavy, and therefore can compromise performance and helicopter transportability of vehicles; and 2) It is very thick, and therefore can compromise visual signature of vehicles. Advanced technology ceramic transparent armor removes both these deficiencies and provides a twofold improvement in performance, but costs 6-1 ...

    SBIR Phase I 2014 Department of DefenseSpecial Operations Command
  2. Inconspicuous Up-Armoring of Vehicles Using Segmented Ceramic and Metallic Elements

    SBC: Triton Systems, Inc.            Topic: SOCOM14003

    Triton Systems Inc.(Triton), together with our partner Technical Products Inc. (TPI) will conduct a feasibility study to evaluate options for armoring non standard commercial vehicles (NSCV) in an unobtrusive fashion using austere mechanical facilities corresponding to expedient basing in the area of operations. Triton has wide experience in metallic, ceramic and composite armoring solutions and ...

    SBIR Phase I 2014 Department of DefenseSpecial Operations Command
  3. Low Profile Closed Coolant System for High Speed Combatant Craft

    SBC: TIAX LLC            Topic: SOCOM14005

    High speed combatant craft utilized by SOCOM, such as the Riverine (SOC-R), use pumped raw water to provide engine cooling for the twin marine diesel engines. While raw water provides an essentially limitless heat sink, it often contains debris which can clog engine strainers, causing the engines to overheat. Thus, engine performance, as well as maintenance, is negatively affected by the use of th ...

    SBIR Phase I 2014 Department of DefenseSpecial Operations Command
  4. Remote Electronic Medical Devices using the Integrated Clinical Environment (REMDICE)

    SBC: DocBox Inc            Topic: SOCOM13003

    Generation of a single platform with multiple functional units requires a"fresh"approach. Battlefield CONOPS requires the immediate availability of multiple sensors and active devices. The sensors include: ultrasound, capnography, blood pressure measurement using non-invasive techniques, pulse oximetry, non-invasive hemoglobin measurement, electrocardiography and video laryngoscopy. Each of the ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  5. Over the Horizon Underwater Communications

    SBC: Megawave Corporation            Topic: SOCOM13002

    In this proposal we describe our approach and anticipated results concerning the use of a novel and innovative method for providing Over-The-Horizon (OTH) L-band links between a submerged tracking device and an overhead satellite without the requirement for an on or above surface antenna. The encapsulation of an antenna in a dielectrically compensating tethered cocoon that includes a sensor and m ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  6. Megapixel Uncooled Photomechanical LWIR Imager

    SBC: AGILTRON, INC.            Topic: SOCOM07005

    Agiltron has developed a breakthrough modular IR imaging technology that employs a photomechanical effect, in which an array of micro-machined sensor pixels converts IR radiation into visible light signals that can be optically detected by commercial off-the-shelf CMOS or CCD visible-light imagers. With commercial CMOS imagers achieving multi-megapixel resolution, the resolution of the modular Agi ...

    SBIR Phase I 2007 Department of DefenseSpecial Operations Command
  7. High Resolution Long Wave Infrared Focal Plane Array Development

    SBC: NANTERO, INC.            Topic: SOCOM07005

    Infrared (IR) detection is an integral part of the Global War on terrorism. Vandium Oxide based micro-bolometers are the current state of the art in uncooled IRFPA. The need for higher resolution 1280X960 arrays that operate at low power for man-portable applications include 24 hour surveillance and targeting . Carbon Nanotube (CNT) based IR detectors could fill this need. CNTs have unique electri ...

    SBIR Phase I 2007 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government