Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Low Profile Closed Coolant System for High Speed Combatant Craft

    SBC: TIAX LLC            Topic: SOCOM14005

    High speed combatant craft utilized by SOCOM, such as the Riverine (SOC-R), use pumped raw water to provide engine cooling for the twin marine diesel engines. While raw water provides an essentially limitless heat sink, it often contains debris which can clog engine strainers, causing the engines to overheat. Thus, engine performance, as well as maintenance, is negatively affected by the use of th ...

    SBIR Phase I 2014 Department of DefenseSpecial Operations Command
  2. Inconspicuous Up-Armoring of Vehicles Using Segmented Ceramic and Metallic Elements

    SBC: Triton Systems, Inc.            Topic: SOCOM14003

    Triton Systems Inc.(Triton), together with our partner Technical Products Inc. (TPI) will conduct a feasibility study to evaluate options for armoring non standard commercial vehicles (NSCV) in an unobtrusive fashion using austere mechanical facilities corresponding to expedient basing in the area of operations. Triton has wide experience in metallic, ceramic and composite armoring solutions and ...

    SBIR Phase I 2014 Department of DefenseSpecial Operations Command
  3. Advanced Opaque Armor Materials and Manufacturing Methods

    SBC: UTILITY DEVELOPMENT CORP            Topic: SOCOM14003

    ""The objective will be to develop and evaluate a low cost, light weight armor package that will have reduced visual signature while offering high protection against threats for Non Standard Commercial Vehicles (NSCV). UDC will conduct design studies to determine the maximum thickness, weight and geometry, visual signature of the armor package. The ballistic testing will be performed with 50 calib ...

    SBIR Phase I 2014 Department of DefenseSpecial Operations Command
  4. Advanced Transparent Armor Materials and Manufacturing Methods

    SBC: SURMET, CORP.            Topic: SOCOM14002

    "Current glass-based transparent armor has two major deficiencies: 1) It is very heavy, and therefore can compromise performance and helicopter transportability of vehicles; and 2) It is very thick, and therefore can compromise visual signature of vehicles. Advanced technology ceramic transparent armor removes both these deficiencies and provides a twofold improvement in performance, but costs 6-1 ...

    SBIR Phase I 2014 Department of DefenseSpecial Operations Command
  5. Remote Electronic Medical Devices using the Integrated Clinical Environment (REMDICE)

    SBC: DocBox Inc            Topic: SOCOM13003

    Generation of a single platform with multiple functional units requires a"fresh"approach. Battlefield CONOPS requires the immediate availability of multiple sensors and active devices. The sensors include: ultrasound, capnography, blood pressure measurement using non-invasive techniques, pulse oximetry, non-invasive hemoglobin measurement, electrocardiography and video laryngoscopy. Each of the ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  6. Over the Horizon Underwater Communications

    SBC: Megawave Corporation            Topic: SOCOM13002

    In this proposal we describe our approach and anticipated results concerning the use of a novel and innovative method for providing Over-The-Horizon (OTH) L-band links between a submerged tracking device and an overhead satellite without the requirement for an on or above surface antenna. The encapsulation of an antenna in a dielectrically compensating tethered cocoon that includes a sensor and m ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  7. Nano-scale Coatings for the Protection of Electronics and Sensitive Equipment in Marine Environments

    SBC: NEI CORPORATION            Topic: SOCOM13001

    We propose to advance the state-of-the-art of durable superhydrophobic coatings for application on printed circuit boards (PCBs) found on underwater vehicles exposed to hydrostatic pressures up to ~10 atm, corresponding to depths of ~100 meters in fresh or salt water, through a combination of NEI"s in-house coating materials development and evaluations of existing nanostructured water-repellent co ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  8. Nano-scale Coatings for the Protection of Electronics and Sensitive Equipment in Marine Environments

    SBC: UTILITY DEVELOPMENT CORP            Topic: SOCOM13001

    The objective will be to develop nano-scale coatings for protection of electronics and other sensitive items from seawater and fresh water. A thorough analysis of various commercial and academic superhydrophobic nanoscale coatings will be conducted for protection of electronics from salt fog, seawater and fresh water. Coatings will be procured from the commercial marketplace, internally from UDC ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  9. Next Generation Portable Power Amplifier

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: SOCOM13004

    In response to the SOCOM 13-004 Next Generation Portable Power Amplifier solicitation, MaXentric proposes the GreenAmp-lite system. The GreenAmp- & #8208;lite combines MaXentric"s envelope tracking technology with a power amplifier MMIC in a single small footprint package. This tight integration is made possible through the extremely high efficiency and low power dissipation provided by envelope t ...

    SBIR Phase I 2013 Department of DefenseSpecial Operations Command
  10. Fast Curing Modular Composite Patch System for Field Applications

    SBC: Continuum Dynamics Inc            Topic: SOCOM07002

    SOCOM requires a method to field repair multiple materials as well as to mount armor and related hardware for a variety of tactical purposes with a composite material. To address this need, we propose application of a “Modular UV Patch” (MUVP) system that incorporates ultraviolet curing resin systems and an innovative technique for delivering the UV light through optically lossy fibers that f ...

    SBIR Phase I 2007 Department of DefenseSpecial Operations Command
US Flag An Official Website of the United States Government