Award Data

ACX proposes an innovative new process for the manufacture of smart structures using a High Velocity Oxy-Fuel (HVOF) thermal spray process. This simple, multi-step process will be capable of depositing electroded piezoceramic coatings. The coatings will be poled while still hot, reducing poling times and voltages while increasing poling efficiency. Process times will be extremely short. The pr ...

Infrared tunable diode laser spectrometers provide a highly effective means of measuring trace concentrations, with either remote sensing or with advective sampling. It is often desirable to measure more than one trace gas at a time. This is especially true when gas emissions are strongly correlated, such as in combustion emissions where measuring both the CO2 concentration and another minor con ...

The trend toward replacement of highly toxic chemicals with less hazardous alternatives has created the demand for replacement of chromate conversion coatings for corrosion protection of aluminum alloys. Aluminum alloys are the predominate structural material used in aircraft because of their high strength-to-weight ratios, affordability and processability. Aluminum is subject to catastrophic fail ...

The use of enzyme-linked immunosorbent assay (ELISA) to detect contaminants such as solvents, fuels, and pesticides in soil and water samples is now well established. Although ELISA and related methods can facilitate analysis of samples, several washing and separation steps are involved that require 30 to 120 minutes per sample to reach equilibrium. Recently, near infrared fluorescence immunoassa ...

N/A

In this Phase I SBIR program we propose to develop a novel high voltage (5V) lithium-ion battery suitable for portable electronics equipmentand transportation applications. Lithium-ion batteries are already commercially available and typically consist of carbon anode, non-aqueous electrolyte and lithium transition metal oxide cathode such as LiCoO2, LiNiO2 or LiMnO4. These systems have an operat ...

Eikos LLC will evaluate two approaches, millimeter waves and opto-acoustics, for locating edges and holes in substructure that are hidden under exterior panels and skins during aircraft assembly. These devices will work in a camera-like fashion to allow non-destructive remote imaging. Eikos has developed promising approaches to both techniques that have the potential to be low cost and easy to u ...

Eikos LLC will modify and enhance the chemistry of the NRL developed phthalonitrile resin to meet the 700F TOS requirements of high temperature RTM and RFI aerospace composites. Eikos is intimately familiar with the chemistry of the phthalonitrile resin because of our efforts to scale the production of the current bases resin from the laboratory to the pilot plant. Eikos has teamed with McConne ...

The contractor proposes a new approach to underwater imaging that directly converts a two-dimmensional acoustic pressure wave into an electronic requirements fo convential piezo-element arrays. The imager relies on the piezo-birefringent properties of a nematic liquid crystal panel that serves as both sensor and display. The capability of nematic liquid crystals has been established and publishe ...

This SBIR program would develop practical methods for the interconnection, addressing and control of large numbers of distributed MEMS-based sensing and actuation elements using optical fiber multiplexing techniques. Such interconnected sensor/actuator arrays have immediate and long-term applications in the instrumentation and control of adaptive aircraft, spacecraft and hydrocraft structures, fl ...