You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Water Properties Sensor

    SBC: Kaitech, Inc.            Topic: S108

    In this Phase II project, Kaitech proposes to develop and demonstrate a Water Properties Sensor (WPS) sensing system to synchronously measure the spectral inherent and apparent optical properties and the physical properties of oceanic, coastal, and fresh water. This single instrument will provide oceanographers with a small, easy to deploy, affordable, and adaptable integrated sensing system to co ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  2. Water Management Membrane for Fuel Cells and Electrolyzers

    SBC: Giner, Inc.            Topic: X703

    Development of an improved water management membrane for a static vapor feed electrolyzer that produces sub-saturated H2 and O2 is proposed. This improved membrane can increase the performance and especially the durability of static vapor feed electrolyzers. Static vapor feed electrolyzers greatly simplify electrolyzer systems as they eliminate the need for water/gas phase separation, which is p ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  3. Unmanned Aerial Vehicle Integration into the NAS

    SBC: Metron Aviation, Inc.            Topic: A301

    Technological innovations have enabled a wide range of aerial vehicles that can be remotely operated. Viable applications include military missions, law enforcement, border patrol, weather data collection, telecommunications, land use imaging, and cargo transport. NASA and other organizations have invested heavily in this unmanned aerial vehicle (UAV) research. UAVs can be flown in the National Ai ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
  4. Ultra-Compact Transmitter for Space-Based Lidar

    SBC: FIBERTEK, INC.            Topic: T901

    Fibertek, Inc. in partnership with researchers at the Pennsylvania State University Center for Innovative Materials Processing through Direct Digital Deposition (CIMP-3D) are proposing to develop a state of the art, space-qualifiable laser transmitter that meets the requirements of the flash lidar transmitter defined in the 2016 STTR subtopic T9.01, Navigation and Hazard Avoidance Sensor Technolog ...

    STTR Phase II 2017 National Aeronautics and Space Administration
  5. Ultra Compact Laser for 3D Imaging LIDAR

    SBC: Q-PEAK INCORPORATED            Topic: S401

    In response to NASA's solicitation for light-weight, power-efficient and radiation-hardened instruments that enable robotic exploration of the Solar System, especially Europa, Q Peak in partnership with Sigma Space proposes to develop a compact and robust LiDAR instrument to assist in the landing/sampling site selection process. Q-Peak's low SWaP and higher energy laser will extend the dynamic ran ...

    SBIR Phase II 2017 National Aeronautics and Space Administration
  6. Ultracapacitor Based Power Supply for CubeSats

    SBC: Fastcap Systems Corporation            Topic: S303

    Traditionally, the relatively small surface area and volume of a cube satellite has restricted the practical power limit of cube satellites. To the extent that the power will be generated by solar panels, cube satellites have a limited round trip energy budget. Increasing solar panel efficiency and complexity alleviates the energy issue to some degree. Both however, occur at the expense of the ori ...

    SBIR Phase II 2017 National Aeronautics and Space Administration
  7. Triton Composite Material For Lightweight Emi Shielding

    SBC: Triton Systems, Inc.            Topic: N/A


    SBIR Phase II 1998 National Aeronautics and Space Administration
  8. The Marine Debris and Small Object Mapping (DSOM) Radar System)

    SBC: REMOTE SENSING SOLUTIONS, INC.            Topic: 824D

    The DSOM system realized in a Phase II effort will provide a modular, compact and reconfigurable system with the ability to provide unique and new information about the scene of interest (e.g. temporal and height information) when compared with traditional SAR sensors. When compared with other imaging technologies, DSOM has the important advantages of being operable through cloud cover and at nigh ...

    SBIR Phase II 2017 Department of CommerceNational Oceanic and Atmospheric Administration
  9. Terahertz Quantum Cascade Laser Based 3D Imaging

    SBC: LONGWAVE PHOTONICS LLC            Topic: T701

    LongWave Photonics proposes a terahertz quantum-cascade laser based swept-source optical coherence tomography (THz SS-OCT) system for single-sided, 3D, nondestructive evaluation (NDE) of non-conductive materials. The THz SS-OCT system uses a frequency tunable QCL array to generate an interferometric signal between a reference mirror, and a sample. An algorithm is used to transform this signal in ...

    STTR Phase II 2011 National Aeronautics and Space Administration
  10. Tactile Data Entry System

    SBC: BARRON ASSOCIATES, INC.            Topic: O301

    Building on our successful Phase I Tactile Data Entry program, Barron Associates proposes development of a Glove-Enabled Computer Operations (GECO) system to permit suited crewmembers to perform virtual keyboard/mouse interactions using an instrumented EVA glove. The Phase II system will use two-hand motion tracking, multi-finger gesture recognition, and vibrotactile feedback to create an intuiti ...

    SBIR Phase II 2011 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government