You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Affordable Titanium Alloy Fittings and Other Discrete Parts by Powder Metal Manufacturing technology

    SBC: DYNAMET TECHNOLOGY, INC.            Topic: DLA10001

    The Defense Logistics Agency (DLA) procures significant quantities of Ti-6Al-4V hydraulic fittings in a wide range of types and sizes in maintaining legacy aircraft. These fittings are machined from forged preforms or, in the case of low volume procurement, are machined from wrought plate stock. The proposed technology is a radical

    SBIR Phase I 2011 Department of DefenseDefense Logistics Agency
  2. A Single Aperature Dual-Wavelength Dual Polarized Antenna for AWRAP

    SBC: REMOTE SENSING SOLUTIONS, INC.            Topic: 834D

    Severe weather impacts our daily lives, society and nation’s economy. From an average of $10B (2005 dollars) annual loss due to tropical cyclones since 1900 to $200B in the commercial shipping industry that is threatened by severe ocean storms to the hundreds of lives and assets being lost in the $20B recreational boating industry. In these cases and many more, accurate now-casting and forecasti ...

    SBIR Phase I 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  3. CBW Ensemble Pass-Through for A Man Mounted Microclimate Cooling System

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    Current CB protective ensembles impose a thermal burden on aircrew which not only limits mission time. but poses a physiological danger to aircrew operating in even moderate temperature environments~ A small man-mounted cooling system employing active liquid based technology would enhance mission effectiveness and prevent a hazardous rise in core body temperature. However, these state-of-the-art s ...

    SBIR Phase I 1998 Department of DefenseOffice for Chemical and Biological Defense
  4. CBW Low Profile Man-Mounted Filter And Blower Unit

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    There is an increasing threat of chemical and biological (CB) agents being used by hostile forces when USN aircrew could be exposed. Aircrews must wear special eye and respiratory protective equipment both before. During, and after flight operations, and transition between these states without compromising CB Protectionintegrity. Man-mounted CBW filter/blower units have previously been produced an ...

    SBIR Phase I 1998 Department of DefenseOffice for Chemical and Biological Defense
  5. Development of Native Kelp Culture System Technologies to Support Sea Vegetable Aquaculture in New England Coastal Waters

    SBC: OCEAN APPROVED, INC.            Topic: 817

    This Phase II research expands Phase I research on Saccharina latissima and is to design and develop “seed” nursery methodologies for the development of commercial-scale production of juvenile kelp plants including Alaria esculenta and Laminaria digitata. The project objectives include: 1. Isolate and maintain cultures of New England species of Alaria esculenta and laminaria digitata to be use ...

    SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Improved M8 Chemical Agent Detector Paper for Facilities Monitoring

    SBC: Orono Spectral Solutions Inc.            Topic: CBD11103

    The goal of this Phase I project is to develop coatings for M8 paper that improve its robustness and rate of detection of potential liquid/aerosol chemical warfare attack at fixed military sites and installations. A problem that is currently experienced with M8 paper is that it is easily contaminated by dust or destroyed by rain and thus requires frequent replacement in outdoor environments. Our ...

    SBIR Phase I 2011 Department of DefenseOffice for Chemical and Biological Defense
  7. Light Weight Chemical Protective Hand Wear

    SBC: Federal-Fabrics-Fibers, Inc.            Topic: N/A

    Current CBW protective flight handwear consists of three pairs of glo ves: an inner cotton liner glove for comfort and perspiration absorpt ion, a 7mil butyl rubber glove for agent protection and a nomex fligh t glove for fire protection. These three pairs of gloves when worn t ogether are very bulky and cumbersome making it very difficult to per form aircrew tasks that require high tactility, su ...

    SBIR Phase I 1998 Department of DefenseOffice for Chemical and Biological Defense
  8. Low noise longwave infrared (8-12µm) focal plane array with high sensitivity for passive hyperspectral standoff detection

    SBC: APPLIED NANOFEMTO TECHNOLOGIES LLC            Topic: CBD10105

    Longwave infrared (LWIR, 8-12µm) focal plane arrays (FPAs) play an important role in hyperspectral chemical and biological (CB) sensing and spectral imaging. Existing thermal detectors are unable to meet the high sensitivity and fast response requirements of many hyperspectral chemical and biological sensing applications. FPAs based on photon excited electron generation process can fulfill the sp ...

    SBIR Phase II 2011 Department of DefenseOffice for Chemical and Biological Defense
  9. MEMS Lamellar Based Interferometer for the Detection of Toxic Chemicals

    SBC: AGILTRON, INC.            Topic: CBD10104

    Leveraging on Agiltron industry leading development of optical MEMS devices and the PI experience with FTIR spectrometer design, we propose to develop a new class of high performance compact and rugged FTIR spectrometers for the LWIR optical range. The design is based on the MEMS lamellar mirror technique. Although this approach is not new, it has not yet been efficiently applied to LWIR, and per ...

    SBIR Phase II 2011 Department of DefenseOffice for Chemical and Biological Defense
  10. Method for Improving Precision Grinding Quality and Productivity

    SBC: COVENTRY ASSOCIATES, INC.            Topic: DLA10001

    The objective of this proposal is to develop a self calibrating, low cost adaptive precision grinding system which provides real time workpiece taper and Scientific Measurement and Adaptive Response Techniques (SMART) control. This system incorporates the knowledge gained during the previous 20 plus years of research to make grinding a science rather than an art. Our approach utilizes a unique rot ...

    SBIR Phase I 2011 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government