Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Quantum Cascade Laser Monitor for N0, N02 and 03

    SBC: Aerodyne Research, Inc.            Topic: N/A

    This project will design and deliver a high accuracy monitor for the photo-chemically coupled pollutants nitric oxide, nitrogen dioxide and ozone using infrared absorption spectroscopy with quantum cascade (QC) lasers. The target molecules are monitored at air quality stations worldwide using instruments which require frequent calibration and are subject to significant chemical interferences (in t ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  2. Monolithic Semiconductor Light Source with Spectral Controllability

    SBC: AHURA CORPORATION, INC.            Topic: N/A

    Solid-state light sources promise many advantages over traditional technologies. Among these advantages is the ability to construct a source whose relative spectral distribution can be tuned to better match a desired spectrum. We propose addressing this technical and market opportunity through the development of a novel single-chip semiconductor device which delivers high optical output power (>20 ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  3. Novel 2-D Digital Imaging Detector for Thermal Neutrons

    SBC: Radiation Monitoring Devices, Inc.            Topic: N/A

    The use of thermal neutrons has been widespread over the past several decades in many investigations such as non-destructive testing (NDT), neutron radiography and macromolecular crystallography. For some applications such as crystallographic diffraction studies, neutrons are scattered over 4o in space and an ideal detector would be able to image the scattered radiation on a spherical surface. Cur ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  4. Robust MEMS Viscosity Meter for Condition-based Maintenance

    SBC: BOSTON MICROSYSTEMS INC            Topic: N/A

    In this NIST SBIR program Boston MicroSystems develops MEMS-based fluid viscosity-density sensors which can be installed in refrigerant system compressors to monitor, in real time, refrigerant system health. Such sensors will provide early detection of water contamination, lubricant degradation and other problems which can lead to catastrophic refrigerant system failure if left uncorrected. Such s ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  5. A Photon Counting Fiber Optic Scintillator Dosimeter

    SBC: Boston Science            Topic: N/A

    A Photon Counting Fiber Optic Scintillator Dosimeter will be constructed to extend the range of useful measurements around low energy photon sources. A micromachined plastic scintillator will be bonded to the end of a fiber optic cable. A photon counting detector package will be constructed to receive the light from the scintillator and record the count rate. Neutral density filters will be employ ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  6. Improved Manufacturing Processes for Circular Array Detectors

    SBC: Detector Technology, Inc.            Topic: N/A

    The goal of phase 1 was to create a channel electron multiplier that could be used in an array for configuration in the synchrotron beam application. In order to have little variance in first strike statistics contamination needed to be eliminated from the surface. This was accomplished with phase 1 research. During Phase 2 the primary objective is to manufacture a circular array of multipliers th ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  7. Development of UltrastableTi:sapphire Lasers for Optical Clock and Spectroscopy Applications

    SBC: Kapteyn-Murnane Laboratories, Inc.            Topic: N/A

    This Small Business Innovation Research Phase 1 project proposes to develop a femtosecond laser system optimized for optical clocks and other precision metrology applications. In principle, atomic optical transitions have the potential to provide radically higher-accuracy timekeeping, because of the very high frequency of an optical transition. The problem of counting, or down-counting, the oscill ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  8. Standards Based Test Cases and Tools for CAE

    SBC: Softinway, Inc.            Topic: N/A

    A new generation of STEP is now coming on line with interfaces between CAD and CAE systems defined by AP 209. The goal of this proposal is to accelerate the deployment of a capability to exchange data between CAD and CAE systems by developing practical test cases for AP 209, as well as developing a software system tools to make the software deployment pilot programs practical. It is proposed to bu ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  9. Direct-Digital Phase & Amplitude Noise Measurement System

    SBC: TIMING SOLUTIONS            Topic: N/A

    We propose to compare alternative architectures for phase noise measurement by directly sampling the RF waveform. Out of band modulation and cross correlation will reduce noise. The capabilities of each architecture will be determined using analysis and simulation. The results will be used to determine the feasibility of developing a commercially useful measurement instrument. If the results are p ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  10. Surface Selective Chiral Detection: A New Metrology Technique

    SBC: Vescent Photonics LLC            Topic: N/A

    The near chiral purity of the biosphere leads to a vast array of chiro-specific physiological responses. This chiro-specificity, in turn, gives rise to the need for the manufacturing of enantiomerically pure chiral chemicals, such as pesticides, pharmaceuticals, food additives, pigments, etc. Critical to the efficacy of both chiro-specific biology and chiro-synthesis/separation are the interfacial ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government