Award Data

In this Phase II effort, PEMDAS Technologies and Innovations (PEMDAS), in collaboration with subcontractor Westover Studios, proposes to develop a functional prototype of the Weather “Action Chain” Enabler (ACE) application using the technologies identified, knowledge gained, and preliminary design conceived during the Phase I effort. As designed, the Weather ACE application will be a non-intr ...

The S‐100 specification is a new geospatial standard for hydrographic data, that is presently under development by the International Hydrographic Organization (IHO). Once the S‐100 based products and services are fully developed by the IHO, current datasets will be scheduled for obsolescence, and the Hydrographic Offices (HOs) will no longer produce them. Companies offering e‐navigation solu ...

TECHNICAL ABSTRACT: WR’s approach involves design of a modular, S-129 compliant Under Keel Clearance - Risk Management System (UKC-RMS). This will allow for the Electronic Chart Display and Information System (ECDIS), ECS, PPUs, and other situational awareness applications to have S-129 Exchange Sets developed for a planned route.In WR’s design, a system such as an ECDIS generates an S40X Rout ...

We accelerate the maturity of IntelliDrive applications and unlock the storehouse of modeling detail in TEXAS to organizations building IntelliDrive applications J2735/Dedicated Short Range Communication (DSRC) signal controllers and on-board IntelliDrive systems. We add four SAE J2735 messages: SPAT MapData Basic Safety Messages and Signal Request Message for emergency vehicle preemption. Mapping ...

There is a well defined, yet unfulfilled need for a convenient (non-contact, light weight) and rapid imaging tool for multi-directional, thru-wall stresses (both applied and residual) from the outside of a pipeline. Quantitative stress imaging is needed at mechanical damage and corrosion sites, as well as at other critical locations (dents, bends, etc.). JENTEK is uniquely positioned to deliver ...

TECHNICAL ABSTRACT: Buoyancy driven oceanographic gliders, although reasonably cost effective, have challenges operating in the zones due to high gradients in water density. Under this topic, Riptide will provide a cost-effective autonomous undersea vehicle (AUV) design leveraged from Riptide's family of man-portable AUVs that can more effectively map the hypoxic areas. The stated goals of this to ...

Evaluation of bridges for vulnerability to scour or other potential sources of damage requires knowledge of foundation conditions beneath piers and abutments that are often unknown. INFRASENSE proposed to develop and demonstrate a response-based parameter estimation method (RPEM) which will address the need for a simple, low-cost system for unknown foundation evaluation. The RPEM system is based ...

TECHNICAL ABSTRACT: R3 Digital Sciences, Inc. (R3-DS) proposes to develop and commercialize an extension kit for "Big-Eye" and other binoculars that will automatically compute and store distance and bearing assessments by combining vertical reticle and stereoscopy measurement with motion analysis techniques. It will also capture and store photographic and video evidence of what the observer sees t ...

This proposal seeks to produce a unique thermographic coating inspection system that is customized for the inspection of bridge coatings. The system uses active thermography where IR sources are used to provide controlled heating to a coating system. The presence of a defect in a coating system will result in differences in heat flow, which can be imaged with an infrared camera. An off-the-shel ...

In Phase I, we developed a prototype instrument for counting, sizing and identifying both non-toxic and toxic Harmful Algal Bloom (HAB) species. We did this by integrating three innovative technologies: High-throughput color, Light Field Imaging Flow Cytometry to acquire morphological information for each cell, Raman spectroscopy to acquire species-specific molecular information on pigments and tr ...